Machining Centres - Horizontal

PAMA SPEEDCENTER

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm Psdpfjx Avqbjx Ahlept max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area Pjdpfxoygtnas Ahlopt

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures. Ppjdpoxf Iamefx Ahlst

Condition: used, Year of construction: 2006, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B-axis (head) -10 - +180 x 0,001 ° C-axis (table) 360 x 0,001 ° feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg rotary table speeds infinitely variable 10 - 500 U/min Podoyui Ncspfx Ahlspt total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Spindle new 10/2025 Turning-table overhaul 2022

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Ppjdpfsxzk Nijx Ahlot Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: ready for operation (used), Year of construction: 2023, operating hours: 8,900 h, functionality: fully functional, Heller HF5500 including Fastems FPT 1000 Heller HF5000 5-axis machining center Control: Siemens Sinumerik SL Spindle: HSK100 Tool magazine: 100 tools Fastems FPT1000 18 pallet stations Planning software (unmanned shift) Ppedpfx Aow I Tupohlet

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER AUTOFEED 8 PALLETS 140 TOOL ISO50 Podpfx As Dvlxehlspt

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 Ppjdpfsyw Tddex Ahlst WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Condition: good (used), Year of construction: 2005, travel distance X-axis: 12,000 mm, travel distance Y-axis: 3,500 mm, Technical Specification - X-axis (longitudinal travel - table): 12,000 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm Ppedpfsyuxd Nex Ahlst - Y-axis (vertical travel / column): 3,500 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm - Rated torque (motor): 42 Nm Z - W-axis (spindle head): - Boring spindle diameter: 150 mm - Axial stroke of boring spindle (Z): 1,200 mm - Rapid traverse Z-axis: 20,000 mm/min - Internal taper of boring spindle: DIN 69871, ISO 50 - Spindle diameter: 254 mm - Spindle front bearing inner diameter: 200 mm - RAM dimensions: 400 x 400 mm - Axial stroke of boring spindle (W): 1,000 mm - Rapid traverse W-axis: 15,000 mm/min - Total axial stroke (Z+W): 2,200 mm - Rated torque spindle motor W and Z-axis: 42 Nm - Number of spindle gearbox speeds: 2 - Spindle speed range: 6 – 3,500 rpm - Spindle motor power: 60 kW Clamping plate sections: - Dimensions: 2 units @ 1,500 x 4,500 mm, 1 unit 2,000 x 4,500 mm - Load capacity: 15,000 kg/m² Workpiece table (axes V1 - B1 / V2 - B2): - Table dimensions: 2,000 x 3,000 mm - T-slot size: 28 mm - T-slot pitch: 180 mm - Table top height from floor: 650 mm - Load capacity: 40 t Tool rack magazine ATC 13-150 R 147 - Maximum magazine capacity: 147 tools - Maximum tool weight: 35 kg - Maximum tool length: 700 mm - Tool taper: DIN 69871 - Tool change time: 28 sec Milling head with indexed vertical axes, model TTL 2 18 360 - Tool holder: ISO 50, DIN 69871 EQUIPMENT: - CNC control: Heidenhain iTNC 530 - Electronic handwheel - Chip conveyor (manufactured: 2023) - CE marking - Documentation

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Podpfx Ahswzyp Ujlspt Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m