Raimann KR 310 E 340/120 Multiblade

Raimann KR 310 E

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Cedow Sy T Hepfx Agzogp Storage location: Nattheim

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Cgsdpfx Aged H Sc Ejzsp Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal Cgjdpfowclkysx Agzep - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: excellent (used), Technical data: Max planing width: 400 mm Max planing height: 240 mm Knife shaft diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Csdpfsv Rv Dbsx Agzjgp Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. Codpfsh Ayyqjx Agzsgp The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Codpfx Agof Sqckozjgp Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Cgsdpfx Aobxu Dhogzep Knife for Weima, Large ..... For almost all common chippers / shredders From stock Bitburg Subject to prior sale

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 Codeh Dwl Djpfx Agzogp - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m Cedsftdv Ujpfx Agzegp with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: used, Year of construction: 2002, operating hours: 3,900 h, FOR SALE A BEVELING MACHINE IN VERY GOOD CONDITION FROM NEW IN A SMALL GLASS FACTORY. SEE IN WROCŁAW Cgodpswb U Rgefx Agzsp