Spare parts for POREBA lathe TPK, TR135

POREBA TR135, TPK-90

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m Lhjdpfx Ast Hw T Sjpmji

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Lhodotu Il Tspfx Apmsi Honing device Wet sanding device

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Send us your inquiry today! Ledpfx Ajg Rn Avepmjhi

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler ----- - frame-mounted - - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Lodpey H Iruefx Apmjhi Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Permissible operating pressure: 16 bar Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: used, Modular milling cutter Module 8 20 degrees Length 1800 mm Lhsdpfxedklt Ne Apmsi Diameter 120 mm Inner diameter 40 mm

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 Ledpfx Apet Drkyemjhi -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. Ljdpfsh Ek Dajx Apmjhi According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr Lsdpfxehqqnzj Apmshi MADE IN AUSTRIA

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Lodpfodzp Tcsx Apmohi Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: excellent (used), Year of construction: 1986, RAFAMET type KCF 400 Lhodjytq T Hjpfx Apmoi Morę information on request