Chip extraction fan 15 kW

Reitz MXE 020-018030-00

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Nwsdsra Dddopfx Acvsd Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Design features large feed opening for cardboard option for automatic feeding (e.g., by conveyor) manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales – fewer transports high pressing force suitable for continuous operation Baler from 2016, without tipper

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Nsdpfx Asvvkd Tjcvjwd

Condition: used, mileage: 840,000 km, power: 375 kW (509.86 HP), first registration: 10/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, loading space length: 6,400 mm, Year of construction: 2013, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Special equipment: Front axle load 8.0 t, trailer coupling: central axle trailer G 250, audio system: CD radio comfort (Bluetooth), 220 Ah battery, CB radio, comfort cockpit, air horn, cab: movable cab entry, cab: with low roof - 1560 mm, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, extendable cool box, air intake for cooling units, air filter: construction vehicle filter, programmable special module, Voith retarder, protective plate underneath radiator/engine, seats in cab: driver’s seat comfort suspension seat including horizontal suspension, sun visor, rear axle stabilizer, stone guard mesh, transmission oil cooler. Nwodpfxjyhtkdo Acvsd Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2-line system, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, wide-angle exterior mirror heated, left, outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf/leaf, electric windows, 80 A alternator, body/build: chassis, fuel tank: 300 L, model update from 06/2008, engine 16.0 L – 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, steel rims 9.00x22.5, Telligent gearshift, Telligent brake system with ABS+ASR, front underrun protection, CB radio preparation, phone/fax preparation, immobilizer, heat-insulating glazing (windscreen with heat-reflecting band filter), central locking incl. key, gross vehicle weight 26.0 t.

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm suction nozzle 80 mm Nwsdpjigadlofx Acved pneumatic connection cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year 01/08) - Engine: electric 30kW Nwodsg Tm N Ajpfx Acvjd - 1250l water tank - pressure gauge - pressure regulator - safety valve - Steel frame powder coated - Aluminum covers - Forklift lugs and crane eyes - Dimensions with 1250l water tank: approx. 1.100 x 1.760 x 1.770 - Empty weight: 1.085 kg - Year of construction: 2013 - Operating hours: approx. 1500 h Condition: high pressure pump 06/2022 overhauled. In very good used condition.

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Nwedpfx Aewd Itmocvjd Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Nwjdpfswacqlsx Acvjd Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Operating Units: 9 nr

Condition: used, Year of construction: 2013, Chip conveyor, manufacturer BMF - BÜRENER, with filter system and high-pressure pump. Nwjdpfxjiicnks Acved Chip conveyor dimensions: Neck width: 600 mm, neck height: 200 mm, conveyor length: 3000 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Nsdoia Ta Ujpfx Acvowd Overall dimension(mm): 4530(w)x2350(h)x810(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning in very good condition. Njdpfx Acofg Iphjvewd Filter area 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan drive power 22kW; volume flow: 6700m³/h; pressure: 8000Pa Compressed air valves: ASCO 24Volt Number of filter pockets: 48 Filter medium: no longer available Insulation: Yes with differential pressure measurement Size L/W/H: 3000mm/ 1700mm/ 2100mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Also available stainless steel cooling screw Ø400mm; length 4100mm