Used Work Bench for sale (51,718)

Condition: used, Year of construction: 2022, total length: 8,340 mm, - Arbeitshöhe 20 m - Bodenfreiheit (Zugang) 0.45 m - Plattformhöhe 18 m Rodpfoztf Tgox Al Uocf - Maximale seitliche Reichweite 11.57 m - Ãœberhang / Knickpunkt Gelenk 7.91 m - Korbarm-Drehwinkel (oben / Boden) +65 ° / -60 ° - Tragfähigkeit des Arbeitskorbs 250 kg - Drehung des Oberwagens 350 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Anzahl Personen (innen / außen) 2 / 2 - Gegengewicht Versatz (Oberwagen bei 90°) 0.61 m - Innerer Wenderadius 1.27 m - äußerer Wenderadius 3.78 m - Fahrgeschwindigkeit - Transportmodus 5.30 km/h - Fahrgeschwindigkeit - Arbeitsmodus 0.65 km/h - Steigfähigkeit 40 % - Zulässige Neigung im Arbeitsmodus 4 ° - Bereifung Schaumgefüllt - Reifenmodelle 914 x 370 mm - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 - Gebremste Räder / Räder 0 / 2 - Batterie 48 V - Nennspannung der Batterie / Batteriekapazität 48 V / 460 Ah - Batterieenergie 22 kWh - Integriertes Ladegerät / Integrated charger 48 V / 60 A - Bodendruck 11 dan/cm2 - Hydraulikdruck 240 bar - Fassungsvermögen des Hydrauliktanks 24 l

Condition: used, Year of construction: 2026, total length: 10,030 mm, Telescopic work platforms Magni DTB24RT Drive Diesel Year built 2026 Rcjdeztf Svjpfx Al Uef Work height (mm) 24,800

Condition: used, Year of construction: 2007, operating hours: 1,632 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to prior sale, errors, and omissions: Skyjack TM scissor lift Type SJ6832RT Diesel 4x4 Manufactured 09/2007 Maximum working height 11.70 m Maximum platform height 9.70 m 1,632 total operating hours, with 1,514 operating hours on the new Kubota engine Rcodpfx Aszviuyel Uef New Kubota engine installed in 2021 for €7,000.00 (net), with 118 hours of operation since, and kept as a backup unit. Platform dimensions 1.42 m x 2.49 m Platform extension 1.50 m Maximum permissible gross weight 3,475 kg Payload 454 kg 2 persons Overall length 2.72 m x overall width 1.73 m x overall height (min, terrain foldable) 2.51 m Diesel engine, 4x4 Gradeability 40% Travel speed 0.6 - 6.1 km/h Lifting time with rated load 39 sec Driving at full height with extended platform Diesel engine mounted on extendable support Platform extension 1.50 m Spring-loaded, self-closing full door Foam-filled tires Tilt sensor with alarm and automatic emergency shutdown Hour meter Overload sensors Price: €9,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000.00 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to prior sale, errors, and omissions.

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 180 kg, empty load weight: 810 kg, fuel type: electric, Haulotte Star 6 Year of manufacture: 2013. Operating hours: 341. Transport weight: 810 kg. Working height: 6 meters. Platform capacity: 180 kg. 24-volt batteries with a 230-volt charger. Width: 78 cm. Price net + 21% VAT or net for export. We are open to your price offer! We speak Dutch. Rsdpfxozr N Dte Al Uecf We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment available upon request. Chassis Regular ladder frame in lightweight steel construction with continuous crossmembers. Coupling plate, 8 mm thick, with a 2-point kingpin according to DIN 74080 / ISO 337. Suspension Axle lift mechanism on axle 1. Manufacturer of choice: Kögel - three-axle unit with disc brakes, Ø 430 mm, offset approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle tires Tires: 6x 385/65 R 22.5 UNIROYAL TH 50. Chassis components Kingpin supports (manufacturer of choice from Kögel), mechanically operated with leveling support, lifting capacity approx. 24 tons. One-sided operation on the right side when traveling. Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for a three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with spray flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with spray flaps behind the axles. Toolbox for storing: 10 side panels, folding stanchions, and rear door or rear flap. Fully enclosed, protected against spray, and also serves as a side protection device. Ground clearance (front): 220 mm. 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Installation at the rear, 1x on the left and 1x on the right. High, rigid underrun protection at the rear made of steel according to ECE-R58. 1 pair of retractable warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection. Arrangement in the front and rear areas of the vehicle. Brake/air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection lines), parking brake as a spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection. WABCO EBS system. Air suspension system incl. 1 lifting and lowering valve, mounted on the left side behind the axle unit when traveling. Driving position is automatically adjusted. 2 tamper-proof coupling heads in the front ISO 1728 34410.010. Air reservoir for brake system and air supply made of steel (EN 286-2). Floor Plate floor approx. 30 mm thick. Floor sealed around the perimeter. Pocket for square tube inserts, approx. 80 x 80 mm, arrangement according to drawing J9: 8 pieces of pocket strips (18 pockets per strip: 4 pieces each on the outside + 10 pieces in the middle). Superstructure Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg. Front wall Storage for max. 14 square tube inserts, approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall. Rodpezth E Eefx Al Uocf Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front panel according to EN 12640. Rear wall Foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tensioners and T-latch locks, 2 foldable steps on the inside. Foldable steel corner posts at the rear at the height of the side panels. Side wall 4 pairs of folding stanchions at the height of the side panels, 43540.380 VarioFix steel hol

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Rcodporr Ammsfx Al Uef Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop

Condition: used, mileage: 109,275 km, power: 368 kW (500.34 HP), first registration: 05/2017, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 5,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 10,380 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Refrigerator - Air suspension - Hub reduction - PTO - Radio - Rearview camera - Disc brakes - Sun visor - Auxiliary heater - Toolbox = Notes = Crane: Fassi Type: F2150 RAL.2.28 Jib: L816L JDP Winch: max. 6420 kg Work basket Rear and front outriggers 4.75 m - 28,700 kg 7.10 m - 18,520 kg 12.10 m - 9,910 kg 14.65 m - 7,840 kg 17.20 m - 6,360 kg 19.70 m - 5,310 kg 22.10 m - 4,630 kg 24.50 m - 4,100 kg Jib: 27.10 m: 2,350 kg 28.45 m - 1,700 kg 30.75 m - 1,500 kg 32.95 m - 1,320 kg 35.10 m - 1,200 kg 37.15 m - 1,100 kg 39.05 m - 1,030 kg 41.00 m - 970 kg = Further Information = Technical Information Rodpfezqyt Aex Al Uecf Number of cylinders: 5 Axle Configuration Brakes: Disc brakes Front Axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 90%; Tire tread right: 90%; Suspension: Leaf spring suspension Front Axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 90%; Tire tread right: 90%; Suspension: Leaf spring suspension Rear Axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread left (inner): 75%; Tire tread left (outer): 75%; Tire tread right (inner): 75%; Tire tread right (outer): 75%; Suspension: Air suspension Rear Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread left (inner): 75%; Tire tread left (outer): 75%; Tire tread right (inner): 75%; Tire tread right (outer): 75%; Suspension: Air suspension Weights Unladen weight: 39,535 kg Payload: 465 kg GVW: 40,000 kg Functional Crane: Fassi Financial Information Price: Upon request Identification Model number: FH 500 8x4 / FASSI F2150 / WINCH = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, mileage: 107,500 km, power: 78 kW (106.05 HP), first registration: 10/1999, fuel type: diesel, overall weight: 4,800 kg, color: orange, gearing type: mechanical, number of seats: 2, total length: 5,950 mm, total width: 1,700 mm, total height: 3,280 mm, Equipment: all wheel drive, Multicar M26.4 with Blumenbecker Hubmeister 16 on KWS system Rodpfx Ajzvtt Hsl Uocf * 2.8L 78kW / 106 hp Iveco engine * Long wheelbase * Switchable all-wheel drive * 5-speed manual transmission with crawler gear * Hydraulic system 02 * Weight increase package 4800kg * Power steering * Blumenbecker Hubmeister 16 platform * Working height 14m * Lateral working range 8m * Rated voltage for which the platform is insulated: 1000 volts * Interchangeable platform, ball-and-socket quick-change system KWS * New TÜV/emission test * New inspection service * Sale according to § 25A. No VAT charged. * Green license plate * The vehicle was last used by the Thuringian Forest Railway. * Inspection book, operating manual, etc. available. Errors and prior sale excepted.

Condition: used, Year of construction: 2026, total length: 11,660 mm, Telescopic work platforms Magni DTB28RT Drive Diesel Year built 2026 Work height (mm) 28,500 Rsdozrzzkspfx Al Uocf

Condition: used, Year of construction: 2022, total length: 10,130 mm, · Korbarm-Drehwinkel (oben / Boden) +70 ° / -63 ° · Drehung des Oberwagens 360 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Innerer Wenderadius 2 m · äußerer Wenderadius 4.40 m · Fahrgeschwindigkeit - Transportmodus: 4.90 km/h · Fahrgeschwindigkeit - Arbeitsmodus: 1 km/h · Steigfähigkeit: 40 % · Zulässige Neigung im Arbeitsmodus: 4 ° · Vollgummireifen aufvulkanisiert · Antriebsräder (vorne / hinten): 2 / 2 · Lenkräder (vorne / hinten): 2 / 2 · Gebremste Räder / Räder: 2 / 2 · Hersteller / Motor Modell: Yanmar - 3TNV88C-DMU · Motornorm: Stage V · Nennleistung Verbrennungsmotor / Leistung: 36.20 Hp / 27.50 kW · Bodendruck: 18.20 dan/cm2 Rcsdpezrp I Ssfx Al Ujf · Hydraulikdruck: 400 bar · Fassungsvermögen des Hydrauliktanks: 94 l · Fassungsvermögen des Kraftstofftanks: 72 l · Umgebungsgeräusch (LwA): < 106 dB

Condition: used, Year of construction: 2022, total length: 10,130 mm, · Korbarm-Drehwinkel (oben / Boden) +70 ° / -63 ° Rodpfx Aljzrp Irj Uscf · Drehung des Oberwagens 360 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Innerer Wenderadius 2 m · äußerer Wenderadius 4.40 m · Fahrgeschwindigkeit - Transportmodus: 4.90 km/h · Fahrgeschwindigkeit - Arbeitsmodus: 1 km/h · Steigfähigkeit: 40 % · Zulässige Neigung im Arbeitsmodus: 4 ° · Vollgummireifen aufvulkanisiert · Antriebsräder (vorne / hinten): 2 / 2 · Lenkräder (vorne / hinten): 2 / 2 · Gebremste Räder / Räder: 2 / 2 · Hersteller / Motor Modell: Yanmar - 3TNV88C-DMU · Motornorm: Stage V · Nennleistung Verbrennungsmotor / Leistung: 36.20 Hp / 27.50 kW · Bodendruck: 18.20 dan/cm2 · Hydraulikdruck: 400 bar · Fassungsvermögen des Hydrauliktanks: 94 l · Fassungsvermögen des Kraftstofftanks: 72 l · Umgebungsgeräusch (LwA): < 106 dB

Condition: used, Year of construction: 2022, total length: 9,800 mm, - Max. Arbeitshöhe 22,21 m - Max. Höhe Arbeitskorb 18,28 m - Gelenkpunkt 8,13 m - Max. Reichweite 10,69 m - Negative Höhe 1,263 m - Negative Reichweite 11,30 m - Max. Tragkraft 230 kg - Max. Steigfähigkeit (eingefahren) 30 % - Max. Neigung X -5° / Y -5° - Max. Windgeschwindigkeit 12,5 m/s - Wenderadius (außen) 2,57 m - Wenderadius (innen) 1,56 m - Drehbereich Oberwagen (endlos) 360° - Vertikale JIB-Drehung +70°/-60° - Breite Arbeitskorb 0,79 m - Länge Arbeitskorb 1,83 m - Drehung Arbeitskorb 180° (+/-90°) - Geschwindigkeit (eingefahren) 6,1 km/h - Geschwindigkeit (ausgefahren) 1,1 km/h - Reifen 315/55 D20 - Hydrauliköltank 67 l - Batterietyp Bleibatterie - Batteriekapazität 24x2 V/375 Ah - Ladegerät 48 V/60 A - Antrieb Hydrostatisch - Vordere Pendelachse für höhere Stabilität auf allen Untergründen - Selbstsperrdifferenzial - Steckdose am Arbeitskorb - Sicherer Betrieb bis 12,5 m/s Windgeschwindigkeit - Integrierte Diagnoseanzeige mit CAN-Bustechnik - Hoher Grad an Baugleichheit im Sortiment - Drehbereich 360° Redpfx Alozrp Ile Uecf - Allradantrieb - 4 Lenkräder - CAN-BUS - Große Öffnungsweite für einfachere Instandhaltung - Hupe - Betriebsstundenzähler - Proportionalsteuerung - Rundumleuchte - Non-Marking-Reifen - Elektrische Sicherheitspumpe - Not-Halt-Taste - Fahrsignal - Notabsenkung - Borddiagnose - Fahrbewegung zulässig bei maximaler Hubhöhe - Hydraulische Plattformdrehung

Condition: used, Year of construction: 2023, total length: 10,060 mm, · Korbarm-Drehwinkel (oben / Boden) +70 ° / -63 ° · Drehung des Oberwagens 360 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Innerer Wenderadius 2 m · äußerer Wenderadius 4.40 m · Fahrgeschwindigkeit - Transportmodus: 4.90 km/h · Fahrgeschwindigkeit - Arbeitsmodus: 1 km/h · Steigfähigkeit: 40 % · Zulässige Neigung im Arbeitsmodus: 4 ° · Vollgummireifen aufvulkanisiert · Antriebsräder (vorne / hinten): 2 / 2 · Lenkräder (vorne / hinten): 2 / 2 · Gebremste Räder / Räder: 2 / 2 · Hersteller / Motor Modell: Yanmar - 3TNV88C-DMU · Motornorm: Stage V · Nennleistung Verbrennungsmotor / Leistung: 36.20 Hp / 27.50 kW Rcodpfx Aezrp Ifol Usf · Bodendruck: 18.20 dan/cm2 · Hydraulikdruck: 400 bar · Fassungsvermögen des Hydrauliktanks: 94 l · Fassungsvermögen des Kraftstofftanks: 72 l · Umgebungsgeräusch (LwA): < 106 dB

Condition: used, Year of construction: 2022, total length: 10,130 mm, · Korbarm-Drehwinkel (oben / Boden) +70 ° / -63 ° · Drehung des Oberwagens 360 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Innerer Wenderadius 2 m · äußerer Wenderadius 4.40 m · Fahrgeschwindigkeit - Transportmodus: 4.90 km/h · Fahrgeschwindigkeit - Arbeitsmodus: 1 km/h · Steigfähigkeit: 40 % Rcjdozrp H Uspfx Al Usf · Zulässige Neigung im Arbeitsmodus: 4 ° · Vollgummireifen aufvulkanisiert · Antriebsräder (vorne / hinten): 2 / 2 · Lenkräder (vorne / hinten): 2 / 2 · Gebremste Räder / Räder: 2 / 2 · Hersteller / Motor Modell: Yanmar - 3TNV88C-DMU · Motornorm: Stage V · Nennleistung Verbrennungsmotor / Leistung: 36.20 Hp / 27.50 kW · Bodendruck: 18.20 dan/cm2 · Hydraulikdruck: 400 bar · Fassungsvermögen des Hydrauliktanks: 94 l · Fassungsvermögen des Kraftstofftanks: 72 l · Umgebungsgeräusch (LwA): < 106 dB

Condition: new, Year of construction: 2026, total length: 7,790 mm, Articulated telescopic work platform Rodpezrp Hhjfx Al Uocf Manitou 180 ATJ Drive Diesel Year built 2026 Work height (mm) 18,190

Condition: used, Year of construction: 2026, total length: 7,320 mm, Articulated telescopic work platform Rcodpfx Aloy Tp Nbj Uof Magni MHAB18RT Drive Diesel Year built 2026 Work height (mm) 18,110

Condition: good (used), Table press Storage number: Year of manufacture: 1986 Machine number: 599 Manufacturer: Robotron Dresden Press type: PETSe 0.5 Type: 2-column table press Table area: 280 x 280 mm Overhang: 55 mm Pressing force: 0.5 t Distance table – ram: 60 to 220 mm Stroke: approx. 10 to 20 mm Rcedpfx Aezvw R Asl Uof Column passage: 90 mm Dimensions: 340 x 500 x 600 mm Features: Single and continuous stroke, 2-hand operation Condition: good, ready for use Weight: 69 kg

Condition: used, mileage: 99,630 km, first registration: 11/2014, fuel type: diesel, color: white, gearing type: mechanical, Year of construction: 2014, Nissan Cabstar 32.12 NT400 with Topy 11 aerial work platform // 11 meters! ---- * Manufacturer: Nissan * Model: Cabstar NT400 32.12 * First registration: 11/2014 * Mileage: approx. 99,630 km * Diesel * French registration Superstructure: * Manufacturer: France Elevateur * Model: Topy 11 * Working height: approx. 11 meters * Platform height: approx. 9 meters * Operating hours: approx. 2,549 * Good condition * Video and further photos available upon request (WhatsApp Erik) * Price: 13,900 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted. Redpfjzt Ukbex Al Uocf

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Rcodpfozrq U Hsx Al Usf

Condition: good (used), Year of construction: 2005, operating hours: 5,075 h, fuel type: diesel, Genie Z45/25J Articulating Boom Lift / Working Platform, 16m working height, 4x4, Deutz Diesel, 2005 A video can be sent via WhatsApp. Rodpfx Alszqhnhe Uecf We have a continuous stock; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without obligation. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2014, operating hours: 5,770 h, fuel type: diesel, Genie S-65 telescopic boom lift, 4x4, DEUTZ diesel engine, 5770 hours, 21.8m working height, 2014. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Rjdpfx Alozqhnbs Uecf

Condition: good (used), Year of construction: 2011, operating hours: 967 h, fuel type: electric, Nifty HR12 NE Articulating Boom Lift 4x2 Electric, 2011, 12m Working Height Rcedpfx Alozqhlmj Uof A video can be sent via WhatsApp. Continuous stock available, see website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without warranties (see our general terms and conditions). You can arrange a viewing and/or test drive by appointment, with no obligation. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2012, operating hours: 185 h, fuel type: electric, Manitou 150 AETJ Compact Articulated Boom Lift / Work Platform 2012, 15.40m Working Height Video can be sent via Whatsapp. Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) You can make a viewing appointment and/or schedule a test drive without obligation. Please call in advance as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Rcsdezqhk Aepfx Al Uof 5391 LR Nuland

Condition: used, mileage: 83,928 km, first registration: 03/2017, fuel type: diesel, color: white, gearing type: mechanical, Year of construction: 2017, Nissan Cabstar 32.12 NT400 with Klubb K26 aerial work platform, 11.80 meters! ---- * Manufacturer: Nissan * Model: Cabstar NT400 32.12 * First registration: 03/2017 * Mileage: approx. 83,928 km * Diesel * French registration Superstructure: * Manufacturer: Klubb * Model: K26 * Working height: approx. 11.8 meters * Platform height: approx. 9.8 meters * Operating hours: approx. 1,745 * Good condition * Video and additional photos available upon request (WhatsApp Erik) Redpfxozt Et To Al Uscf * Price: 14,900 Euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information without guarantee, errors and prior sale excepted.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,180 h, load capacity: 230 kg, lifting height: 25,000 mm, empty load weight: 2,950 kg, transport length: 4,900 mm, transport width: 800 mm, transport height: 1,980 mm, Cela tracked platform DT25 Spyder Working height 25.00 m Reach approx. 11.8 m Weight 2950 kg Drive: Diesel and 230 V Rjdpfx Alsyha Rks Uscf Brushes on all telescopes Special plastic support plates Crane hook, completely new, never used Additional set of white tracks Good, well-maintained condition New transport trailer available