Spacer rings for edger

PAUL KME 2 oder BM

Condition: like new (used), ffor PAUL KME 2 or BM edger and multirip saw, overall length 420 mm, 160 mm or 105 mm, clamping length 375 mm, 110 mm or 55 mm, bore Ø 60 mm, outer Ø 75 mm, flange Ø 120 mm, 2 external wedges, saw bushes with left-hand thread or right-hand thread available Dwjdpfepky Aajx Af Ied

Condition: used, Log table with elevator and log scanner Rema Control Dodpfx Aou Smq Ssf Iowd - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Rema system with measuring frame type 9001 Dedpfxor Hbcfj Af Iowd Hydraulic log kickers

Year of construction: 2024, condition: new, - With 5 spindels - Grooved table for short pieces Outstanding characteristics: Sealed safety hood to reduce noise levels and prevent chips from splash Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min Each spindle driven by independence motor with powerful cutting To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly Centralized spindle adjustment on the front panel is easy to work Hard Chromed electro plated treatment has been adopted for the durability of the work table surface Short feeding device is equiped for smooth feed avaliably Bottom driving roller to improve feeding performance Pneumatic pressure feed wheel can be seperately adjusted, make for feed pieces with various thickness Dwodpegp Dcqefx Af Iod Manual oil pump to lubricate the working tables and slides, to be easy to centralized control Pre- trimming cutter on the first bottom shaft and teethed work table was designed to reduce the noise level effectively and cut out the precise linearity Removable work table of vertical spindle was designed of dust proof of efectively protect the screw bar from pollution Special hardness treatment of HRC 58 has been adopted on the work table beside of the first bottom spindle for increasing the durability and natural life of the work table surface Adopting electric component from international class with steady quality TECHNICAL SPECIFICATIONS: - Working width (min): 20 mm - Working width (max): 240 mm - Working thickness (min): 8 mm - Working thickness (max): 180 mm - Number of spindels: 5 kos - spindle speed: 6000 r/min - Diameter of Spindle: 40 mm INSTALLED CUTTER-BLOCKS (from first to last): - first bottom spindle: diameter 108- 145 mm - right spindle: diameter 108- 200 mm - left spindle: diameter 108 -200 mm - first top spindle: diameter 108- 200 mm - second bottom spindle: diameter 108- 200 mm MOTOR POWER: - first bottom spindle 5,5 KW (7,5 HP) - right spindle 5,5 KW (7,5 HP) - left spindle 7,5 KW (10 HP) - first top spindle 7,5 KW (10 HP) - second bottom spindle 7,5 KW (10 HP)

Condition: used, Year of construction: 1986, from model making workshop Machine fully cleaned, lubricated, completely readjusted, partially overhauled Planer knives replaced, Drive belt replaced, Table slats replaced, Test run with planing Knives sharpened and installed Used, excellent condition, low operating hours Manufacturer: Panhans Model: 426 Year of manufacture: 1986 Machine no.: 670 GS-tested Upgraded motor: 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Adjustable table feed rollers Segment pressure beam Segment infeed roller Feed speed 7–14 m/min Number of knives: 4 Knife system: strip planer knives Digital display for planing height Dodpfxswhqw Aj Af Ijwd Electric height adjustment with fine handwheel control Extraction connection D 160 mm Space requirement approx. 1200 mm x 1000 mm x 1400 mm Weight approx. 1150 kg Location: 97447 Gerolzhofen, free loaded on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 1989, machine/vehicle number: 1025, arm reach: 13,300 mm, load capacity: 2,300 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 1989 (factory overhaul 2007) Machine number: 1025 Track, m: 3.0 Crane type: OBX IV (year of manufacture 2007) Reach: 13.3 m Dsdpfjv Ddtkox Af Iowd Load capacity without grab: 2,300 kg / 13.0 m Grapple: included Crane arrangement: behind the cabin Cab side: left Saw: 1.3 m Alpha Measurement: dividing aid with 2-level measurement Year of manufacture 2007 !! Sold on behalf of the customer!! Available from April 2025

Condition: good (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: T4907, Cutting band saw Stenner VHM 36, 3" Year of manufacture 1976 S/N T4907 roller diameter 915mm max working width to fence ( right ) 230mm max fence width to left pressure roller : 230mm table height 812mm feed 10-45m/min fence tiltable 0-45 degrees Dwedpfx Aouy U Eysf Ijd max height 406mm Saw blades up to 78mm Motor 15kw ( 18 HP ) three-phase motor Weight approx. 1.85 tons Technical data subject to change

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW Djdpfx Ajqy E Rlef Ijwd two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Year of construction: 1998, condition: excellent (used), functionality: fully functional, machine/vehicle number: 389101016885, Bulgarian forklift from Balkancar .Capacity 3.5 tons disel drive ..Year of production 1989 ..Unladen weight 4800 kg. Dwjdpotz Td Ajfx Af Isd Lifting height 3300 mm... Torque 79/27,5 kN. Serviced .Very good condition .Trolley operational ready to use .Net price vat invoice. Cart with access to spare parts .

Condition: used, Year of construction: 1998, Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one setup. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Saw positioning device, Automatic central lubrication, Wet grinding device, Extraction, Halogen lamp, 1 saw blade mounting bolt including magnet holder Oil collecting tray Circular saw blade diameter: 80 -840mm Circular Saw Bore Diameter: with robot from 10 -180 mm Circular saw bore diameter : from 10 mm Sawblade thickness : up to 14 mm Tooth pitch: 6 - 120mm rake angle: -35° to +40° Dodpfxsr U Stxj Af Ijwd Bevel grinding on the tooth back: up to 45 ° clearance angle: 5° - 45° Bevel grinding on the negative tooth face: up to 30° Working speed for breast and back grinding: up to 12 teeth/min., Bevel cut on the back of the tooth: up to 45 ° Bevel cut on the negative tooth face: up to 30° Working speed for front and back grinding: up to 12 teeth/min., Grinding path and grinding speed per machining surface on the tooth: Stepless adjustable Dimensions L x W x H =: 2295 x 1743 x 2050 mm Weight : 2000 kg Connected load approx.: 4.4 kW (400 V / 50 Hz) colour: telegrey RAL 7045/7047