Used Wood From 1401 Edges Anleimen Machine for sale (82,095)

Condition: new, DEMONSTRATION MACHINE For sale is an as-new JET Oscillating Edge Sander OES-80CS featuring a 400V motor / 2,800 watts and a belt speed of 17 m/s. The demonstration machine is in its original condition, so you receive the full warranty. Technical Data - Motor: 400 V / 2,800 watts - Belt speed: 17 m/s - Belt dimensions: 150 x 2,260 mm - Belt inclination: 90° – 180° - Belt table dimensions: 810 x 180 mm - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Gods Ahw Hajpfx Aikobw Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Gjdpfx Aszuyplsikjbw Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1993, Edge sanding machine Arminius SP31 Gbjdpfx Aor Nbktoikow In very good condition.

Condition: new, Year of construction: 2025, • 3kW electric motor Gbsdpozqzuhefx Aiksw • infeed and outfeed table • milling head with adjustable tilt angle up to 270° and vertical travel of 500mm and horizontal travel of 350mm • safety clamp for the sliding table • spindle diameter, standard: 30mm • max. tool diameter: 200mm • max. tool height: 130mm • guide length: 152mm • sliding table length: 1100mm • sliding table width: 350mm • overall table width: 750mm

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Sanding belt oscillation Gedpfexr Dflsx Aiksbw

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device Gbodjzuzb Aepfx Aikjw - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-milling cutter 10 face milling operations 4 chamfering operations 2 water break grooves Calibration support Belt feed direction from left to right Deburring cutter Gsdpfx Aijzpy Drokjbw Unit for water break grooves from above and below Can grind 9 profiles – e.g., bullnose, full round, half round, small rounding on the top and bottom, chamfered, quarter round.

Condition: ready for operation (used), maximum belt width 240mm mechanical oscillation Gbedpfozhuv Hsx Aiksw unit spacing 200-1290mm screw-type belt tensioning star/delta starter manual adjustment of unit spacing cast iron housing dimensions of the side table 920x350mm two 7.5kW motors

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Godjyffxzopfx Aiksbw Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: used, Used Machine Year of manufacture: 1988 Features and technical specifications: - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm Gbsdpfezk Ny Eex Aikow - Tilt adjustment of the work tables: 0–30 degrees - Operating pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: available shortly Location: Röllbach

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Gbsdpozbyt Esfx Aikjw Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg Gedpfszq Dczjx Aikebw

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request Gbodpfeb Evnkox Aikjw

Condition: good (used), Year of construction: 2022, 0,4 - 3 mm Gjdpfo Ai Ufgsx Aikobw Workingpiece thickness from to 10 - 45 mm Total length ca. 2.800 mm Feed speed 8 m/min. total power requirement ca. 7,1 kw

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Gedpfxsl D Rx Uo Aikebw Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg Gbjdpshqb Rcofx Aiksw - immediately available -

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 Gbodpe Ab Uzaefx Aiksw • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing.

Condition: new, Year of construction: 2022, Motor 2.2 kW (3 hp), Sanding belt 2280 x 150 mm, Gedpfjffyc Nox Aikjbw Swiveling edge sanding unit, Motorized belt oscillation, Support table at the idler pulley, Pneumatic belt tensioning, Table size 700 x 350 mm, Working surface 1000 x 150 mm, Belt speed 22 m/s, Roller diameter 140 / 80 mm, Dust extraction port D = 100 mm Ex works, from stock in Seevetal, subject to prior sale.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Gsdpfxewlbxlo Aikjbw Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), maximum belt width 240 mm mechanical oscillation cast iron housing dimensions of the side table: 800x450 mm two motors, 4.5 kW each manual adjustment of the unit spacing Gjdozmwddjpfx Aikjbw

Condition: excellent (used), SCM internships in excellent condition Gbjdpfet Hkq Rjx Aikjw

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² Gbsdpfx Aez Slnhsiksw The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors Gbedpfx Asztbutoikjw - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank Godpfxszuyp Ee Aiksbw - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: excellent (used), functionality: fully functional, grinding capability on the inside or on a flat surface mechanical oscillation adjustable feed speed via a variator electric adjustment of the upper/lower grinding unit grinding belt height: 150 mm table angle adjustment capability to grind curved parts total motor power: 5.7 kW 1994 power supply: 380V Two belt speeds Diameter of the roller for curves: 40 mm Conveyor with pressure roller at the inside Brushing unit with angle adjustment Frame support Mobile construction CE marking External dimensions: 2300x1200x1600 Gsdsy N Ry Hspfx Aiksbw