Cooling tank

Primac CV.2C. 125/6

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request. Gedpsbqt Arofx Afnotu

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Gtedpovgrh Usfx Afnou Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Gtjdeiyyf Iepfx Afnsu Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. Gsdpfx Asghgd Isfnotu The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Gtodpfx Aoh Nmt Dsfneu Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Year of construction: 2010, condition: like new (used), BATTENFELD PE PIPE HEAD RK 315 helix, screen basket with tool 315 PE Little used smokes Gjdohy Aq Ispfx Afnetu Condition: As good as new The pipe head is my property Sachal extrusion machines Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Chamber: 1st Pipe Diameter: Max 125mm Length: 6 meters Godpjiidm Tefx Afnjtu Feed: electrically back and forth Year of construction: 2000 Material: stainless steel

Condition: like new (used), Stainless steel pallet lifter, Fork dimensions: (2x) 1150 mm x 160 mm Total dimensions: 1600 mm x 530 mm x 1220 mm Gjdpfxohlp Nfs Afnotu

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 Gtodpfx Ajqpft Iefneu - Screw Ø: 65 mm - Working hours: 102.364

Year of construction: 2004, condition: good (used), 1x Rapid GK2218 ( 1987) 1x Rapid 1521A ( 1996) Godpfsitvbpjx Afnetu 1x Rapid GK205A ( 1989 ) 2x Rapid 1521A ( 2004)