Used Wolfcraft Cross Table for sale (19,478)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Lodpfjy S Ru Ajx An Uoab Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, band length ca. 1.700 mm + 2.700 mm cutting width max. 2.500 mm Ljdpfx Aov Hgb Nsn Ujab Cutting height max. ca. 80 mm

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technische Details Werkstückdurchmesser 1000 mm Werkstückgewicht - kg Werkstückhöhe - mm Steuerung Schleifspindelmotor 11 kW Gesamtleistungsbedarf 25 kW Maschinengewicht ca. 6500 kg Raumbedarf ca. 4100 x 3200 x 2600 mm Zusatzinformationen Maschine kommt aus einer Betriebsschließung Ljdpfx Aoy Tlrren Usab Ausstattung: Kühlmitteleinrichtung 500 Liter mit Papierbandfilter 4 Stück Schleifscheiben (3 Stück unbenutzt) Technische Daten: Rundtischdurchmesser 800 mm Max. Abstand Rundtisch zu Schleifspindelmitte 850 mm Schleifscheibendurchmesser 400 mm Schleifscheibenbreite 80 mm

Condition: used, Year of construction: 1994, total length: 3,400 mm, total width: 2,000 mm, total height: 1,500 mm, Colour: Grey Weight: 1.200 kg - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No Ljdpey Smc Asfx An Ujab - Serial number: 94-11-240 - Main motor power [kW]: 5.5 - Roller table length [mm]: 3200 - Table width [mm]: 1450 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Electrically adjustable axes: Scoring unit height - Manually adjustable axes: Tiltable, Cutting height - Options: Digital readout, Scoring unit - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 44.8 - Voltage [V]: 415 - Current consumption [A]: 13.5 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 3400mm x 2000mm x 1500mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, ZEATZ NC rotary tables, PHV series – available for short-term delivery The ZEATZ NC rotary tables of the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: ✔ Integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service & technical support directly from JMT ✔ Individual designs and customer-specific solutions ✔ High load capacity for heavy workpieces Why ZEATZ: ZEATZ represents innovative NC rotary table solutions with the highest precision and reliability. Thanks to their robust design, backlash-free drive systems, and state-of-the-art control technology, these rotary tables are ideally suited for demanding machining processes. Technical features: Working position: Vertical / Horizontal Applications: Precise positioning, stepless rotation, and interpolating machining in a single setup Sizes: Table diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional, also with square clamping surfaces) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3" Integration: Compatible with HEIDENHAIN and SIEMENS controls Your advantages as a JMT customer: ✔ Official distribution partner for ZEATZ in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Support with integration and commissioning Lajdpjm Tvz Dofx An Ueb ✔ Reference projects available in Germany Contact us – we will be happy to advise you and create a customized offer.

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Lajdpeyzyrvjfx An Usb Total number of tool changer positions: 22

Condition: good (used), Year of construction: 1995, Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling Lajdpsy Tax Hjfx An Uob -Manufacturer: NIKKEN Rotary table with drive -Type: CNC-100 -Recording: SK40 -Clamping: pneumatic -Control: Z3BF UNIT -Tailstock: 2 pieces type P-105 -Dimensions of transport trolley: 600/940/H720 mm -Weight: 119 kg

Condition: used, Year of construction: 2001, total height: 1,600 mm, total length: 1,300 mm, total width: 1,350 mm, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 24.095.2 - Transport dimensions: 1300mm x 1350mm x 1600mm (l x w x h) Ljdpewnilrjfx An Ueab Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, functionality: fully functional, We are offering this used WEINIG Dimter OPTICUT S75-4 cross-cut saw line optimization system, manufactured in 2004, for sale. Manufacturer: WEINIG Dimter Lsdpoy S T Uxefx An Ujab Model: OPTICUT S75-4 Year of manufacture: 2004 Condition: used Category ID: 171 Type ID: 2446 Type: cross-cut saw line optimization system If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 140 kg, NEW price includes delivery in the Netherlands and Belgium! Semi-electric scissor pallet truck Brand: Total Source Year of manufacture: 2025 Ledpfx Ajy R Aghon Usab Capacity: 1,000 kg Lifts up to a height of 800 mm Manual drive Electric lifting Equipped with a 12V battery Built-in charger

Condition: good (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 600 mm, fuel type: electric, empty load weight: 208 kg, Semi-electric scissor pallet truck Brand: JUNGHEINRICH Year of construction: 2018 Capacity: 1,000 kg Lifting height: up to 800 mm Manual travel Electric lifting Equipped with a 12V battery Internal charger Fork dimensions: 560 x 1150 mm Ledpfx Ansy R Abre Ueab

Condition: new, Year of construction: 2026, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Manufacturer: GERD WOLFF Website: Technical Details: • Length 1000 mm • Width 1000 mm • Height 200 mm • Weight 300 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: Lajdey S D Naspfx An Usb • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, table length 1220 mm Ledpfjxqrhlox An Usab table width 760 mm table height 910 mm weight 226 kg

Condition: used, centre height / mm weight 160 kg diameter 500 mm Laedjy S Dylopfx An Ueb

Condition: used, surface area 850x850x80 mm no. of flutes / groove width / mm weight of the machine ca. 870 kg Lsdpfx Asy S Dnisn Ueab LxWxD: 850x850x80 mm Weight: 870 kg

Condition: excellent (used), functionality: fully functional, empty load weight: 240 kg, load capacity: 1,000 kg, total length: 1,450 mm, total width: 1,085 mm, EdmoLift CUB1000 Scissor Lift Platform in very good, used condition. Lsdsy Iyy Hjpfx An Ujab £3000 each new on Edmolift webstie (including VAT) We have qty 2 available and would be willing to negotiate a price for both units.

Condition: good (used), functionality: fully functional, 1 x Poly-top rotary packing table / Lazy Susan on height-adjustable feet. Lsdpoy Hiy Hsfx An Usab Diameter - 1.2m. Speed - fixed. Power - 3 phase.

Condition: new, Year of construction: 2022, A mid range, industrial level sliding table panel saw for cutting sheet material or timber. Standard features include electric rise / fall / tilt of the saw group, table locking in any position and quick angle setting of the cross cut fence. Specification : Ex College A1 Condition - Unused Worktable dimensions 1000X560 mm Sliding table dimensions 3200X350 mm Max squaring capacity with scorer 3350 mm Cutting width max - blade to rip fence 1300 mm - manually adjusted - scale / pointer Tilting blade 0.45 degrees Max cutting height with blade at 90° d.350 mm 118 mm Max cutting height with blade at 45° (d.350 mm) 81 mm Max sawblade dia and bore size 350/30 mm Saw rotation speeds 3000/4600 RPM Laodpfx Aey Efz Ron Usb Dust extraction outlet on machine base d.100 mm Main sawblade motor 4kW (5.5HP) 50Hz Scoring motor 0.55kW (0.75HP) Max squaring with stops 3600 mm STANDARD EQUIPMENT: Carriage in anodised aluminium alloy sliding on high precision adjustable guides in hardened and ground steel Mitre gauge on sliding table 90° quick locking and single degree tilting scale plus reference at 10, 15, 22.5, 30 and, 45 degrees. Quick fence positioning at 90° 10° 15° 22.5° 30° 45° keeping without change the stop position in reference to the blade position. Anodised aluminium profiles Table locking in any position Main saw blade speed change accessed through the table Sliding table with push handle Eccentric workpiece clamp Motorised blade rise / fall Motorised sawblade tilting with electronic read out Electrical safety micro switches on access door Overload switch protection Key locking master witch Emergency stop Electromagnetic main motor brake CE compliant overhead saw guard with extraction point Outfeed side extension table Complete with set of sawblades - 350dx30x3.2 Z60 and 120dx20x3.5 Z24

Condition: excellent (used), Table milling machine & Aigner table extension Ledoy Tt Uhepfx An Ueab - 30 mm spindle - Table dimensions: 1x1 m - Milling fence with fine adjustment - ELU infinitely variable feed unit

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. Laodpfsy Hq Dyjx An Ujb ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Lajdpfey H Dahox An Ueb Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1970, table load: 45,000 kg, table width: 2,100 mm, total length: 3,000 mm, Rotary table MITSUBISHI - DIT-A Mitsubishi Rotary table 3000 x 2100 x 45 T V-Axis 1500 mm MACH-ID 6015 Make: MITSUBISHI Type: DIT-A Year: 1970 Table Length: 3000mm Table Width: 2100mm Lajdpfjwvkczex An Ujb Table load: 45000 Movement V-axis: 1500mm Rotation B-Axis: 360.000° Rotation speed B-Axis:0,02 - 0,60Omw/min. Length: 0mm Width: 0mm Height: 0mm Weight: 0kg

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Ledpfemb Urdsx An Usab Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2020, table load: 7,000 kg, table width: 1,200 mm, total length: 1,200 mm,   Build with double hirth coupling T slot 22 with Jump off 200 mm Diameter off center hole 50 mm Table Length: 1200mm Table Width: 1200mm Lodowq Rmcopfx An Ueab Table load: 7000 Rotation B-Axis:1 or 5 Gr.° Length: 1200mm Width: 1200mm Height: 340mm Weight: 2000kg

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Lsdpfxeyu Nb Eo An Ueab Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg