Press brake

Safan DNCS 110-3100

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes Gedpfx Asxacdvoafeuf * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank Gusdjlb I Daepfx Aafof - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm ALUMINUM 14 mm Gsdpewh Ulqsfx Aafouf OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Gjdpfjrfx Utsx Aafjuf Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm Gujdpfev Tpxqjx Aafof -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec Gedpfx Aaotqqr Rofeuf working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 The machine is ready for immediate use! Guedeur N Daspfx Aafef

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Gujdjlzizmjpfx Aafjf

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, PLEASE ONLY SERIOUS ENQUIRIES REGARDING VIEWINGS OF THE PRODUCTION LINE! WE DO NOT INTEND TO DISMANTLE THE LINE IN JANUARY; THE ADVERT COULD NOT BE PROGRESSED OTHERWISE. I am offering for sale a completely unique production line in Hungary. 1. The line manufactures trays suitable for storing 10 eggs, in either continuous or batch operation. From raw material preparation to final delivery, we are offering a complete system for sale. 2. The egg tray production line is located in Bátonyterenye, where a fully serviced industrial site provides all the infrastructure necessary for production. 3. The total output of the line is sold on the domestic market. The complete egg tray production line consists of several units: - Material preparation system, which processes waste paper into mouldable raw material. - HGHY egg tray forming unit, which finalises the trays by drying and hot-air pressing after moulding. - Palletising system, which makes the finished trays ready for transportation. - Auxiliary systems for air, vacuum, power, gas, and water supply. Godpfoya Eh Ejx Aafjuf

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze Gusdpfsu Idbyex Aafef number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *