Bed milling machine

Reiden BF 4

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Fjdpfjxc Hh Dsx Andspi Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Fpjdogyy I Aspfx Andoi Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Fpsdpfxjy Eu Tvj Andei Software option:Adaptive Control

Condition: refurbished (used), Year of construction: 2024, ### Discover our selection of robust and precise bed milling machines! Are you in search of a reliable bed milling machine that boosts your productivity? Experience unparalleled precision and performance with our new and refurbished bed milling machines. Our machines offer X-travel distances from 1500-5000mm and are available with Heidenhain or Siemens control. With Y and Z travel distances up to 1200mm, you have limitless possibilities. Some refurbished machines are in stock and quickly available! Discover our extensive special accessories, such as universal heads, tool changers, and more, to make your bed milling machine even more versatile. Whether for complex workpieces or challenging tasks, our machines always deliver the best results. Trust in our years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here is a selection of possible machine types, and we are happy to offer additional models or special machines upon request: TECHNICAL MAIN DATA: BFM Series including 15% BAFA subsidy and more! - X-travel: 1500-5000 mm - Y-travel: 1000 mm - Z-travel: 950 (opt. 1500) mm Fpsdpfx Aepwn Hhondoi - Max. table load: 5000 kg - Spindle taper: 50 SK - Spindle speed: 3500 (5000 opt.) rpm - Spindle drive: 15/18.5 (22/26 opt) kW ACCESSORIES: Manual Universal Head, Siemens or Heidenhain Control, Linear scales in X-Y-Z axis, Chip Conveyor Screw execution front/rear, and more. Extensive SPECIAL ACCESSORIES available on request to make the machine even more productive. Currently available refurbished machines with warranty and BAFA subsidy, e.g.: - CORREA CF17D: HEIDENHAIN TNC-426, Travels (X/Y/Z): 2000 / 800 / 800 mm, manual milling head, and more. - CORREA CF25/25: HEIDENHAIN TNC-530, Travels (X/Y/Z): 2500 / 1000 / 1500 mm, automatic universal head UAD (all 0.1º) / 6,000 rpm, and more. - Additional models available on request Contact us now and explore the world of innovative bed milling technology! Our service for you: - Consultation and solution finding on-site - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Fjdpfxjyuzg Hs Andjpi Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Fpjdpsy Tkgbjfx Andsi Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h Fjdjyry Rfopfx Andopi - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2000, x-travel 2500 mm y-travel 800 mm z-travel 750 mm Control HEIDENHAIN TNC430i table dimension - longitudinal 3220 mm table dimension - cross 800 mm tool taper ISO SK40 spindle turning speed range 15000 U/min connected load 25 kVA tool change unit 40 Pos. weight of the machine ca. 20 t dimensions of the machine ca. 6,5 x 3,8 x 3,7 m Fpedpfx Ansxa Hl Dedji This HEDELIUS BC80 is in good condition and can be viewed under power by arrangement with the seller. Description: Designation: Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Year of manufacture: 2000 Travel distance X: 2500 mm Travel distance Y: 800 mm Travel distance Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Tool changer: 40-fold Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Flushing guns - Renishaw TS27R tool measuring system - Renishaw infrared workpiece measuring system - Ethernet connection - Hand-held control module Other: - Ball screw drive in X and Y replaced in 2018 - Complete documentation available Machine weight: Approx. 20 t Space requirement: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 1,000 mm, table length: 4,200 mm, RepairFIT by Dornhöfer The difference. Fpjdpey T Ellsfx Andsi Includes installation & commissioning! KEY TECHNICAL DATA Year of machine construction: 2007 Capacities / Travel: Longitudinal (X): mm 4,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Table size: Length: mm 4,200 Width: mm 1,000 Width of T-slots: H9 Reference slot: H7 Paint finish: RAL 5010 and RAL 9002 Tool interface: ISO 50, DIN 69871 AD Drawbar: DIN 69872 Form A Main drive: Drive power: kW 30 Spindle speed range: Spindle speed: min-1 20-3,000 Feeds: X, Y and Z axes mm/min 2 – 12,000 Max. rapid traverse speed: X, Y and Z axes mm/min 15,000 Weight: kg approx. 22,000 HEIDENHAIN iTNC 530 Automatic MTE milling head, diagonal Coolant system RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, HEIDENHAIN iTNC 530 CNC X-AXIS TRAVEL: 3000 MM Y-AXIS TRAVEL: 1400 MM Z-AXIS TRAVEL (Vertical): 1500 mm SPINDLE SPEED: 5000 RPM SPINDLE NOSE ATTACHMENT: SK 50 Fpjdpfxoxvrrhs Andsi TABLE MEASURES: 3200 X 1100 MM TABLE LOAD CAPACITY: 10,000 KG 24-Place Tool Changer No. 02 Chip Conveyors Automatic Indexed Head a axis 2,5 ° b axis 3 ° YOM 2008