Used Wood Drying for sale (9,000)

Year of construction: 2017, condition: refurbished (used), ROLL CONTAINER, ROLLING CART, 3-sided, FIREWOOD, 155 cm 1 ROLLING CART, 810 x 720 mm Height approx. 155 cm Art. No. RW-3155 / 3-sided Gsdped Syhgofx Aivobu other models are for comparison only we produce CUSTOM SIZES, repair roll containers / rolling carts. Please inquire about specific heights. Side mesh in blue, back panel in blue, Rolling base in various colors ideally used as: Firewood cart; for yellow sacks; standard boxes such as E2 boxes, etc. with dimensions of 60 x 40 cm; transport cart, storage cart; shelving; etc. per roll container: Rolling base with 4 wheels, including 2 fixed and 2 swivel wheels; Rolling base / rolling plate in various colors; 2 side meshes, 100% in good condition + back panel incl. 4 connecting clamps & screws Weight: approx. 27 kg/rolling cart This offer includes only the roll container with a height of 155 cm. Other rolling carts are not included in the offer (for inspiration only). Price per piece: €69.00 plus the currently applicable value-added tax. Price applies per piece for an order of 1 roll container. Inspection possible by telephone appointment. Item is in good optical and technical condition (general overhaul). Extremely stable & can support up to 500 kg. PICKUP is possible after notification from WAREHOUSE 47441 MOERS. (Due to large stock levels, the goods can be inspected on site.) Due to time constraints, questions about this item can only be answered if you provide your telephone number. If you would like shipping, please contact us before purchasing to discuss shipping costs. Photos are similar.

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Gbodpfxod I T Exj Aivsu

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Gbodpfx Aijtu H Eijvou Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. Gbodotz H Egspfx Aivju * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Very good condition, available immediately. Gedpfst S Efgox Aivjbu

Condition: used, Wood chipper Bruks 1500M IDC000079 - Manufacturer: Bruks - Chip screen: BS2 - Scraper conveyor - Belt conveyor Gbedpfxet D Dhde Aivou - Cyclone - capacity: 50 m3/h

Condition: good (used), wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: Ø 160 mm -Hole: Ø 60 mm, bolt circle Ø 85 x 9 mm -Number: 2x cutters available -Price: per piece -Dimensions: Ø 160 x 40 mm Godpfx Aisvx Rfvjvsbu -Weight: 3.6 kg/piece

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine - Gbodpfx Aeu R Sxxjivsu

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Crusher manufactured by the German company WEIMA – after technical inspection – year of manufacture 1992 – documentation TECHNICAL SPECIFICATIONS: hopper dimensions 800 x 1000 mm rotor diameter 315 mm rotor length 800 mm rotor speed 90 rpm Gsdpfeuditwsx Aivjbu main motor 22 kW number of knives 19 pcs rotating cutting knives 30 mm x 30 mm screen size φ 20 mm and 15 mm AUTO-REVERSE HYDRAULIC CHUTE height of the clamping chute 275 mm nozzle diameter φ 200 mm machine dimensions (length/width/height) 210 / 160 / 180 cm weight 1600 kg

Year of construction: 2022, operating hours: 6 h, condition: like new (used), functionality: fully functional, 3 pieces of nearly new PROLAIN dryers, each approx. 170 m³. Further technical data available on request. Sale on behalf of customer. Gbsdpfx Aijxcifrovou

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner Gbedpfx Aioxcybksvou - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: used, Year of construction: 1986, functionality: fully functional, Dry-ball mill – including new electric motor Gbsdpfoxixiyex Aivou

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm - without electric motor Godpfevzw Tfsx Aivobu

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Godsxp H S Ajpfx Aivebu

Condition: excellent (used), Year of construction: 2018, operating hours: 4,351 h, functionality: fully functional, machine/vehicle number: W09812219J2D38029, first registration: 10/2018, overall weight: 19,000 kg, color: orange, axle configuration: 2 axles, operation weight: 18,760 kg, empty load weight: 18,760 kg, tire size: 600/50 R22.5 166F, next inspection (TÜV): 01/2026, maximum speed: 80 km/h, drive type: Zapfwelle, number of previous owners: 1, load hours: 4,351 h, crane manufacturer: Palfinger, Equipment: ABS, additional headlights, chaff cutter, compressed air brake, crane, front power take-off, lighting, power take-off driven, trailer coupling, Fully developed hydraulic counter-cutter, developed together with Doppstadt on the vehicle and fully operational! Spare parts supply is ensured by Doppstadt as well as TCS Umwelttechnik GmbH, Austria. Gbedpfxoxqgm Ns Aivsu - 2-axle trailer - Length: 6,360 mm / Width: 5,039 mm / Height: 5,834 mm - Transport width: 2,539 mm / Transport height: 3,929 mm / Transport length: 6,414 mm - Required power: 250 – 370 kW - Chipping drum: 6 knives - Hardwood trunks up to Ø 480 mm, softwood trunks up to Ø 600 mm - Feed height: 950 mm / Feed width: 1,200 mm - Rotor diameter: 1,000 mm / Rotor width: 1,200 mm / Loading height: approx. 1,400 mm / Infeed width: approx. 2,000 mm - Variable feed speed / closed and robust chipping drum / simple design and maintenance - Variable knife protrusion and easy screen basket change for high-quality wood chips from P16 to P100 (G30 – G100)

Condition: used, Year of construction: 2006, Bruks drum chipper Gbodpoxr Trnefx Aiveu Model 820CM Year of manufacture: 2006

Year of construction: 1981, condition: ready for operation (used), diameter 800 mm roll surface width 1800 mm heating system Sattdampf 0 0 860 Liter 0 5 bar max. temperature 168 ° C range L-W-H 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, Gjdpfxow Tm Tie Aivsbu steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works.

Condition: new, A device for storing and feeding logs onto a sawmill table. The systematic material feed to the saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm (longer option) Log length: 1000–2500 mm Log diameter: 100–400 mm Feed speed: adjusted to the incoming feeder LOG FEEDING Gbodpfx Ajwavrcsivsu A device for storing and feeding logs onto the table of a gang saw. The targeted material feed to the gang saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800-2000 mm Height: 800 mm Length: 4000-12000 mm Log length: 1000-2500 mm Log diameter: 100-400 mm Feed speed: Adapted to the feed rate

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Year of manufacture: 2023 Godjv Sqrpopfx Aivebu Infeed opening 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 phase Blades: multiple-rotation hydraulically actuated slide Screen size selectable (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idling - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional shredder options: - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,400 h, functionality: fully functional, Wood chipper DH600-18.5KW, rotor width 600mm, rotor diameter 222mm, 28 blades, concave, 4 brush cutters, hydraulic pusher, built in 2020, completely factory overhauled Gbjdpfsv Iq Ebox Aivou

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Ultimate pressure: approx. 200 mbar (abs.) Gsdpfev I Agdox Aivebu Accessories: Intake filter; Operating instructions Delivery time: Short term

Condition: used, Year of construction: 2013, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Godpfx Asvwfhioivjbu

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Gsdpfxeu Dnrue Aivobu Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical specifications: Operating voltage: 400V AC, 3PH/PE Frequency: 50Hz Connected load: 110kVA Main supply fuse: 200A Production capacity: depending on material to be processed, 20m/min / 6" core up to max. 830mm diameter / up to 1.4t Degree of automation: fully automatic Installation dimensions: 5.2x3.7x3.2m (LxWxH) Gbsdexzuc Hjpfx Aivou

Condition: used, Heavy-duty wood lathe with hand copy attachment, sold by private owner with extensive accessories, fully equipped, some items in original packaging. Used, excellent condition, low operating hours. Make: Flott-Arnz. Centre distance approx. 1200 mm, centre height approx. 250 mm. Hand copying device with approx. 1000 mm copy length. Four-prong drive centre, live centre included. 5 spindle speeds: 500 - 2500 rpm. Location: 97447 Gerolzhofen, loaded on truck, unpacked. Sale as inspected, in current condition, without any warranty or guarantee. Gbsdpfx Aioyb S Hkeveu