CNC Turning- and Milling Center

Niles-Simmons N30/2500 MC

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Lhjdpfx Aajwwarueljd Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: C3300, grinding length: 4,500 mm, grinding width: 300 mm, table length: 4,500 mm, table width: 300 mm, space requirement height: 2,500 mm, space requirement length: 13,700 mm, space requirement width: 2,500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Sanding length: 4500mm Sanding width: 300mm Workpiece height: 250mm Swivel range table or sanding arm: +-90 degrees Segment head diameter: 560mm Spindle diameter in front bearing: 120mm Swivel range: 2° Max. Torque: 719,5Nm Motor: B280, 55kW Lhodpfx Aastqtn Delod Grinding spindle speed range: 0-730 rpm Control system: BBC Baumüller drives Marposs measuring system Hydraul. Clamping Sanding mist extraction system: Hydrocyclone cleaning system Additional sanding unit ZU Feed rate: 2000-35000mm/min Space requirement approx. 13.7x2.5x2.5m

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS Travel X / Y / Z: 1,250 / 880 / 800 mm Control: Heidenhain Spindle speed: 10,000 rpm B-axis: automatic Number of tool changer stations: 60 Tool holder: SK-50 Number of pallets: 2 pcs Pallet dimensions: 1,000 x 800 mm MACHINE DETAILS Operating time: 59,112 h Spindle hours: 21,619 h Machine transport dimensions: 5.5 x 3.0 x 3.1 m; 14.3 t EQUIPMENT - electronic handwheel Lhedpfxjxdncls Aalod - MillPlus 3D contouring control - Central spindle air blast - Measuring probe - Rinse gun - Documentation - Chip conveyor (hinged belt) - Coolant system - Oil mist extraction

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue Lhsdpfx Aovr Eh Ejaljd • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1988, tail stock ja ja Lhodpfou Su I Eex Aalsd condition nicht geprüft weight of the machine ca. 3,8 t

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Lhedpfx Aaji Dagkoljd Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Lhedpfsuxdhuox Aaljd

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Lhedpfxog A Hcuo Aaljd

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Lhjdpfof Rt Irex Aalsd

Condition: reconditioned (used), functionality: fully functional, center height: 100 mm, workpiece weight (max.): 20 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, distance between centers: 400 mm, year of last overhaul: 2026, CHARACTERISTICS : Centre distance: 400 mm Center height: 100 mm Working feed Z axis: 100 - 3500 mm/min Orientation of table: 0 - 30 ° Grinding spindle motor power: 3 kW Max. diameter grinding wheel: 350 mm Max. grinding wheel width: 30 mm Grinding wheel bore: 127 mm Workpiece spindle nose: W20 Workpiece spindle min. speed: 30 rpm Workpiece spindle max. speed: 1200 rpm Max part weight between centres: 20 Kg Workpiece swiveling range: 0 ° / +90 ° Workpiece spindle power: 0.5 kW Type of attachment tailstock: MT2 Tailstock quill stroke: 20 mm Machine dimensions: 2350 x 1480 mm Ljdpfjycim Djx Aalshd Weight: 1600 Kg