Lead/traction spindle lathe

NARDINI MS 175 E

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm Kdedpfxswc Dzws Aqgjl --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev 3 - jaw chuck Multifix steel holder size B, 1 x inserts 2 x travelling steady rest, Operating instructions

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width Kodpfx Aqjx Nrvvjgodl - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: not inspected (used), functionality: unexamined, turning diameter: 360 mm, center height: 180 mm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Swing diameter over bed: approx. 360 mm Swing diameter over cross slide: 240 mm Center height over cross slide: 120 mm Center height over bed: approx. 180 mm Spindle bore: approx. 48 mm Center distance: approx. 700 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Connected load: 4.8 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 1,600 mm Weight: 1,000 kg EQUIPMENT Kedpfx Ajym N D Deqgedl Tailstock Multifix quick-change tool post Quick-change chuck Various steadies Digital readout External reference: Lot 18 / Ulmer

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 1,930 kg, Binderberger GI25EZ proline horizontal meter log splitter Year of manufacture: 2023 Weight: 1,930 kg Operation: electric or PTO Towable with secondary registration plate up to 25 km/h Ksdeyg I Dpepfx Aqgodl Splitting length: 130 cm Splitting speed (cm/s): forward: 25/27, return: 23/25

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 Kodpfx Aqotqqlljgodl control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: good (used), Qty 2 Linx Ink Jet Coders Models 7900 & 7300 In good working condition Fully serviced In working condition Kedjkyumkspfx Aqgedl

Year of construction: 2006, condition: used, Yamato ADW 514 multihead weigher MHW : Yamato Sigma 514SV Ingress Protection: :IP65 Weighing capacity : 20 - 2000 grams per dump Weighing volume : max. 5 liter per dump Configuration Details: Machine completely built in 304 Stainless steel. TC : 15 degrees, vibratory type LFP’s : Sigma Type Feed Buckets : Double door opening Kjdpfx Aoudqmreqgedl Bucket volume : > 2,5 liter Weigh Buckets : Double door opening Bucket volume : > 2.5 liter Collating chutes : 60 degrees HMI : RCU810 color touch screen The model comes with a newer upgraded RCU (control panel). MHW: Yamato Sigma 514SV HMI: RCU810 color touch screen Bucket volume: > 2.5 liter

Condition: new, Year of construction: 2026, 0350 mm 196 mm 0650 mm 170 mm Kodpfx Aoxxb Azsqgodl 42 mm 7,5 kW

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Kdsdpfx Aqsvxlqmjgel Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles Kdodpfxot I R Edj Aqgol - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein