Pneumatic press

Schüco** 280 226

Condition: used, 7 pieces Bending tools for bending machine Nedjb D Ry Repfx Agwekw Length 3000 mm

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. Nedpfxoxnvq Eo Agwjkw 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Nkodpjwwlk Njfx Agwow

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. Nkedeycgtbspfx Agwjw The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Condition: good (used), Year of construction: 1998, machine/vehicle number: 25320, Offer 25282 Technical data: - Saw blade diameter: 600 mm - Cutting range at 90°: 190 x 190 mm / 100 x 310 mm - Mitre cut at 45°: 170 x 170 mm / 100 x 220 mm - Saw blade speed: 2800 rpm - Drive power: approx. 4.5 kW - Required space (approx.): W 1470 x H 1800 x D 1550 mm Nksdoxcwk Ajpfx Agwsw - Weight (approx.): 450 kg - Digital angle position indicator - Pneumatic system with pneumatic clamping cylinder - Saw blade - Outfeed roller conveyor with length stop and digital display, 5000 mm

Condition: good (used), Year of construction: 2014, machine/vehicle number: 9911832, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: HSK F63, tool diameter: 20 mm, tool length: 150 mm, tool weight: 3,000 g, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: Nkjdpeu Dl R Usfx Agwjw - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm - Centralised lubrication

Year of construction: 2019, condition: good (used), machine/vehicle number: 157, Offer 22273 Technical data: Nsdpfx Asiv Hz Degwekw - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - weight approx. 70 kg - with: - foot switch - machine base mobile W 600 x H 830 mm - Div. tools HUECK

Year of construction: 2012, condition: ready for operation (used), A Schüco double miter saw for aluminum profiles is available. Saw units: 2, max. cutting length: 6000mm, saw blade diameter: 500mm, bore: 32mm, max. miter angle: 22.5°, fixed stops: 90°/45°/22.5°, min. cutting length: 300mm. Machine dimensions X/Y/Z: approx. 7500mm/1800mm/2000mm, weight: approx. 2200kg. Documentation available. An on site inspection is possible. Nkjdpjyh Nv Tofx Agwew

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Maximum machining length: 3,100 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Njdpsxvp Nkjfx Agwekw Weight: approx. 3,000 kg Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Loading is included in the price

Condition: used, Year of construction: 1989, total height: 2,900 mm, total width: 1,800 mm, total length: 2,000 mm, Empty weight: 5.600 kg Price: On request - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 122692 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 900 - Table width [mm]: 630 - Ram width [mm]: 360 - Throat depth [mm]: 140 - Height adjustment [mm]: 63 - Motor power: 7.0kW - Transport dimensions: 2000mm x 1800mm x 2900mm (l x w x h) - Transport weight [kg]: 5600kg - Transport packages [pcs.]: 2 Nkodpfx Agew Hzvmjwew Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum