Swivel spindle milling machine

Robland Ti 120 X3

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Kfsdpfovtyc Hox Aa Eja Horizontal drilling head with 4 spindles on X Horizontal drilling head with 2 spindles on Y Grooving saw D=100 mm Stopping cylinder for workpiece positioning Workpiece clamping system Workpiece length 2500 mm Workpiece thickness 12-60 mm WOODWOP for machine WOODWOP IMPORT DXF BASIC (1 license)

Condition: new, Year of construction: 2025, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm Kfjdjd Hz Niepfx Aa Eea • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Condition: good (used), Year of construction: 2002, Robust T 26 Tilting Spindle Moulder, tiltable from -45 to +45 degrees, with 2-axis Duocontrol positioning control Tilting spindle moulder in excellent configuration A real treat for any Martin enthusiast Pole-switchable drive motor 5/6 kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Max. height adjustment 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilting angle is displayed on the upper display, which is then set at the stop—this allows settings according to drawings to be easily realized Four spindle speeds: 3000, 4500, 6000, and 9000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Axes can be operated manually or automatic positioning of height and fence Fence can be swung away with lift device (for curved work) Table opening via eccentric table rings, electrically adjustable Table extensions on the right and left with extendable workpiece support Support extension up to 700 mm Table length approx. 2400 mm Swing-away fence for tenoning work Original Martin aluminum fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller HolzHer 1117 power feed, with 8 speeds, forward/reverse, new rollers Kfedpfx Aaevv H T Ro Eoa Power feed socket, switchable from the control unit Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some machine parts have been newly repainted Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830 mm (L x W x H). Weight approx. 1800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this provider".

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- Kedpfx Aaju Su Hue Esfa > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Kjdpfx Asu Uvaloa Eofa Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. Ksdpevu Hfqjfx Aa Eefa > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Year of construction: 2023, condition: new, machine/vehicle number: 28086221201 (AABM0013), MASTERWOOD CNC machining center type PROJECT TF 100 2.0 "PARTNERSHIP EDITION" - MAST0337 Technical data: Axes: X axis: Max. Workpiece length: unlimited Min. workpiece length: 250mm Traversing speed: 0-25 m/min. Y-axis: Max. Workpiece width: 1.000mm for all aggregates Min. workpiece width: 85mm Traverse speed: 0-50 m/min. Z-axis: Max. Workpiece thickness: 60mm Min. workpiece thickness: 10mm Traverse speed: 0-20 m/min. Aggregates: 16 drilling head: vertical spindles in X-direction: 5 pcs. vertical spindles in Y-direction: 5 pieces horizontal double drilling spindle in X-direction: 2+2 pieces horizontal double drilling spindle in Y-direction: 1+1 pieces distance drilling spindles: 32mm speed of drilling spindles: 4.000 rpm. motor: 1,7 kW grooving saw: in X-direction Speed of rotation: 4.000 rpm. Max. saw blade diameter: 125mm Motor: 1,7 kW (the grooving saw is integrated in the drill head) Control system: Personal computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB of storage space CD-ROM drive Color monitor Video card integrated 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Suction nozzle: 1 x 150mm Other equipment features: - Air tables at the working area - Roller table at infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (operating instructions, switching and pneumatic diagrams are in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, incl. MASTERWORK software extension Speed: 1.000 to 18.000 rpm. Motor: 4,5 kW with ISO 30 intake Incl. integrated suction control (During drilling only the only the drill head is extracted, for milling only the milling unit is extracted) 6-fold tool changer 3 pieces ISO 30 collet chuck incl. collet chuck Tool equipment, consisting of: HW dowel drill: 5 pieces 5mm - GL 70mm - blind hole drill. 1 piece 5mm - GL 70mm - through hole drill bit 4 pieces 8mm - GL 57,5mm - blind hole drills 2 pieces 10mm - GL 57,5mm - blind hole drills 1 piece 10mm - GL 70mm - blind hole drill bit 1 piece 8mm - GL 70mm - blind hole drill bit 1 piece 15mm - GL 70mm - blind hole drill bit 1 piece 35mm - GL 70mm - blind hole drill bit 1 HW grooving saw blade d=125mm, bore=20mm, width: 4,0mm, Z=35 WSA 1 DIA cutter, right - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 DIA cutter, left - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 VHW-WP finishing cutter, right, D=10mm Foldable roller conveyor in the infeed Foldable roller conveyor in the outfeed Automatic central lubrication Kfodpfeiukvkjx Aa Esa plus options: Complete package for CLAMEX connectors € 3.500,00, complete door package € 3.500,00, software package PaletteCAD start + CAM connection € 3.000,00, freight, installation, instruction € 3.000,00, immediately available from location Seevetal, subject to prior sale.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards Kfodpfxou U Hgie Aa Eoa STANDARD EQUIPMENT HEAD UNIT Independent spindles N.7 vertical N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER PANEL EDGE-READER for perfect panel joints Teleservice Software Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Condition: good (used), Year of construction: 2011, I sell the 3-axis CNC working centre HOMAG WEEKE VENTURE 106M with beam table Kodpjvld Epofx Aa Esfa Year 2011. Configuration: 3-axis main spindle 9 KW Tool magazine 9 positions HSK63 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3050 x 1260mm. 2 working fields, 2 clamping areas Automatic central system of lubrication. Software WoodWop 6.0 with full instructions. Pump BECKER 110m3/hr. Good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 25167180701, total width: 1,000 mm, total height: 60 mm, feed rate Y-axis: 50 m/min, feed rate Z-axis: 20 m/min, workpiece height (max.): 60 mm, rotational speed (min.): 4,000 rpm, power: 4.5 kW (6.12 HP), air demand: 2,000 m³/h, CNC machining center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical specifications: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio. Equipment/features: - Air tables in the working area - Roller support at infeed and outfeed - Panel measuring sensor - Ball screw and linear guides - Rack and pinion drive - Centralized lubrication system - Import of DXF files Milling unit: Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency-controlled): 3.3 kW Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 spindles for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Includes grooving saw blade, 2 diamond milling cutters, 1 WPL finish milling cutter Provision for CLAMEX and door processing package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit designed for door processing, for machine with tool changer, complete including special tool change position in changer, angle gear for holding a lock case milling cutter, macro for lock case milling Automatic, program-controlled central lubrication Kfsdpjxz Hgdjfx Aa Eea Camera for monitoring