Universal lathe machine

Poreba TR 135B x 3000

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, turning diameter: 1,350 mm, turning length: 3,000 mm, Status: during general overhaul. The PORĘBA TR series lathe is a universal machine tool intended for both roughing and finishing operations. It is particularly suitable for machining shafts as well as heavy, large-size workpieces. The offered machine is currently undergoing a general overhaul – the last photo presents its current stage of refurbishment. The remaining photographs show TR series lathes after general overhauls performed by our company and delivered to end users. They serve as a reference for the final quality standard and workmanship. Scope of the general overhaul: - Complete dismantling of the lathe Gedpfx Afsyh H Iyenjtu - Regeneration and replacement of worn components - Calibration of trapezoidal lead screws and manufacturing of new bronze nuts - Replacement of bearings and sliding bushings, including new spindle bearings - Grinding of bed, carriage and top slide guideways, followed by scraping of mating surfaces (with application of anti-friction materials) - Regeneration of the tailstock quill - Regeneration of the tool post - Overhaul and modernization of lubrication and coolant systems - Electrical scope: manufacturing of a new electrical cabinet, complete new machine wiring, and replacement of all electrical components with new ones - Inspection of electric motors together with replacement of bearings - New painting - After completion of the overhaul: trial assembly, preliminary acceptance at our workshop, positioning on the foundation, levelling and final acceptance - Adaptation of the lathe to minimum safety requirements in accordance with applicable EU Directives

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Gsdpfxjuqackj Afnjtu

Condition: new, 1 brand new universal milling head, HURON system Make: EMENA Model: V 0, ISO 40, standard version Technical specifications: - Taper: ISO 40 - Outreach: 270 mm - Rated drive power: 5 HP - Max. speed: 1800 rpm - Weight: approx. 32 kg Design: Standard version, with adapter plate / mounting flange, head side finished, machine side unfinished, for subsequent installation on conventional, NC, or CNC milling machines or any type of boring mill, HURON system Option: Gtjdebpmv Sjpfx Afneu - Adapter plate, head side finished, machine side with machining allowance - Raised version Delivery time: approx. 3 months after receipt of order and payment Images are similar! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, Milling machine retrofitted in 2024 Gtodpoul Txzofx Afnju CNC TNC 530 HEIDENHAIN Distance between columns 1250 mm HSK 63 ELECTROMANDRINO spindle 12.000 rpm INTEGRAL fairing

Condition: new, original Siegmund welding table perforated plate octagonal 2D or 3D 1200 x 200 with 28 mm hole 514 kg, diameter 1300 mm plasma nitrided original price 8900.-€ in combination with positioner half price sold only in combination with positioner Hole holder 8 hole 500 x 500 diameter 18mm (see picture) Gedpfx Aot Sk Ndsfnetu

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm Gtedpfx Aom Rlb Nefnju tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Gjdpefw Ah Rjfx Afnotu Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization Gtsdpfx Ajv Dhw Tsfneu _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: used, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, X-AXIS STROKE 6000 MM Y-AXIS STROKE 1800 MM AXIS STROKE 1000 MM 7300 X 1090 X H 900 MM BENCH ISO 50 SPINDLE NOSE CONNECTION SPINDLE SPEED 0 - 4500 RPM 2.5 ° X 2.5 ° AUTOMATIC INDEX HEAD CNC SELCA 3045 PD Gtodpfev H D Exox Afnju EXTERNAL AND INTERNAL HIGH PRESSURE COOLING TOOL CHANGE 60 PLACES NR 01 CNC-MANAGED DIVIDING DEVICE

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h Gtodpfew Au H Rjx Afnou X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.