Panel Feeding and Loading

NEOMEC AXEL C

Condition: new, Year of construction: 2022, Diameters 40-140mm Itsdpfx Aedprvuekpsn Engine 2.2kW Price per 1 piece

Condition: used, Aluminum silo (plastic granulate silo) resting on a base ring – used – designed for a bulk density of 0.8 kg/dm³ Volume: 50,000 liters Manufacturer: EVS Available quantity: 1 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Angle of the upper base: 15° Angle of the cone: 90° Equipment and connections: In the upper base: 1 x access hatch DN 600 with hinged cover 1 x vent 1 x roof edge railing with handrail 2 x crane lugs 1 x flange for filling line 1 x block flange for measuring and control technology Itedpfx Akeww Em Dspjn On the shell: 1 x access door approx. 870 x 1,960 mm Various pipe support brackets for the filling pipe 1 x filling pipe DN 80 1 x nozzle for level indicator Otherwise, as per the images and drawing.

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating Iodpfxjvmz Ido Akpjtn We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, next inspection (TÜV): 10/2025, Year of construction: 2020, operating hours: 900 h, Equipment: UVV, crane, low noise, rubber tracks, tip top condition! Iodpfjvriuvsx Akpotn

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Iedpfxjqmi Irs Akpjtn Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. Itsdpfx Akjwlp Hdjpsn We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, Round workpiece grinder Manufacturer: BRUSA & GARBOLI Country of manufacture: Italy Model: LT 130 - BRUSA DI GARBOLI Year: 2023 Technical parameters: min. diameter (with special feed rollers): 10 mm Isdpfx Akexdivaepetn max. diameter 127 mm min. - max. length 680 - 6000 mm sanding belt size 2000 x 120 mm disk motor power 2.2 kw sanding belt motor power 5.5 kw feed motor power 0.25 kw feed speed 1 - 20 m/min weight 760 kg dimensions 160 x 13 5x 170 cm electrical connection 400V / 50Hz feed system self-centering feed speed regulation frequency sanding belts 1 set Adjustment tools 1 set Instruction manual 1 set CE certificate of conformity Optional equipment: PLC control unit “Keyence” photocell, control of opening/closing of the grinding belts Outgoing workpiece feed rollers with drive

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % Itoder Iyvbjpfx Akpen - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 %

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Itjdjt Amc Ispfx Akpon

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 2,200 kg, This advertisement serves solely for informational purposes and does not constitute a legally binding offer. The H180 model is the ideal equipment for agriculture, the construction industry, the electrical, plumbing, repair, and similar sectors. We also guarantee equipment service even after the warranty period has expired. Wheel loaders are manufactured based on and under the supervision of European technicians. The equipment consists of a robust structure and can operate under all conditions. DIMENSIONS AND WEIGHT: Length (without attachments): 3.5 m Length (with standard bucket): 4.25 m Overall width: 1.1 m Overall height: max. 2.4 m / min. 1.7 m Empty weight (without bucket): 2200 kg Wheelbase: 1.86 m Axle distance: 1.55 m Tires: 10.0/75 – 15.3 OPERATING PARAMETERS: Lifting height (lower edge of the standard bucket): 2.8 m Maximum lifting height (top edge of the attachment): 3.2 m Maximum lifting height (top edge of the bucket): 3.5 m Dumping height (45°): 2.4 m Maximum lifting capacity (at the attachment): 800 kg WORKING EQUIPMENT AND HYDRAULIC SYSTEM: Bucket width: 1.05 m Bucket volume: 200 liters Bucket weight: 130 kg DRIVE AND TECHNICAL EQUIPMENT: Engine: KUBOTA – DIESEL Itodpfx Ajyk Edzokpjn Engine model: D1105 Engine power: 18.2 kW – 25 hp Battery voltage: 12 V Gears: 1 Drive: hydrostatic Brakes: disc brake Parking brake: drum brake ADDITIONAL EQUIPMENT: Bucket and forks Road lighting Trailer hitch Additional hydraulic circuit Joystick control 4x4 drive Quick coupler PWG pump Italy PRICE: €14,500 net €17,255 gross