Used Wire Stitching for sale (3,681)

Condition: excellent (used), Year of construction: 2025, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections Dksdpfx Ajxvh Huof Iew -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale weight: 700 kg, overall weight: 33,000 kg, oil tank capacity: 2,000 l, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 FU Dedpfx Aoxr N Tbjf Iokw Year of construction 2010 Operating hours approx. 40.000 hours, as of July 2025 Main press force 880 kN Specific pressing force 107 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 990 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 105 kW Total current consumption 200 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 500 up to 700 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 14,000 x 23,000 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2010 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 13,905 mm Length goose neck 3,732 mm Grade 30° Nominal width 1,800 mm Effecting width 1,641 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 12,200 x 3,000 x 1,500 (l x w x h) Scope of delivery: The conveyor belt (without steel podium and maintenance platform), baling press, bale chute and wire drawing stations are for sale, without wire. The plant will remain in operation until March 2026, when it will be replaced by a new press line. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, für Draht hydraulically tiltable ja 2 t Year unbekannt Hydraulik +++++ Please note: Dkodpfx Afoh Tafxe Iew The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Vihl Pedersen Rapid-D stitching machine for outer soles (up to 20mm thickness) Dodjxuiygepfx Af Ijkw

Condition: good (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece height (max.): 500 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, table width: 640 mm, table length: 840 mm, tank capacity: 980 l, Equipment: documentation/manual, Mitsubishi MVR2400, built in 09/2015, commissioned in 01/2016, stand elevation, cutting height 0-500mm, wire guide 0.25mm. The machine can be viewed in operation at the seller's premises. Test cuts are also possible. The machine is still in production. To be handed over by the operator. If you have any questions, please call: 02351-6767916 Dkodpfsvu Ai Sjx Af Iew

Condition: used, Year of construction: 2014, x-axis 550 mm y-axis 350 mm z-axis 400 mm U-axis 550 mm V-axis 350 mm volume 1200 L inclination +/-30°/400 mm dimensions 1200x700x400 mm weight 1500 kg wire dia. 0,10-0,33 mm Bobbin Weight max. 25 kg Working hours 39.000 h Cutting time 21.000 h Dsdexddtmjpfx Af Iekw

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 3,869 h, fuel type: electric, mast type: triplex, Manufacturer & Model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5389 Category: Used Mast Type: Triplex (3F) Lowered Height: 3830 mm Lifting Height: 9800 mm Capacity: 1200 kg Platform Height: 9000 mm Order Picking Height: 10600 mm Initial Lift: Yes Cabin Width: 1300 mm Year: 2020 Operating Hours: 3869 Battery Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! Dkjdpfoxryxbox Af Isw - PSA - Blue Spot - Adjustable Forks! - Induction / Wire Guidance

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Dsdpexrta Eofx Af Iekw Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1979, weight 200 kg Djdpfx Ajvu Hldjf Ijkw 931855500

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,883 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5388 Category: Used Mast: 3F Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1,200 kg Platform height: 9,000 mm Picking height: 10,600 mm Initial lift: Yes Cabin width: 1,300 mm Year: 2020 Operating hours: 4,883 hrs Dkedpfx Ajxrywdsf Ijw Battery: 48 V / 620 Ah Options: FULL options !! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION !! – PSA – Blue spot – Adjustable forks – Induction / wire guidance

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Dodpfx Afoxpxhvs Iokw Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1974, wire dia. 5 - 17 mm wire length max. 5.000 mm straightening feed stufenlos bis ca. 60 m/min 11 kW, 380 V, 50 Hz 45 kW, 1480 U/min; 380 V, 50 Hz total wight ca. 15 t +++++ Dodohtbfijpfx Af Iskw Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,672 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Dodsxryvajpfx Af Iekw Mast: Z + i - 3F9800 ID: 25114.5387 Category: Used Mast: Triplex (3F) Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Init.: Yes Cabin width: 1300 mm Year: 2020 Operating hours: 4672 hours Capacity: 48 V / 620 Ah Options: - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable forks - Induction / Wire Guidance

Condition: used, Year of construction: 1989, serial number L169 output 6 kw ja seperat Dsdpfx Afevu Hl Re Iekw digital readout ja Wizard Puls50 Kühlwasseraufbereitungsei

Condition: like new (used), Year of construction: 2021, operating hours: 1,750 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID:25101.6260 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1750 hours Dksdpfxexrq Ums Af Iew Battery: 48 v / 750 ah Options: - VNA truck - With complete wire guidance, LIKE NEW

Condition: used, Year of construction: 1999, max 70 mm hydraulic ja Dkedpow Sygaefx Af Iow

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast:Z + i - 3F5550 ID:25064.5758 Cat.:UsedMast:3F Lowered height:2360 mm Lifting height:5550 mm Capacity:1000kg Platform height:4750 mm Picking height:6350 mm Init.:Yes Cabin width:1500 mm Year:2018 Hours:2441 hours Capacity:48v / 465ah Options:FULL options !!- Mast Triplex - FFL - DUAL controls!!!! - Adjustable Spoons! - 2 x Blue spot -PSA - High beam lights Dkjdpfxoxrp R Hj Af Isw - Induction / Wire GuidanceLIKE NEW !!!

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast:Z + i - 3F5550 ID:25064.5759 Cat.:Used Mast:3F Lowered height:2360 mm Lifting height:5550 mm Capacity:1000kg Platform height:4750 mm Picking height:6350 mm Init.:Yes Cabin width:1500 mm Year:2018 Hours:2482 hours Capacity:48v / 465ah Dsdpfxjxrp Rys Af Iokw Options:FULL options !!- Mast Triplex - FFL - DUAL controls!!!! - Adjustable Spoons! - 2 x Blue spot -PSA - High beam lights - Induction / Wire GuidanceLIKE NEW !!!

Condition: like new (used), Year of construction: 2016, load capacity: 1,200 kg, lifting height: 10,300 mm, construction height: 4,130 mm, operating hours: 2,495 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast:Z + i - 3F10300 ID: 25031.6914 Cat.:Used Mast:3F Lowered height:4130 mm Lifting height:10300 mm Capacity:1200kg Platform height:9500mm Picking height:11100 mm Init.:Yes Cabin width:1400 mm Dksdjxrp Hzjpfx Af Isw Year:2016 Hours:2495 hours Capacity:48 v / 620 ah - Bj 2020 Options:FULL options !!- Triplex mast - FFL - Dual controls - Induction / Wire Guidance

Condition: new, Year of construction: 2018, operating hours: 53 h, load capacity: 1,000 kg, lifting height: 5,250 mm, fuel type: electric, mast type: triplex, construction height: 2,560 mm, Manufacturer + model: JUNGHEINRICH EFX 410 Mast:X + i - 120 - 3F5250 ID:25041.0567 Cat.:Demo Mast:3F Forks:1200mm Lowered height:2560 mm Lifting height:5250 mm Dkedpfxsxrp E Rj Af Isw Capacity:1000kg Year:2018 Hours:53 hours Capacity:48v / 750ah Options:- VNA truck - with Wire Guidance - BLEU spot complete LIKE NEW!!!

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 9,300 mm, construction height: 4,650 mm, operating hours: 4,903 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast: Z + i - 2W8300 ID: 25023.7516 Cat.: Used Mast: 3 Lowered height: 4650 mm Lifting height: 8300 mm Capacity: 1200 kg Platform height: 7500 mm Picking height: 9100 mm Init: Yes Cabin width: 1200 mm Year: 2017 Hours: 4903 hours Capacity: 48 v / 620 ah Dkjdoxrp Edepfx Af Ijw Options: - PSA ( Sick ) - Induction / Wire Guidance LIKE new !!!

Condition: like new (used), Year of construction: 2017, load capacity: 1,250 kg, lifting height: 9,300 mm, construction height: 4,650 mm, operating hours: 4,723 h, fuel type: electric, mast type: duplex, Manufacturer + model:JUNGHEINRICH EKS 312 Mast:Z + i - 2W8300 ID:25013.7542 Cat.:Demo Mast:2W Lowered height:4650 mm Dkedpfx Afoxrp D Te Isw Lifting height:8300 mm Capacity:1200 kg Platform height:7500 mm Picking height:9100 mm Init.:Yes Cabin width:1200 mm Year:2017 Hours:4723 hours Capacity:48 v/ 620 ah - Bj 2015 Options:- PSA ( Sick ) - Induction / Wire GuidanceLIKE new !!!

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 7,950 mm, construction height: 3,400 mm, operating hours: 3,590 h, fuel type: electric, mast type: triplex, Manufacturer + model:LINDE V ( 5213 ) Mast:3F7950 ID:25013.1087 Cat.:Used Mast:3F Dkjdpfx Aoxrp Dasf Iew Lowered height:3400 mm Lifting height:7950 mm Capacity:1200 kg Platform height:7400 mm Picking height:9000 mm Init.:Yes Cabin width:1300 mm Year:2017 Hours:3590 hours Capacity:48 v / 620 ah Options:FULL options !!- Mast Triplex - FFL - DOUBLE steering !!!! - SAFETY doors with NEIG FUNCTION ! - Adjustable Spoons ! - 2 x Bleu spot - Induction / Wire Guidance - End of line sensor under batteryComplete LIKE NEW !!!

Condition: like new (used), Year of construction: 2017, operating hours: 4,764 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413X + i - 100 - 3F6000 ( = 600 DZ ) Djdsxrpy Ijpfx Af Ijkw ID:24096.5461 Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Hours:4764 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance

Condition: like new (used), Year of construction: 2017, operating hours: 4,602 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413 X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5462 Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Dksdpfx Afjxrpyuo Iow Capacity:1250 kg Year:2017 Hours:4602 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance