CNC lathe

Muller Pesant Challenger 3

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min Pjdpfx Ajvc Awrecvopp feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Psdpfsuxrv Hox Acvopp Technical data shown on pictures.

Condition: used, Year of construction: 2010, 2 Number of axles 4 St. Pedpfx Acjqn A Rkevepp tool taper HSK 63 toll turrets 60 weight 9600 kg

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Psdpsvbhv Rjfx Acvspp Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Pedpfx Acev Uqb Njvopp

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm Ppedpfxjvprxfo Acvop fine adjustment 4 mm max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, fuel type: diesel, tank capacity: 34 l, color: black, output current: 65 A, output voltage: 230 V, output frequency: 50 Hz, nominal power: 12 kW (16.32 HP), continuous power: 10 kW (13.60 HP), total length: 930 mm, total width: 660 mm, total height: 900 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, Proton 12000 230V Oasis gensets work well wherever peace and quiet are valued. This is a genset for demanding conditions of use. In addition to silence and high power, the genset is water-cooled which ensures round-the-clock operation. ABBREVIATION: Genset type: Single-phase Fuel type: Diesel Liquid-cooled: Yes Voltage: 230 V Rated power: 230V - 10,000 watts (12.5kVA) Maximum power up to 15 minutes - 12,000 watts (15 kVA) WEIGHT: Gross weight: 330kg FUELING: 2.2 liters per hour (at 70% of maximum power) 1.8 liters per hour (at 40% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 2V8-W Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 2 Direct injection - Yes Type of cooling - Liquid (The unit has a radiator) Displacement - 998 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 24 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure sensor - Yes Oil condition sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 1100W Oil sump capacity - 2.5l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Ppjdpfetqffcjx Acvsp Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 220-CAVR-D Rated current (230V) - 65 A Voltage - 230V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Enclosed - Silenced Ability to discharge exhaust fumes outside the facility - Yes Sound pressure level LPA - 73dB (measurement - 5m, open space) Fuel tank capacity - 34 liters Operating time on a full tank (Average) - 12 hours SOCKETS: Number of three-phase outlets - none Number of single-phase outlets - 1 piece (32A), 1 piece (16A) Number of other outlets - none DIMENSIONS: Diameter of wheels - 10 cm Width - 66 cm Length - 93 cm Height - 90 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - No Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 1xC39 (for 230V) Hour meter - Yes Battery - 45 Ah TRANSPORT KIT: Yes - Small wheels Yes - Handrails on two sides Yes - Swivel wheels Yes - Wheels with mechanical lock RICH EQUIPMENT See below what else the kit includes: - Battery - Air filter - Oil filter - Fuel filter - Keys for current service - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Pedpfx Acjfx Ibnsvepp MDV 2000 Characteristics: Max wheel diameter: 2000 mm Min wheel diameter: 50 mm Max module: 12 Min module: 3

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Ppodpfocirnijx Acvep Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, ANAK – MATIC 7 CNC – 3-Axis machining center | HEIDENHAIN TNC 426 | 1000 x 500 x 505 mm. Compact and reliable 3-axis CNC machining center, ideal for precise milling operations. Equipped with high-speed spindle and HEIDENHAIN control. Ppjdpfekuz I Nox Acvep 🛠 Key specifications: • X-axis travel: 1000 mm • Y-axis travel: 500 mm • Z-axis travel: 505 mm • Main spindle: 7.5 kW – 6000 rpm • CNC control: HEIDENHAIN TNC 426 • Number of axes: 3 • Table size: 1150 x 475 mm • Machine weight: 5000 kg ✅ Perfect for: • Small to medium part production. • Job shops and subcontract machining. • Tooling, moldmaking, general precision parts. 📌 Ready for immediate delivery. Stable, accurate, and proven – powered by HEIDENHAIN.