Used Worm Grinding Machine for sale (65,286)

Condition: used, Year of construction: 1970, Technical details: Ledpfx Adoypm Ifsqeri grinding diameter max.: 400 mm max. width of grinding wheel: 180 mm grinding range: 2-100 mm total power requirement: 24 kW weight of the machine ca.: 3,2 t Out of valve production *

Condition: new, Year of construction: 2024, Grinding wheel DxB 455 x 255 mm workpiece diameter 1-60 mm, control disc DxB 255 x 255 mm, disc speed 10-100 rpm, power SS 11 kW, weight approx. to 3.7, size approx. 2,700 x 1,700 mm Machine is suitable to the pass and feed grinding, hardened and ground Guide pave grinding and control spindle with hydrodynamsicher three-point bearing, lubrication for carriage and delivery spindles, rule discs powered by DS engine, frequency controlled, hydraulic dressing equipment for grinding and rule disc. Equipment of electrical, predominantly with Siemens components, electrical cabinet in Germany built up, GC 1810-NC stepper motor with Siemens S7 control for grooving and extra movement. Lredjdlgq Uepfx Adqei Very economic price / performance ratio

Condition: not inspected (used), functionality: unexamined, Two machines are being sold as a package for spare parts. Centerless grinding machines ----- 1* Manufacturer: NOMOCO, Type: M100 E Machine no.: 5069 Year: 1977 Max. grinding diameter: 100 mm Max. grinding length: 180 mm Grinding wheels: Ø 400 mm Max. wheel width: 180 mm Weight: 3,200 kg ----- Manufacturer: NOMOCO, Type: M100 Machine no.: 2338 Year: 1974 Machine is equipped with a stack magazine, feed through a pusher. Machine is set up for plunge grinding. Conversion to through-feed grinding possible. ----- * The concentricity testing device is not included in the scope of delivery. The machine has been disconnected from the power supply, i.e., it cannot be demonstrated under power. Removal and loading are at the buyer’s expense. For prices, please refer to the "Documents" section, or send an inquiry by email. Lrsdpfx Aeyc N D Nodqsi A forklift for loading is not available, but can be arranged if required.

Condition: reconditioned (used), functionality: fully functional, Herminghausen SR2 Centerless Cylindrical Grinding Machine High-precision and conventional centerless cylindrical grinding machine. Suitable for grinding workpieces up to 40 mm in diameter. High machine and grinding stability due to a robust cast iron base and hydrodynamic segment jaw bearings. The low construction height provides excellent accessibility to all essential functions. Fast and simple conversion for different workpieces and materials. Ljdpfx Adeyvn Ubsqsri The machine has been disassembled, defective parts replaced, painted, and rebuilt. It is in very good mechanical and electrical condition, ready for immediate operation. Commissioning and training/instruction in machine operation and grinding technology are available.

Condition: used, Year of construction: 1990, grinding diameter 200 mm Lsdpfeywnt Hox Adqori grinding length 340 mm centre height 100 mm Control CNC 25 kVA voltage 110 / 220 / 3x165 / 3x380 VAC control voltage 24 VDC

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm centre height 125 mm Ledpfxeywntys Adqori Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Marposs Messeinrichtung Innenschleifeinrichtung

Condition: ready for operation (used), Year of construction: 2013, total height: 1,900 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: 21i-MB, General Data Measurements width 2400 mm Lredpfx Adsx D Nzceqei Measurements depth 2000 mm Measurements height 1900 mm Machine weight 6000 kg Control Unit Brand FANUC Model 21i-MB Additional Equipment Kraft & Bauer Fire extinguishing system, Type FB703S-UV3-TFM70°/KLA 6-S-MV / Knoll microfilter, Type Micro Pur 240 F / Streuli lifting station, Type SHSRT300-TL142/180 This TSCHUDIN ecoLine 400 centerless grinding machine was manufactured in 2013. It features a Fanuc 21i-MB control system, a grinding wheel with a max outer diameter of 400 mm, and a regulating wheel with a speed range of 0-265 rpm. Additional attachments include a Kraft & Bauer fire extinguishing system and a Knoll microfilter. Consider the opportunity to buy this TSCHUDIN ecoLine 400 centerless grinding machine. Contact us for more information about this machine. Application Types Grinding

Year of construction: 2012, condition: ready for operation (used), Main Drive Number of axis 3 Additional Equipment Sanding Unit/Sanding Belt: 120 x 2300 mm/Drive Power: 7.5 kW/Belt Tension: Pneumatic/Oscillation Range: 10 - 80 mm for optimum belt utilization and cooling/Removal Rate: Approx. 80 cm³/min Lredsx D Hkzjpfx Adqsi This 3-axis KUHLMEYER Fasen Fix 4.1-1500 grinding machine was manufactured in 2012. It is designed for precision grinding applications, offering robust performance and reliability. If you are looking to get high-quality grinding capabilities, consider the KUHLMEYER Fasen Fix 4.1-1500 machine we have for sale. Contact us for more information. Application Types Grinding

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 1984, Second hand tangential grinding machine Lsdpfx Adjrfwzlsqori Brand: Txurtxil Model: NX Machine serial number: 1984 All automatic movements, including Z axis. Characteristics: Grinding capacity: 600x300mm Magnet table dimensions: 500x200mm Power: Three phase 380V Total power: 7CV

Condition: good (used), workpiece weight (max.): 250 kg, distance table to spindle center: 457 mm, overall weight: 2,900 kg, grinding spindle speed: 3,450 rpm, Chevalier FSG-3A818 Surface Grinder – Automatic Z Axis Brand: Chevalier Model: FSG-3A818 Serial No.: M3905002 Automatic Z-axis feed. Table dimensions: 203 × 557 mm Magnetic table: 200 × 450 mm Max. grinding travel (X, Y): 457 × 203 mm Distance from table to wheel center: 457 mm Longitudinal movement: - Speeds: 5 to 25 m/min - Max. manual travel: 530 mm / hydraulic: 500 mm Cross movement: - Max. movement speed: 960 mm/min - Automatic feed increments: 0.4 to 6 mm Vertical movement: - Automatic feed: 0.002 to 0.04 mm Wheel rotation speed: 3450 rpm Total power: approx. 3.7 kW Wheel diameter: 203 mm Maximum workpiece capacity on grinder: 250 kg (including magnetic table weight) Lodewwrd Njpfx Adqsri Dimensions: 2180 × 1575 × 1900 (H) mm Weight: 2900 kg

Condition: used, Surface grinding machine Brand: Ger Model: RS-75/35 3 automatic axes (X, Y, Z) Technical specifications Low column: - Maximum grinding area: 750x375mm (X, Y) - Table to grinding wheel center distance: 525mm Lredowx Nlmjpfx Adqei - Table speed: 2 to 32m/min. - Maximum table travel: 800mm - Maximum workpiece weight: 500kg - Magnetic table: 700x250mm Cross travel: - Maximum cross travel: 350mm - Rapid cross feed: 1.5m/min. - Automatic cross feed: 2 to 60mm/rev. - Handwheel revolution: 3mm - Handwheel division: 0.02mm Vertical movement: - Rapid vertical feed: 200mm - Handwheel revolution: 0.24mm - Handwheel division: 0.002mm - Wheel dimensions: 300x50x76.2mm Motors: - Head: 6Hp - Pump: 3Hp - Feeds: 0.75HP - Total: 7.5KVA Weight: 3,700kg Dimensions: 2,400x1,850x2,300mm

Condition: like new (used), functionality: fully functional, grinding length: 650 mm, grinding width: 300 mm, grinding wheel diameter: 160 mm, overall weight: 2,550 kg, power: 4 kW (5.44 HP), Brand: CCP - STANKOIMPORT Model: 3E711B Dimensions to grind: 650x300mm (X, Y) - 320mm (Z) Magnet table surface: 630x200mm Permissible table weight: 150kg Distance spindle axis to table surface: 80 - 445mm Maximum stroke of the grinding head: 365mm Manual table travel: (700mm, 250mm) Table travel speed: 2 - 30 m/mm. Cross traverse speed: 0,01 - 1,5m/mm. Vertical feed rate graduation value: 0,002mm Vertical micro. graduation value: 0,0005mm Transversal feed graduation value: 0,5mm Micro. vertical feed graduation value: 0,001mm Transverse displacement one revolution of the nonius: 5mm Vertical displacement one turn of the vernier: 0.20mm Automatic table traverse feed longitudinal course: 0,2 - 30mm Automatic feed rate for grinding head: 0,002 - 0,08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kw Lodpfsqy H Dpex Adqori Weight: 2550 kg.

Condition: used, Year of construction: 1982, grinding length: 600 mm, grinding width: 550 mm, total height: 2,490 mm, feed length X-axis: 600 mm, feed length Y-axis: 470 mm, feed length Z-axis: 600 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, table length: 1,100 mm, table load: 400 kg, table width: 450 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 1,400 rpm, overall weight: 5,300 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 1,400 rpm, rotational speed (min.): 1,400 rpm, grinding spindle speed: 1,400 rpm, disc diameter: 400 mm, space requirement height: 2,490 mm, We are offering this used ELB-Schliff Oprimal 3 ND surface grinding machine, year of manufacture 1982. Maximum grinding length: 600 mm Maximum grinding width: 550 mm Lredpoyrn Sdofx Adqei Working height with new grinding wheel: 400 mm Working height with worn grinding wheel: 600 mm Spindle taper ratio: 1:5 Manual vertical travel of grinding spindle: 600 mm Manual horizontal travel of grinding spindle: 470 mm Swivel range grinding spindle: 1° Clamping table surface: 1100 x 450 mm Small table stroke: 80 mm Number of T-slots: 1 T-slot width: 16H7 mm Cross feed (table): 470 mm Longitudinal feed (table): 600 mm Table load capacity: 400 kg Outside diameter of grinding wheel: 400 mm Inside diameter of grinding wheel: 127 mm Grinding wheel thickness: 100 mm Recess 1 diameter: 190 mm Recess 1 thickness: 20 mm Recess 2 diameter: 190 mm Recess 2 thickness: 30 mm Machine height: 2.49 m Weight: 4700/5300 kg Direct spindle speed: 1400 min⁻¹ Continuous feed rate, grinding spindle carriage: 1.2 m/min Intermittent feed rate, grinding spindle carriage: 3–60 mm Hydraulic table feed speed: 1–30 m/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, weight 2600 kg height 1550 mm 0 2197 l length 3800 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz engine output 2 x 7 kW The VKT 2200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. Lredpfx Aoymf Sqedqji With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 500 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, Year of construction: 2025, weight 340 kg diameter 960 mm height 980 mm 0 219 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work Lsdpsymf Raefx Adqeri pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, weight 1350 kg Lredsymf Irspfx Adqei diameter 1760 mm height 1240 mm 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, weight 540 kg diameter 1200 mm height 1100 mm 0 382 l total power requirement 1,9 kW voltage 350/50 V length in total 1820 mm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Lredpfxsymf Hze Adqei Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: used, total length: 3,700 mm, total width: 1,000 mm, total height: 1,700 mm, overall weight: 800 kg, oscillation stroke: 30 mm, grinding belt length: 1,500 mm, grinding belt width: 150 mm, power: 6.5 kW (8.84 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 2,800 rpm, No. 04513 Profile grinding machine / automatic edge processing machine Rehnen KBA Used Profile grinding machine / automatic edge processing machine for grinding edges, milling profiles, and grinding profiles in a continuous process. The machine also has a corner copying milling machine. The materials to be processed are solid wood, chipboard, and MDF. Material thickness 10 - 65 mm Material length min. 50 mm Material width min. 60 mm Feed speed 8 m/min Total power 6.5 kW Equipment: - Oscillating edge sanding device (sanding belt dimensions 150 x 1500 mm / 1400 and 2800 rpm / oscillation stroke 30 mm / contact roller and sanding shoe) - Upper milling unit - Lower milling unit - Corner copying milling machine / corner rounding milling machine - Bottom profile sanding device - Top profile sanding device - Feed chain conveyor with top pressure Incl. technical documentation Incl. 6 used profile belts (must be refitted) Transport dimensions approx. 3700 x 1000 x 1700 mm LWH Weight approx. 800 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Lsdpfx Ajytd Tmsdqori For used machines, any warranty is excluded; the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 457 mm, travel distance Y-axis: 171 mm, travel distance Z-axis: 504 mm, spindle speed (max.): 2,640 rpm, Equipment: CE marking, documentation/manual, Tangential Surface Grinder J.S 540 X Workable Surface Area: 457 x 152 mm Lrjdpfxeyuwvkj Adqsi Vertical Travel: 504 mm Standard Grinding Wheel Size: 200x20x31.75 mm Grinding Wheel Speed: 2640 RPM Operation and Maintenance Manuals CE Declaration Tank with Paper Filtration

Condition: good (used), Year of construction: 1986, Inner diameter: 20…400 mm Grinding depth: 315 mm Internal grinding spindle speeds, stepless: 2,640…16,500 rpm Workpiece spindle speed: 40…400 rpm Table feed rate: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Total power requirement: 16 kW Machine weight approx.: 5.8 t Additional information: Grindable diameter within workpiece guard: internal 20…400 mm; external 500 mm Max. workpiece diameter in workpiece guard: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2,640…16,500 rpm Drive power for face grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40…400 rpm Table speed: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Lrodsyw Ib Djpfx Adqei Max. distance from workpiece spindle flange to grinding spindle carrier: 1,250 mm

Condition: excellent (used), workpiece diameter 60 mm grinding depth 30 mm clamping length 1000 mm Lrodpfxount Ege Adqei weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Ledpjx Dm Dnofx Adqjri

Condition: used, centre distance 2.500 mm centre height 250 mm grinding wheel diameter 600 mm Total travel of the grinding support 320 mm spindle speeds 50 - 450 mm tool adaptor MK5 tail stock MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 Ljdpfxsx Avtco Adqsri the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500

Condition: excellent (used), Year of construction: 2000, Description to follow! Lsdpfsyrtwxox Adqeri

Condition: excellent (used), Year of construction: 1994, Description to follow! Ljdpeyrtwrjfx Adqori