CNC Lathe Nakamura-Tome NTJ-100

NAKAMURA-TOME NTJ-100

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 31i-B, _____ Description: Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mm Turning length : 678 mm In General: Year of manufacture:2015 Control system:Fanuc i 31-B Turning diameter:175 mm Max. turning length:678 mm Spindle: Technology:Motorised spindle Speed:4,500 rpm Power:11 kW Bar capacity:65 mm C-axis:0.001° Clamping cylinder:Hollow clamping cylinder Chuck:Collet chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Power:7.5 kW Bar capacity:51 mm C-axis:0.001° Clamping cylinder:Semi-hollow clamping cylinder Chuck:Collet chuck Tool carrier I (X/Y/Z/B): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:330 mm Y-axis:80 mm (+/- 40 mm) Z-axis:1,040 mm B-axis:182° (+/- 91°) Lodpfx Aoy Hnt Eel Iohh Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:127 mm Y-axis:65 mm (+/- 32.5 mm) Z-axis:678 mm Equipment: Chip removal:Chip conveyor Coolant supply:2x high-pressure coolant pumps Bar feeder:IEMCA Master 80 HF - 4 meter Finished part removal:Part gripper + conveyor belt Set-up operation:Electronic handwheel

Condition: new, Year of construction: 2019, Balancing Machine Haimer TD 2009 Condition: As new (unused) Machine weight: approx. 350 kg Terminal weight: 50 kg Lsdpfxoxz R Ure Al Iohh Spindle speed: 300 – 1100 rpm Measurement accuracy: < 0.5 gmm Smallest measurable unbalance: 0.5 gmm Pneumatics, required operating pressure: 0.5-0.6 MPa, 5-6 bar Air consumption: 30 l/h Operating voltage: 230 V Frequency: 50-60 Hz Total connection current, protected on site: 1 x 16 A Residual current circuit breaker: Type B Power consumption: max. 1.0 kVA Current consumption: max. 7.5 A Noise emission: < 70 dB Protection class: IP 50 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Lodpfx Alex D Iuzj Iohh Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,430 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 2,900 mm, total length: 4,855 mm, total width: 2,945 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, LAGUN L 1400 machining center – available for immediate delivery The LAGUN L 1400 machining center stands for high precision, robust design and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease-purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics and durable machine concepts. The machining centers impress with their reliability, easy maintenance and low operating costs. Technical equipment: Control: HEIDENHAIN TNC 7 digital control HEIDENHAIN TFT screen 16" HEIDENHAIN motors, measuring systems and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Lodpohy Atfsfx Al Ijhh Preparation for 4th axis (rotary table) Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer for you.

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Power-on hours: 63,133 h Spindle operating hours: 28,596 h TECHNICAL DATA: Travel distances: X-axis: 750 mm Y-axis: 600 mm Ljdsyq H Aropfx Al Iohh Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): [bar] Oil mist extraction Tool breakage control: Blum Laser Measuring probe Mode of operation: 4 Electronic handwheel

Condition: used, Year of construction: 2018, operating hours: 43,202 h, functionality: fully functional, Doosan Lynx 2100LM – CNC Lathe SPECIFICATION • Control: Siemens S828D • Main spindle max. speed: 6000 rpm • Main spindle motor power: 12.6 / 10.5 kW • Driven tool power: 6.2 / 4.1 kW • Tool stations: 12 • 3-jaw hydraulic chuck: 170 mm • Turning diameter (bed/turret): 600 / 400 mm • Max. workpiece size: Ø 300 x 510 mm • Max. bar diameter: 51 mm • Rapid traverse (X/Z): 30 / 36 m/min • Turret index time: 0.11 sec • Axis travel: o X: 205 mm o Z: 560 mm • Machine dimensions: 2540 x 1595 x 1693 mm • Machine weight: 3480 kg Equipment • High-pressure coolant, 0.7 MPa • Tool presetter • 8 static and 4 driven tool holders • Tailstock • Collet chuck • Parts catcher Lhsdpfxjya N Ipe Al Ijh • Bar feeder preparation • 3 m LNS bar feeder • Chip conveyor (LNS MH500)

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-hand machine) Technical specifications: Travel ranges: 450x300x300mm Workpiece table 820x400mm Tank size 900x520mm Filling level 300mm Distance table/electrode holder 150/450mm Workpiece weight max. 800kg Dielectric fluid max. 700l Dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Power connection 3/N/PE 400/230 50Hz Power consumption 6.7 kVA Equipment: Color: Newly painted light grey + telegraph grey New control cabinet New control system APC910/2 (win10) User interface MF30 V 2.8 New B&R drives with Endat interface Touchscreen Generator exopuls+ 60A Rev.4 Rotary table, 5-axis Touch protection, operated via buttons Linear scales in all axes X, Y, Z (Fagor) Cartridge filters 2 pcs Cooling unit Termogamma Completely new machine installation New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO2 extinguishing system C-axis Hirschmann 50/min., holding brake, completely overhauled Manual control panel with confirmation button Lowering tank with automatic follow-up Chucks Erowa IST, Hirschmann, 3R Warranty 12 months Lhjdpfx Alshtrdys Ioh Transport Commissioning on-site Training

Condition: new, Year of construction: 2025, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, faceplate diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Maximum swing diameter: Ø3,000 mm Maximum turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Ljdpfexqb D Nox Al Iehh Table indexing: 0.001° Z-Axis (vertical ram travel): 1,200 mm Main spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holders: New 240 TCR-01 (2 pieces) Splash guard: Table version (R-type standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge-type 4-jaw independent manual chuck Foundation anchor bolts / shims Maintenance tools and toolbox Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions - on request Automatic shutdown for N.C - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3 phase - on request Linear scales X, Z-axis - on request Rigid tapping - on request Automatic tool changer ATC 24 positions - on request Other notes: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Ledjh Nypfepfx Al Iehh

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Lhodpfxey E Ixxj Al Ijh Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation