8-cornered clamping table

MTI Unbekannt

Condition: good (used), max. working width: 2000 mm for metal sheets up to: 1 mm opening width top clamping bar: 70 mm Pgodo Ixynopfx Acvsi adjustment bending cheek: 10 mm space needed: 2300 x 600 x 1050 mm

Condition: used, mileage: 1,400 km, power: 43 kW (58.46 HP), first registration: 07/2008, fuel type: diesel, overall weight: 4,900 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 1,400 h, Equipment: air conditioning, all wheel drive, HU/AU new, 08.07.2008 1,400 operating hours 43 kW 2,746 cm³ industrial front loader Diesel All-wheel drive Cabin Air conditioning Hydraulic shuttle Turf tires Agricultural tires possible Permissible total weight 4,900 kg FOR US, CONDITION AND GUT FEELING ARE DECISIVE, PRICE IS SECONDARY. For further questions, Mr. Faller will be happy to assist you at the following number. //*TRADE-IN, PART EXCHANGE OR LEASING OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee* More offers can be found on our homepage: The description and stated data do not constitute a binding agreement and are not guaranteed. The only legally binding document is the purchase contract concluded at the dealership. Subject to errors and prior sale! Pjdpfx Aevidc Ascvsgi

Condition: new, empty load weight: 830 kg, maximum load weight: 2,670 kg, overall weight: 3,500 kg, loading space length: 3,970 mm, loading space width: 1,860 mm, loading space height: 1,740 mm, tire size: 195/50r13c, Disposal of bulk goods, bulky waste, rubble, garden waste or similar and the delivery of building materials, gravel, sand and firewood is made much easier with these container trailers. You place the skip or flatbed of the car trailer directly in the driveway or in front of the house for your customers. The building rubble from the old bathroom goes into the steel skip. This means that several construction sites can be managed simultaneously by one driver. With the hook and the built-in electric hydraulics with radio remote control, the optional skips or flatbeds can be easily picked up and pushed off the car trailer. The trailer can also be used as a reverse tipper by operating the frame. When being pulled up, the containers lock automatically and are secured against falling off the skip container trailer. ATTENTION: Dump body and flatbed are not included in the price! The skip trailer has the following as standard a hook with hydraulic ram, electro-hydraulics and built-in battery, radio remote control, charger, jockey wheel, extremely stable welded frame and V-drawbar painted in dark gray. Technical details can be found below. The skip body trailer is available with steel skips, flatbeds, lattice top, tarpaulin & frame and trailer lock as accessories --- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Pjdpfx Aceftwq Esvjgi Saturday is not possible!

Condition: new, Year of construction: 2025, machine/vehicle number: 732335740, Mobile jaw crusher on crawler track Diablo crusher is the most modern machine in the category with 30 tons. It is equipped with the latest control and operation systems of the latest generation, it is simple and user-friendly, and environmentally friendly to boot. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guarantees the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to to stresses and strains. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. Production capacity: approx. 220 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 3000 mm dust extraction system tank pump magnetic separator warranty 1 year to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 1000 x 600 mm crushing gap from 40 to 170 mm Feed hopper 4m³ - 1820 x 3700 mm Grizzly feeder version 900 x 3300 mm Main conveyor belt 800 x 9600 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel Chain drive 400 x 2920 mm Weight: kg transport length 12500 mm Transport width:2530 mm Transport height 3150 mm Further information Podpshd I Sxjfx Acvogi Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: new, Year of construction: 2025, machine/vehicle number: 860828850, Gasparin GI1010CV K1 mobile impact crusher on crawler track The K1 impact crusher with tracked undercarriage, the new addition to the product range with impact mill with a capacity of 250 t/h . Can be equipped with re-screening with closed circuit recirculation to perfectly calibrate the final product. It is appreciated for the excellent quality of the crushed product and also gives its best in terms of operating economy. Production capacity: approx. 250 TO/H Proportional distributor with \"Load Sensing \" for optimization of the system and reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during the crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Impact crusher type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20mm only possible with 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm Pgjdpfxohd I T Ie Acvoi single deck vibrating screen 950 x 1500 mm Main conveyor belt 800 x 9600 mm 4 cylinder diesel engine with constant speed 82 HP/60 KW , exhaust gas stage V Control panel chain drive 400 x 2900 mm Weight: kg Transport length 12560 mm Transport width:2550 mm Transport height 3200 mm More information Application: construction, Empty weight: kg, General condition: very good, Technical condition: very good, Visual condition: very good, Transport dimensions (L x W x H): 12.56x2.55x3.2,

Condition: new, Year of construction: 2025, machine/vehicle number: 381201764, Gasparin GI118CV OLIMPO mobile jaw crusher on crawler track The pure power expressed by OLIMPO thanks to the crusher 1100x800 is the ideal condition for a specific machine for the professional in quarrying and recycling. An uncompromising machine whose design has taken into account the requirements in terms of use, productivity, effortless maintenance and transport. Equipped with control and operating systems of the latest generation, it is simple and user-friendly and at the same time environmentally friendly. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guaranteeing it the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to stresses. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. The OLIMPO crusher is sure to offer convincing and incomparable performance in natural stone, recycling and and for rentals, the OLIMPO crusher offers a convincing and incomparable performance. Production capacity: approx. 360 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 3200 mm dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 1100 x 800 mm crushing gap from 50 to 200 mm feed hopper 5 m³ - 2000 x 3970 mm , foldable to transport dimensions two-deck vibrating screen 1020 x 2000 mm Main conveyor belt 1000 x 11000 mm 4 cylinder constant speed diesel engine 82 HP/60 KW , exhaust gas stage V Control panel chain drive 450 x 3800 mm Weight: kg transport length 13850 mm Transport width:2550 mm Transport height 3390 mm More information Psdpfshd I U Eex Acvsgi Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. Pgodpfx Aowzmcbjcvji • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, table height: 800 mmmessurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 355 Pedjfk Ai Dspfx Acvjgi Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 475This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Pgedpofk E D Aofx Acvei For more information please follow this link:

Condition: new, Year of construction: 2024, Diameter of the holes: 20 mmmessurements (LxWxH): 2250 x 1000 x 1000table width: 1000table length: 2250working height: 93-103plate thickness: 12Medium welding table Product specifications welding tables - The size of the top is 2250mm x 1000mm - Round reinforcement edge of 140mm in height, provided with a two-row hole pattern. - The hole pattern is centre to centre 100mm by 100mm. - Provided with the necessary reinforcement ribs in width and length. - The material of the table is S355, stained and oiled. - The legs are fitted with ball joints and are adjustable in height. - The welding table is oiled and stained. This creates a smoother work surface and the table is less prone to welding spatter. Psdpfx Aeukkr Nscvegi Additional options: engraved lines:                       75¤  Hole diameter 16 mm:            80¤  Hole diameter 28 mm:            80¤  Diagonal hole pattern 50x50: 150¤  4 adjustable wheels:               360¤