CNC turning and milling center
Okuma Mac Turn 550 W

Name: Okuma Mac Turn 550 W
Brand: Okuma
Availability: InStock

Year of construction

2005

Condition

Used

Location

Germany

CNC turning and milling center Okuma Mac Turn 550 W

Show map

Machine data

Machine type:: CNC turning and milling center

Manufacturer:: Okuma

Model:: Mac Turn 550 W

Year of construction:: 2005

Condition:: good (used)

Price & Location

Location:: , Germany

Call

Details about the offer

Listing ID:: A21491247

Update:: 12.03.2026

Description

The machine has been maintained annually under a service contract with Okuma.

Okuma Mac Turn 550 W
Year of manufacture: 2005
Gedsyt Nvtepfx Abwsbi
Control: OSP-E 100 L
Max. turning diameter: 720 mm
Distance between tailstock tip and spindle nose: 2,505 mm
Y axis travel: 250 mm
Main spindle speed: up to 3,500 rpm
Spindle motor power: 30 kW
Lower turret with 12 stations
Milling spindle with infinitely variable B axis
80-position tool magazine
HSK 100 tool holder
3-jaw chuck, diameter: 315 mm

In 2023, the cable carrier for the W axis including all hoses was replaced.
In October 2024, the linear guides for X/Y/Z axes were renewed.
All work was carried out by Okuma.
The machine was cleaned.
Covers and sheet metal parts were dismantled.
8th axis dismantled.
Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine.
All linear guides removed.
Mating surfaces of the ZA axis cleaned.
New ZA axis linear guide incl. carriages installed and secured at specified torque.
New ZA axis ballscrew incl. bearings installed.
Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected.
ATC including auxiliary components reinstalled and connected.
New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed.
Travelling column installed and lubrication lines connected. XA base plate installed and aligned.
8th axis installed and aligned.
H1 turret mounted
- Install drive motor for 8th axis
- Assemble 8th axis and new H1, set geometry
- Function test for 8th axis and H1
- Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis
- Run-in program for H1 and create defect report for OEG
- Install left door, adjust various covers
- Install chuck
- Adjust zero points
- Check tool change

The listing was translated automatically. Translation errors are possible.

Seller

Last online: Yesterday

Registered since: 2002

67 listings online

Call

Send inquiry

Telephone & Fax

+49 6486 ... show

Fax:

These listings may also fit your interest.

Listing

CNC Turning & milling machine Nakamura-Tome WT250

Schweiz

1,381 km

CNC Turning & milling machine
Nakamura-TomeWT250

Call

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Godpfx Aox A Eupebwsbi Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

See details

Listing

Universal machining center 5 axes DMG DMC 125 U

Blintendorf

1,769 km

Universal machining center 5 axes
DMGDMC 125 U

Call

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS Travel X / Y / Z: 1,250 / 880 / 800 mm Control: Heidenhain Spindle speed: 10,000 rpm B-axis: automatic Gbedoxdncljpfx Abwji Number of tool changer stations: 60 Tool holder: SK-50 Number of pallets: 2 pcs Pallet dimensions: 1,000 x 800 mm MACHINE DETAILS Operating time: 59,112 h Spindle hours: 21,619 h Machine transport dimensions: 5.5 x 3.0 x 3.1 m; 14.3 t EQUIPMENT - electronic handwheel - MillPlus 3D contouring control - Central spindle air blast - Measuring probe - Rinse gun - Documentation - Chip conveyor (hinged belt) - Coolant system - Oil mist extraction

See details

Listing

CNC turning and milling center Mori Seiki SL-150 SMC

Alblasserdam

889 km

CNC turning and milling center
Mori SeikiSL-150 SMC

Call

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Gbodpfx Ajx Hp Hgobwei Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Chip Conveyor Coolant System Machine Data Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

See details

Listing

Glaubitz

1,481 km

CNC Lathe
Mori SeikiSL-253

Call

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 389 mm, turning length: 485 mm, turning diameter: 678 mm, spindle bore: 86 mm, spindle speed (max.): 3,500 rpm, feed length X-axis: 236 mm, feed length Z-axis: 495 mm, chuck outer diameter: 254 mm, controller model: Mori Seiki MSG-501, Twin Spindle Lathe with Mori Seiki MSG-501 Control, Gbsdpfsyguzzex Abwsi Live Tooling. 12 Station ATC, 3 Jaw Chuck 250mm, CHip Conveyor, 170mm 3 Jaw Chuck

See details

Listing

CNC turning and milling center Nakamura-Tome WT150

Jelah

2,130 km

CNC turning and milling center
Nakamura-TomeWT150

Call

Condition: used, Year of construction: 2007, functionality: fully functional, CNC Control: Fanuc 18i-TB Travel X-axis (mm): 157.5 Travel Y-axis (mm): 35 Travel Z-axis (mm): 464.8 C-axis: 360º (0.001º increments) Turning length (mm): 399 Max. turning diameter (mm): ø190 Distance between spindle noses (mm): 750 Spindle bore (mm): 65 Upper turret: Number of tool stations: 12 Max. speed of driven tools (rpm): 6,000 Driven tool power (kW): 5.5 / 3.7 Lower turret: Number of tool stations: 12 Max. speed of driven tools (rpm): 6,000 Driven tool power (kW): 5.5 / 3.7 Main spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 15 / 11 Sub spindle: Max. spindle speed (rpm): 4,500 Spindle drive power (kW): 11 / 7.5 Equipment: Parts catcher Bar feeder: LNS HYDROBAR SPRINT Rated power (kVA): 67.2 Basic machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000 Gbjdpfox Rvivsx Abwsi

See details

Listing

CNC turning and milling center Mori Seiki NL2000Y NL200Y/500

Great Britain

135 km

CNC turning and milling center
Mori Seiki NL2000YNL200Y/500

Call

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: NL201IJ3007, MORI SEIKI NL2000/500 CNC TURNING CENTRE Godpfxewxw Ivj Abwjbi YEAR 2005, 2006,2009 CONTROL MSX-850 CONTROL COLLECT CHUCK DRIVEN TOOLING 4 AXIS SWARF TRAY 16 TOOL TURRET TAILSTOCK PARTS CATCHER TOOL SETTING PROBING SPINDLE SPEED MAX 6000 RPM MAX TURNING DIA 356 MM X TRAVEL 260 MM Y TRAVEL 100 (+ - 50) Z TRAVEL 590 MM C AXIS MOVEMENT 0.001 BAR CAPACITY 65 MM MACHINE COMES WITH PLASTIC EXTRACTION TANK MACHINE MAINLY USED ON PLASTIC , CONDITION IS EXCELLENT THANKS FOR LOOKING MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

See details

Listing

CNC lathe Mori Seiki SL403B ∅620 diameter

Jasło

2,081 km

CNC lathe
Mori SeikiSL403B ∅620 diameter

Call

Condition: excellent (used), Year of construction: 2011, CNC lathe Mori Seiki SL403B/800, year of manufacture 2011, Japan 2 axes - X axis 345 mm Gbedjyffctepfx Abwei - Z axis 995 mm max spindle speed 2000 rpm Fanuc mapps MSX 500-IV control 18" Kitagawa B-18 (450 mm) chuck turning diameter 620 mm max turning length 958 mm 12-position turret tailstock chip conveyor Renishaw probing system.

See details

Listing

Jelah

2,130 km

CNC turning and milling center
NAKAMURA - TOMEWT 150

Call

Condition: used, Year of construction: 2005, functionality: fully functional, CNC Control: Fanuc 18i-TB Travel X-axis (mm): 157.5 Travel Y-axis (mm): 35 Travel Z-axis (mm): 464.8 C-axis: 360º (0.001º increment) Turning length (mm): 399 Max. turning diameter (mm): ø 190 Distance between spindle noses (mm): 750 Bar working capacity (mm): 52 Gjdex Rvipspfx Abwobi Upper turret Number of tool stations: 12 Max. speed driven tools (rpm): 6,000 Driven tools power (kW): 5.5 / 3.7 Lower turret Number of tool stations: 12 Max. speed driven tools (rpm): 6,000 Driven tools power (kW): 5.5 / 3.7 Main spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 15 / 11 Sub spindle Max. spindle speed (rpm): 4,500 Spindle drive power (kW): 11 / 7.5 Equipment Parts catcher Bar feeder LNS HYDROBAR SPRINT Nominal kVA: 67.2 Base machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000

See details

Listing

Mielec

2,054 km

CNC lathe
OkumaLU3000 EX

Call

Listing

CNC turning and milling center MORI SEIKI NT 4200/1000S

Trittau

1,230 km

CNC turning and milling center
MORI SEIKINT 4200/1000S

Call

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Gbedpfx Ajxxraqsbwsi Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Bed length: 1,000 mm Spindle speed: 5,000 rpm Spindle bore: 73 mm Number of tool stations: 100 Milling spindle speed: 12,000 rpm Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information subject to change and error. Prior sale reserved!

See details

Advertise here