Vertical machining centre

Quaser MV 154 P

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels Fpsdoxlf D Nspfx Andsi X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, Fpjdpfjyia T Sox Andei B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Fsdpfjxc Hh Dsx Andspi Tool blocking power 1968 daN Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Fedpfeh Hvk Aex Andopi Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fedpfx Aoxzk Niendjpi Photo outside of the machine of an already delivered one in similar scope. Other fotos from the origin machine. -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm Fpedpfexppnmox Andsi MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: +20 -50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW HIGH PRESSURE COOLANT: 25 Bar CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Fpjdpjxdmgvofx Andei Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Fodeucfwpopfx Andopi

Year of construction: 2002, condition: used, diameter 180 mm workpiece length 0 mm work piece width 1350 mm total power requirement 65 kW Fedpfx Anst Hw Shsdjpi weight of the machine ca. 7.500 kg dimensions of the machine ca. m

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Misc.accessories Fjdpfsrivlujx Andopi MARCELS MASCHINEN AG