Packing machine

Nordson Problue 10 Hot Melt Pump Problue 10

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. Gsdpfsh Eibasx Aaxobl The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Hohner universal stitching head 52/8 - 6er ring eyelet - for round wire No. 24 - 26 - with various accessories acc. pictures condition as shown in the photo Gjdpfx Aasfc Rx Toxjbl

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Gbedjnxkm Espfx Aaxel Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) Gbjdju Nu Hiepfx Aaxsl -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: good (used), Year of construction: 2005, UV Flexographic Printing Press Year of Manufacture: 2005 Servo-driven UV flexographic printing press Gbjdpfx Asyf Iauoaxel Working Width: 330 mm / 13" Configuration and Equipment → Unwind → Web guiding system → Splice table → Corona treater → Web cleaner → Delamination / relamination unit with web turn bars → 6 flexographic printing units → 6 GEW UV dryers → Automatic register control → Chill rollers → Rotary die-cutting station → Waste matrix rewind → BST web inspection camera → Product rewind

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Gsdpfx Aox Ngfloaxebl Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors • 1 × line sensor Inspection & Register Control Video inspection system: E+L Elscan Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: FT2K-3403, TECO packaging machine FT2K-V13 - Detailed description The TECO machine model FT2K-V13 is an advanced packaging machine specially designed as a case erector. Here is the detailed information about this machine: - Main category: Packaging machine - Subcategory: Case erector - Machine name: Case erector Technical data: - Model: FT2K-V13 - Year of construction: 2015 - Operating hours: 23,000 hours - Vehicle number: FT2K-3403 - Condition: Good, but used. The machine is fully functional and in perfect condition. - Warranty: No warranty period available. - Type of input power: Alternating current (AC) - Total weight: 800 kg - Compressed air connection: 6-9 bar - Overhaul: There has been no overhaul to date. Gbodpet Txudsfx Aaxol Dimensions: - Overall width: [Please insert the exact width] - Overall length: [Please insert the exact length] - Overall height: [Please insert the exact height] Inspection possibility: The machine can be inspected on site to check its condition and functionality. Special features: - The machine offers high efficiency and reliability for erecting cartons. - Thanks to its robust construction and high-quality materials, the machine is durable and suitable for long-term use. If further technical details or specific requirements are needed, these can be provided on request. Contact information: For further information or to arrange a viewing appointment. Please feel free to send us a message.

Condition: good (used), Year of construction: 2007, Gallus EM 510 • Year of manufacture: 2007 • Maximum printing width: 510 mm • Printing units: 3 dual-driven print stations • Application: Self-adhesive label production _____ Printing Equipment • 3 flexographic printing units with dual-drive technology • Plate cylinders (1/8"): 3 × 88, 3 × 92, 3 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 3 × 140 • Magnetic cylinders (1/8"): 2 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 4 × 140, 3 × 176, 3 × 184, 2 × 192, 1 × 222 • 13 anilox rollers (various volumes: 4.1; 5.04; 6; 6; 6.3; 6.09; 8; 8.25; 9.58; 13; 13.51; 16.57; 30) • 2 brand new anilox rollers • 3 sleeve systems z=88 for varnishing (including mounting station) • Screen printing unit _____ Die-Cutting & Converting • 3 die-cutting stations • 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) • Laminating station • Waste matrix removal on rail system: Gjdpox Hacrofx Aaxsbl o 2 matrix rewinders (upper/lower) • Double-spindle rewinder (roll-to-roll) • Insetter system for pre-printed webs • Register control for 5 stations (3 printing + 2 die-cutting, Sensotec) _____ Drying & Treatment • 3 × Uviterno UV curing systems (240 W/cm) • 2 × Lambda Technology NIR drying modules for water-based inks • Corona treatment 2 kW (SIT) _____ Web Guiding & Control • E+L web guiding system with: o 2 ultrasonic sensors o 1 line sensor • E+L ELSCAN video inspection system • Web cleaning system • Complete set of anti-adhesive rollers _____

Year of construction: 2000, condition: good (used), KOPACK 250 SUPER 6-colour letterpress press with flexo varnishing unit, full UV configuration, flat-bed and rotary die-cutting. This machine is engineered for high-quality self-adhesive label production and provides a compact, efficient setup including UV printing, die-cutting, and web handling. Below you will find the complete technical specification and commercial terms. Testing and inspection at the installation site can be arranged upon request. Technical Specification General Information Manufacturer: KOPACK Model: 250 SUPER Printing technology: 6 × letterpress printing units 1 × flexo varnish/coating unit Applications: Labels, self-adhesive materials, paper and film substrates Web & Format Maximum web width: 250 mm Rewind/unwind diameter: up to 800 mm (CI drum) Core diameter: 76 mm (3”) Material types: paper, self-adhesive laminate, film substrates Printing method: Complete UV curing system Register: Mechanically driven register system with gears Gjdpfxsx Ez Tvo Aaxebl Drying & Surface Treatment UV system: Full UV configuration Corona treater: Sherman Corona Treater installed (for improved ink and varnish adhesion on films) Web Handling Web guiding system: BST Web Guide Material transport with edge guiding and tension control Manual splicing table Printing & Finishing Units 6 × letterpress colour stations 1 × flexo varnish/coating unit Flat-bed die-cutting station Rotary die-cutting unit Integrated waste matrix removal and rewinding Electrical / Controls Central control panel Emergency stop system UV safety interlock protection Electrical documentation available (where present) Included Accessories Standard plate cylinders Die-cutting frames/rotary tools (as available) UV lamps with power supply units Web guide sensors and display panels

Condition: good (used), Year of construction: 2010, Industrial robot Manufacturer: Kuka Model: KR16L6-2 Year of manufacture: 2010 Reach: 1911 mm Weight: 240 kg Payload: 6 kg Kuka controller KRC2ed05 Weight: 209 kg Gjdpjtphqhsfx Aaxebl Processor: 2GHz Operating system: WinXP Software version: V5.6.11 Kuka teach pendant KCP2ed05 Kuka connection cables 7m/15m