Used Wood Drying for sale (17,782)

Condition: used, WORK TO BE REPRODUCED ON THE SCOLPITRICE TYPE T4: 2 left-hand pieces, 2 right-hand pieces, Spindle center distance: 220 mm, Bwsdpextqpmjfx Adxjw Maximum working length: 1250 mm.

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods! Bwodpfsh Tyrwex Adxsw

Condition: like new (used), Year of construction: 2020, Hebrock drying box for edge banding machine Year 2020 Top condition - as new Bodpfowqx Emex Adxoww Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, Slow-running machine with walking floor. Rotor width 63 cm with 17 knives. 18.5 kW motor. Only 2500 operating hours. Bsdpexryf Ijfx Adxoww

Year of construction: 2003, condition: used, Ser.-No. 300424, comprised of: Glass panel size approx. 700 x 500 x 800 mm, H 1,800 mm, thickness 1.2 to 6.0 mm, maximum panel size 2,700 x 1,800 mm, thickness 2.0 to 8.0 mm, side conveyor roller track, roller spacing approx. 220 mm, transport speed 1.5 to 6 m/min. Infeed/Park Position 1, L approx. 2,850 mm, pre-wash zone with rinsing, brush unit, intermediate drying, soaking spray zones, 2nd wash zone soak area, 3rd intermediate drying (2 units), 1/4 wash zones 1 to 4, final cleaning/rinsing zone / park position 4, rinsing zone length approx. 3,000 mm, fully enclosed with removable panels, wash water storage tanks (tank 1, tank 2), wash water storage tanks (tank 3 to tank 8), dimensions: machine installation length approx. 25 m, outfeed approx. 6,000 mm, total height approx. 2,950 mm, compressed air approx. 6 bar, waste water return from tank 8 to on-site water treatment system, electrical installation. +++ Attention: This item is part of an online auction! +++ Bwjdpfx Ajwzu Ekodxsw

Condition: good (used), Tiflex Screen Exposure Unit and Drying Cabinet / 1 Drawer – Ref. 23L6080 Compact unit for exposing and drying screens. This equipment is suitable for any screen printing screen up to 60 x 80 cm. Good condition Bwedpfx Ajxryzpjdxsw Tested and checked, ready to use. TIFLEX BENCHTOP TESTING UNIT for exposing screens: For screens up to 60 x 80 cm 1 drying drawer Number of 40W fluorescent tubes: 8 Glass dimensions: 79.5 x 99.5 cm Overall dimensions: D x W x H: 87 x 133 x 54 cm Operating current: 12 A We deliver throughout Europe (shipping extra)

Year of construction: 2024, operating hours: 1,448 h, condition: ready for operation (used), Main Drive Bwodpfx Adoxqtc Rsxjw Number of axis 3 This 3-axis GEWEMA Axolox 4021 was manufactured in 2024, featuring a robust CNC Wood Router design. It includes a high-frequency spindle, vacuum table with adjustable sections, and a comprehensive control set with safety features. Ideal for intricate woodworking, it comes with a Mini PC, Beamicon22020 software, and additional licenses for enhanced functionality. If you are looking to get high-quality milling capabilities consider the GEWEMA Axolox 4021 machine we have for sale. Contact us for more information. Application Types Milling (Wood)

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Bwsdpjd I T Exjfx Adxjw

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Bwjdpeh Eiw Isfx Adxow Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: used, COMPLETE WORKSHOP IN EXISTING CONDITION DECHAU CHAMBON Planer CHAMBON Surface planer CHAMBON 2 spindle moulders CHAMBON with power feeder Chip conveyor Radial arm saw LYON FLEX Frame press UTIS Tenoner CONCEPT4 (saw, 2 feeders, spindle moulders) Bwodpsxpw Rpsfx Adxjw

Condition: used, Trolley 12 levels - year of construction unknown Bwedpfswbtvuex Adxsw - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: good (used), Spray booth, drying booth, paint spraying system Manufacturer: LUTRO Interior dimensions: LxWxH = approx. 750x500x400 cm Bolted steel frame construction with sandwich panels Room volume: approx. 150 m³ Two front extraction walls and supply air ceiling with 4 sections Each side fitted with 4 explosion-proof luminaires, each with 4 fluorescent tubes Front side fully openable with segment door Booth roof can be opened in the middle for entry with hall crane Two side entrance doors Complete with control cabinet, extraction motors, etc. Heating system to preheat supply air Airless spray unit 31125ä Bwsdpfx Asri I Nbjdxew

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Infeed length: 8270 mm / Max. timber length, infeed: 16000 mm / Max. timber length, outfeed: 12000 mm / Infeed cross conveyor, 5-strand, 2200 mm / Extendable timber support table / AQF strand with shaft extension, 2900 mm / Under-table pivoting crosscut saw /Straight safety guard flap / Waste disposal downwards / Control for waste disposal system / Universal milling unit, 5-axis with profile cutter / Dovetail cutter / Finger joint cutter / Combination support for vertically operating tools / Drilling unit, 3.0 kW / Finger cutter 1 / Combination support for horizontally operating tools / Slotting unit, 480 mm / Drilling unit 1, 2.2 kW / Drilling unit 2, 2.2 kW / Marking device, reference side / Marking device, operator side / Pneumatic beam turning station / 7-arm outfeed table/ Extension roller conveyor, 5300 mm This HUNDEGGER K2-5-450 was manufactured in 2005. A robust timber framing machine, it excels in cutting, milling, drilling, and slotting for timber construction. Features include an 8.27m infeed length, extendable timber support, and multiple drilling units. Ideal for precise wooden component processing. Contact us for more information about this machine. Bjdpfoxqtdbox Adxjww Application Types Milling (Wood)

Condition: new, Year of construction: 2023, Infrared Dryer IR-TEX MINI, 700mm Belt width: 700mm, spot width: 500mm, cover length: 1m, total length: 1.8m, heating: 4 kW, connection: 400V, 50Hz Bwsdpfeh Tyw Aex Adxsw Infrared drying channel for textiles with ceramic spots, Teflon-coated belt, electronic conveyor control, heating variable via Digi-Thermo, suitable for a small number of items, compact construction, insulated cover.

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. Bodpfxjh Hnp De Adxoww fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Year of construction: 2025, condition: new, Drying container WISSMATEC Drying floor Hydraulic moving floor Year of manufacture 2025 Bjdpjxd Uznsfx Adxsww Optional: - Discharge and dosing screw conveyor - Rotary valve - Hydraulic lid - Manual lid - Cyclone - Ventilation system

Year of construction: 2014, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19994 Specifications: Bwedpfxsv U Tmnj Adxew - 2014 model - 47m3 - Total weight: 20 T - Container weight: 2272 kg - Ready for delivery Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Year of construction: 2018, condition: ready for operation (used), This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. Equipped with a HSK-F63 tool holder system, 12-position disc-type tool changer, and a BIESSE BH 10 drilling unit with comprehensive vertical and horizontal drilling capabilities. It also includes a grid vacuum table, dual 500 m³/h vacuum pumps, and is DXF file compatible. Contact us for more information about this machine. Application Types Bsdpfx Adsxtq Ucsxoww CNC Wood Machining

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Bsdpfx Ajh Tymrsdxsww Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place.

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Bwodpspdqzxjfx Adxjw Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2015, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19995 Specifications: - 2015 model - 47m3 - Total weight: 20 T - Container weight: 2260 kg - Ready for delivery Bodpfx Adov U Syasxoww   Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Year of construction: 2011, condition: ready for operation (used), Main Drive Bodpfxsxp Sn Ns Adxoww Spindle speed range 2800 This NESTRO NE 300 PU Jet was manufactured in 2011. A robust used extraction system featuring a 7.5 kW motor, 2800 rpm rated speed, and a substantial filter area of 33.25 m². It efficiently handles up to 5083 m³/h. Includes a rotary valve and comprehensive delivery scope with dust extractor and silo dimensions provided. Ideal for enhancing your woodworking operations. Contact us for more information about this machine. Application Types Other Woodworking Machinery

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement - Bsdpeutmw Hofx Adxoww

Year of construction: 2007, condition: ready for operation (used), This wood mill was manufactured in 2007. It features a comprehensive window production line including a Weinig UC Matric and a Biesse WinLine One, capable of operating independently. The setup includes multiple spindles for diverse machining operations, a cross-cut saw, drilling, and trimming units. Ideal for businesses looking to enhance their window manufacturing capabilities. Contact us for more information about this machine. Bwedpfxsxp Srbo Adxew Application Types Milling (Wood)

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Type: WL 600 Shaft diameter (mm): 260 Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Weight (kg): 1,100 Bwjdpoxiq Syefx Adxew Location: ex-stock 54634 Bitburg - available immediately - Subject to prior sale