Conveyor roller

RBO

Condition: used, machine/vehicle number: 006585, Max. panel width: 2700 mm Max. panel length: 1200 mm Fgodeuxg Udepfx Ab Asg Max. panel stack height from the ground: 1300 mm Lifting capacity: 50 Kg Movement system: suction cups.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance Fgodpjfbt Siofx Ab Aog • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Condition: used, machine/vehicle number: 005693, Max. panel width: 1200 mm Fsdpfxjyhbfpe Ab Aegg Max. panel length: 3200 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Work capacity: 16 Cycles/min Movement system: suction cups.

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Fsdpfx Abjwuz Rto Aogg Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: new, Year of construction: 2026, Genie GS1932m Micro E-Drive scissor lift, new, used, demonstration machines available Fgodjricraspfx Ab Aog

Condition: used, machine/vehicle number: 007811, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 5: Panel Turning Device BIESSE - RBO-STREAM SB Fgodpjv Dyxcjfx Ab Ajg Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

Condition: used, machine/vehicle number: 005685, Max. panel width: 1200 mm Max. panel length: 3200 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Movement system: suction cups. Fgjdpfx Absyg Ec Ne Aeg

Year of construction: 2008, condition: used, filling amount 180 l injection pressure 1,3 bar 700 l/min Fodpfxowgi Epo Ab Aogg diameter 800 mm voltage 400 V frequency 50 Hz dimensions ca. 1200x1300x1100 mm weight of the machine ca. 300 kg

Condition: used, machine/vehicle number: 005687, Max. panel width: 3200 mm Max. panel length: 1200 mm 180 degree panel tilt system: yes Fgsdpoktdtpjfx Ab Asg

Condition: used, machine/vehicle number: 008411, Max. panel width: 1200 mm Max. panel length: 2700 mm Rotation system: double cone Fgsdpfx Aboyngy Eo Asg Rotation direction: from long to transverse

Year of construction: 2024, condition: as good as new (ex-display), Metalclean - Metalclean-P-120 spray cleaning system in stainless steel 1-tank spray cleaning system with a rotating basket. Equipped with a pneumatic oil separator. Stainless steel pump with a spray pressure of 5 bar. Usable dimensions = D = 1,200 mm H = 700 mm Load capacity / batch = 300 kg Tank volume = 270 liters Operating voltage = 3 x 400 V/N/PE 50 Hz Fume extraction Fsdpoir Anqefx Ab Asgg

Condition: used, machine/vehicle number: 007684, Max. panel width: 1200 mm Fgjdpey Nkttofx Ab Aeg Max. panel length: 3000 mm Max. panel stack height from the ground: 1800 mm Movement system: suction cups.

Condition: used, machine/vehicle number: 006107, Position 1: Panel Feeding and Loading RBO-WINNER C Position 2: Panel Turning Device RBO-WINNER C Position 3: Panel Turning Device RBO-WINNER C Position 4: Panel Stacking and Offloading RBO-WINNER C Fsdpfowuch Tjx Ab Aogg

Condition: new, table length 1300 mm table width 800 mm stroke height 1015 mm weight max. in kg 3000 kg 220 mm Fedpsvn Uzmofx Ab Ajgg connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: excellent (used), EDGE BANDING and CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Flexa 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Flexa 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Flexa 912: mm 100 /1350 (o 650+650) 238000A) “DOUCET” motorised roller conveyor for feeding panels to the “HOMAG” edge-bander 238000B) “HOMAG” edge-banding machine, Model KL 73/A3/S2 238000C) “DOUCET” motorised roller conveyor for feeding edged panels to “MORBIDELLI” Flexa 912 238000D) “MAHROS” 90° transfer unit (infeeding “MORBIDELLI” Flexa 912) 238000E) "MORBIDELLI" Gantry (Portal) CNC (Drilling and Routering) Mod. Flexa 912 - N. 2 upper working head, EACH consisting of: - 1 type T35M drilling head with 35 vertical spindles (21 on the Y-axis + 14 on the X-axis) - 1 (movable) drilling head with 14 vertical spindles (on the Y-axis) for fittings - 2 heads with 2 horizontal spindles each (4 total) on the Y-axis - 1 HKS 63 vertical electric spindle (6.6 kW) - N.2 horizontal units (1 R + 1 L) EACH with 21 drilling spindle (21 + 21 = total 42) 238000F) “MAHROS” 90° transfer unit (outfeeding “MORBIDELLI” Flexa 912) Fgsdpozza Rvofx Ab Ajg 238000G) "RBO (BIESSE)" Stacker (Bridge Frame), double station Mod. Selecta SC