Bar Machining Center

Rotox SBA 485

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Machine with 3 work stations and 3 transport clamps Electromagnetic linear motor Complete SCHIRMER BAZ 100-G4/SVU centre with stations connected by a "REAL BUFFER" system for time compensation and reinforcement zone. More flexible "Flat-Line" version to accept all types of profiles. For cut profiles up to 3.750 mm (PVC can be cut and machined from 3.750 to 4.450 mm with manual extraction) Control under WINDOWS TWINCAT with BECKHOFF C6140 PC with touch screen. The first station has an automatic loading table for 9 profile bars, a transport clamp with an electromagnetic linear motor, and two work modules, one for machining PVC bars, with 4 CNC axes, rotating with 6 high-frequency motors to work at any angle, and another for cutting with a 500 mm saw blade with variable angles between -45º and + 45º. Label printer and a second extraction clamp with an electromagnetic linear motor to reduce transport times. REAL INTERMEDIATE BUFFER with 27 slots with independent movement to make station times independent, with 8 positions for manual insertion of reinforcement, with indicator lights. Second SBZ-I station with electromagnetic linear motor transport clamp, two work modules, one for screwing, with two screwdrivers (one for frames and one for leaves) with automatic feeder for one type of screw, and the second module has 2 CNC axes and the following drilling motors for PVC + reinforcement: - 1 horizontal drilling unit with a diameter of 6.5 mm (posts and fixing to the work) - 1 horizontal drilling unit with a diameter of 3 mm (locks and square marks) - 1 horizontal drilling unit with a diameter of 3 mm (locks and square marks) Nedpfeuhm N Dex Aa Eewr - 1 vertical drilling unit from below with a diameter of 3 mm (for hinges) - 1 vertical drilling unit from above with a diameter of 3 mm (for hinges) - 1 vertical drilling unit from below, triple head for 10/12/10mm handles Output table with motorized belts. Complete fence with electric closing doors. Possible to see the machine in use until October 11 Exworks price, operational, without warranty Installation, programming and warranty with optional extra cost (only in Spain)

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm Nedevwgnwjpfx Aa Eowr saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use.

Condition: used, functionality: fully functional, Year of construction: 2011, Bystronic / 2300 x 4500 mm R-L Nwjdpfxerr Tmco Aa Eer 2300 x 4500 mm (new press in 2011 of 2700 x 3500 mm) 15-60mm 1000kg Washer GW D 2300 VR 3 B 15 Gas press ZPG 2700 x 3500 mm VR SP 1 AS 15-60 mm 2300 x 4500 mm 1000 kg cy 2011 Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg 1-head sealing machine / 1 / GMR Stock Place: GMR ES

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove Nedewhu Hhspfx Aa Ejwr working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: excellent (used), Year of construction: 2008, Maximum cutting lenght : 3000 mm Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° Nwjdpfx Aaexc Tyye Eer (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying WINDOWS 2000 Software

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system Nedpfehrumajx Aa Eswr - integral pneumatic protection

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 302827, Federhenn rod-profile machining center (drilling and milling) SBZ 100G - TO BE SOLD IN LINE WITH 1 SCHIRMER NC-SAW 1000-G4 YEAR 2014 (COMPLETE LINE) SEE SCHIRMER ADVERTISMENT....!! NC feeder device with gripper max 200 m/min - max profiles 3500 mm.. The gripper can be adjusted pneumatically in 2 axes for adaptation to different profile geometries. Machining station designed as a G-module with 2 servo axes in Y and Z direction. Prepared for accommodating up to 14 processing units for complete processing of PVC, frame, post and frame profiles - outfeeder with table 2500x1500 mm.. PC-control C 6140, display, software SBZ 100G, PLC+NC. Modem remote diagnosis. Loading magazine with 9 places (9 profiles 3500 mm) designed for frame profiles max 127 mm width. Barcode scanner - Horizontal belt conveyor with 9 transport beams that can be adjusted continuously. 18 m/min - 3000 x 2400 mm - units: screw unit, 2 x drilling unit for dowel or post holes, 2 x drilling unit for fixing holes 16,750 rpm, 2 x additional processing (marking the closing part), drilling unit for front door fittings (opens inwards), drilling unit for olive hole drilling (3 sp), milling unit lock case. 2 pcs milling unit for milling and drilling drain slots and ventilation holes. 1 ditto obliquely arranged. 1 swivel device (MD and AD window systems. Milling unit for milling PZ and handle hole pattern Nedpfxewnpa Nj Aa Ejwr

Condition: used, Year of construction: 2001, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, nominal power (apparent): 17 kVA, torque: 82 Nm, controller manufacturer: Heidenhain, controller model: Mill Plus, total height: 2,450 mm, total length: 4,000 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,500 kg, We are offering here a Deckel Maho DMU 50 T with Heidenhain Mill Plus control for sale. Nedpfxew Dfbho Aa Eewr

Condition: like new (used), Year of construction: 2022, Polishing Machine – Ital Plastick PA-2 CNC START • CNC cleaning machine equipped with two reversible knives for white and coated profiles, and a blade for cleaning various profile shapes, with movement on two controlled axes. • Automatic insertion and positioning of the profile thanks to the centering device, which operates through proximity sensors to ensure precision and accuracy. • Maximum workable profile dimensions: up to 190 mm in height and a minimum of 35 mm. • Intuitive 4” Touch Screen panel with the possibility to store up to 99 working programs. Njdpfxewbqkpe Aa Eewr

Condition: used, Year of construction: 2001, functionality: fully functional, Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm Nwjdetr Dukepfx Aa Eer