Thickness planer

SAC RS63

Condition: as good as new (ex-display), Year of construction: 2014, Exhibition machine Year of manufacture 2014 Cutting length 2600 mm Cutting width 1270 mm Cutting height at 90° = 130 mm Fodokwha Eepfx Ad Njpp Height adjustment electromotive saw blade diameter 400 mm swivel adjustment 0 - 45° electromotive motor 7 kW speeds 3000/4000/5000 rpm Control: display with separate keyboard swiveling control panel at eye level USB interface 300 programming memory locations electronic position display at the parallel fence cross section frame with parallelogram -manual adjustment -angle adjustment +50 -50° with digital display -length and angle measurement automatic star-delta switch Original price 25950.- Availability: short term Location: Switzerland

Condition: new, Year of construction: 2024, ON STOCK!!! Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Fpjdpfjglfwtsx Ad Njp Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm radius profile scraper

Condition: used, Year of construction: 1986, from model making workshop Machine fully cleaned, lubricated, completely readjusted, partially overhauled Planer knives replaced, Drive belt replaced, Table slats replaced, Test run with planing Knives sharpened and installed Used, excellent condition, low operating hours Manufacturer: Panhans Fpedpfxowhqw Ao Ad Njp Model: 426 Year of manufacture: 1986 Machine no.: 670 GS-tested Upgraded motor: 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Adjustable table feed rollers Segment pressure beam Segment infeed roller Feed speed 7–14 m/min Number of knives: 4 Knife system: strip planer knives Digital display for planing height Electric height adjustment with fine handwheel control Extraction connection D 160 mm Space requirement approx. 1200 mm x 1000 mm x 1400 mm Weight approx. 1150 kg Location: 97447 Gerolzhofen, free loaded on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: new, Year of construction: 2024, The machine is on stock!!! Max. edge thickness 3 mm Min./Max. workpiece thickness 8 – 50 mm Fpsdpfxjhymgde Ad Nop Min. workpiece length approx. 160 mm Feed speed 10 m/min Gluepot heating time approx. 3.5 minutes Power consumption Ø approx. 7.4 kW Electrical connection 400 V/3 phase/50 Hz (Transformed to your voltage) Table height approx. 900 mm Machine dimensions (LxWxH) 4300x1300x1400mm Weight approx. 900 kg Exhaust connection Ø 1 x 140 mm

Condition: good (used), Multivac thermoformer currently setup to produce ‘hotel style’ jam packs, 14g and 20g. 32 portions per cycle. Could also be used to produce ice cubes, sauce packs, ketchup, stock etc. Can also be supplied as a line with M&P 32 head filler and end of line tray wrapper if required (at extra cost). Fpjdpfx Adetp N Ddj Nsp

Condition: used, Year of construction: 2017, total width: 1,900 mm, total height: 2,150 mm, total length: 1,650 mm, Empty weight: 1.499 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No Fsdpfxswl Uffe Ad Nopp - Serial number: AB00002054 - Number of units [pcs]: 1 - └ Unit 1: - - Sanding belt length [mm]: 2150 - - Sanding belt width [mm]: 1150 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Voltage [V]: 400 - Current consumption [A]: 36 - Transport dimensions: 1650mm x 1900mm x 2150mm (l x w x h) - Transport weight [kg]: 1499kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² 18 kW diathermic oil boiler timed pressing digital display Fodpfxot N Auto Ad Nspp Power and Motors Voltage: 400 V Pluging: Three-phased Power: 20 Kw Overall dimensions Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. Fpedpfx Aelht Hzod Nop F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2024, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels Fpodpfsg Tu Rkjx Ad Njp release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: ready for operation (used), Year of construction: 2022, Additional Equipment Control Panel: Smartouch 21" Control System: E-motion // control system with motorized adjustment (accuracy 0.01 mm) Chain Feed System: With automatic lubrication Top Pressure Beam: Motorized height adjustment Pre-milling Unit: 2 x 2.2 kW motors, diamond cutters, up to 3 mm removal Fpjdpjwqtbvsfx Ad Nep Glue Application System: Compatible with EVA and PUR, fast heat-up (8 min) Additional Glue Tank: For fast glue change Edge Pressure Unit: 1 driven + 2 passive rollers, pneumatic control Trimming Unit: 2 motors (0.5 kW), adjustable 0–15° Multi-functional Trimming Unit: 2 motors, 0.75 kW, top and bottom Corner Rounding Unit: Edge thickness 0.4 – 3 mm, panel height 10 – 60 mm, 2 independent motors, 12000 rpm This FORMAT4 Tempora F800 60.12/2 E edgebander was manufactured in 2022. It features a Smartouch 21" control panel, E-motion control system, and a chain feed system with automatic lubrication. The machine includes a pre-milling unit with diamond cutters and a glue application system compatible with EVA and PUR. Consider the opportunity to buy this FORMAT4 Tempora F800 60.12/2 E edgebander. Contact us for more information. Application Types Edge Banding