WIRE ELECTRO-EROSION
EXCETEK V1280/600

Name: EXCETEK V1280/600
Brand: EXCETEK
Availability: InStock

Year of construction

2018

Condition

Used

Location

Borgo San Dalmazzo Italy

Show map

Machine data

Machine type:: WIRE ELECTRO-EROSION

Manufacturer:: EXCETEK

Model:: V1280/600

Year of construction:: 2018

Condition:: like new (used)

Functionality:: fully functional

Price & Location

Location:: Via Vecchia Di Cuneo 51/A, 12011 Borgo San Dalmazzo, Italia

Call

Details about the offer

Listing ID:: A20523010

Update:: 13.11.2025

Description

Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm
Maximum workpiece weight: 4,000 kg
X and Y axis travel: 1,200 x 800 mm
U and V axis travel: 260 x 260 mm
Z axis travel: 600 mm
Permissible wire diameter: 0.2 – 0.3 mm
Simultaneous controllable axes: 4 (X, Y, U, V)
Motors: AC motors on all 5 axes
Maximum taper: 30° over 100 mm
Machine weight: 9,600 kg
Filtration system
Capacity: 3,000 L
Conductivity control: automatic
Resin capacity: 14 L
Temperature control: automatic
Dielectric cooling system: chiller
Generator
Power circuits: Mosfet AC
Minimum roughness: Ra 0.35
Cutting speed: 360 mm²/min (with 0.3 mm brass wire)
Automatic wire threading: standard
Power supply: 400V three-phase
CNC
Hardware: Industrial PC, 64 bit
Memory: 1 GB
Display: 15” TFT touchscreen
Data input: keyboard, RS 232, floppy, LAN, USB
Positioning system: closed-loop servo-assisted
Number of controlled axes: 5 (X, Y, U, V, Z)
Minimum programmable increment: 0.0001 mm
Machine equipped with:
• Optical scales on X and Y axes
• 600 mm Z axis
• Coil holder for up to 50 kg spools
• 1 set of 0.25 mm guides
• 1 set of 0.30 mm guides
• Taper cutting system
• Automatic wire threading and re-threading after breakage
• Clamping system: frame with universal drilling
• 64-bit CNC with 16 GB memory
• AC power generator with anti-electrolysis device
• Automatic technology generation
• Serial interface, floppy drive, LAN, USB
• Dielectric unit with automatic demineralization system
• Chiller
Pjdpfxjxwmacs Aa Ejrf
Year of manufacture: 2018

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

25 listings online

Call

Send inquiry

Telephone & Fax

+39 0171 ... show

These listings may also fit your interest.

Listing

Contamine-sur-Arve

1,321 km

Wire erosion
AGIECUT 20P

Call

Condition: used, TECHNICAL DETAILS - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART Podpfx Aouhq Rlja Esrf - Max. part dimensions : 900 x 680 x 250 [mm] - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 1266 [h] EQUIPMENT - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

See details

Listing

Screw Compressor CHICAGO PNEUMATIC CPVR15 + Lufttrockner

Ennepetal

1,084 km

Screw Compressor
CHICAGO PNEUMATICCPVR15 + Lufttrockner

Call

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Pedpfx Aash A Sfds Ejrf Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

See details

Listing

Coordinate measuring machine KEYENCE WM 3000

Mögglingen

1,367 km

Coordinate measuring machine
KEYENCEWM 3000

Call

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring machine Camera, hand probe with display Max. Measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated measuring probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories Prsdpfxju S Rnlj Aa Eef

See details

Listing

Vertical machining center MIKRON VCE 1000 pro

Root

1,371 km

Vertical machining center
MIKRONVCE 1000 pro

Call

Listing

Wire erosion machine (wire EDM) CHARMILLES Robofil 440

Bienne

1,301 km

Wire erosion machine (wire EDM)
CHARMILLESRobofil 440

Call

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Pedpfx Aaow Ucyuo Eerf Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

See details

Listing

Székesfehérvár

2,009 km

Machining center
MatsuuraLV-500

Call

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 Podpfxsvcfi Dj Aa Ejrf High speed and high accuracy option on Fanuc. The Machine can be inspected under power.

See details

Listing

Machining Center - Vertical Haas VF 3 YT/ 50

Bremen

1,133 km

Machining Center - Vertical
HaasVF 3 YT/ 50

Call

Condition: used, Year of construction: 2011, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW Prodpfx Aaewvl Apo Ejf tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter

See details

Listing

CNC Turning- and Milling Center WFL-MILLTURN M100 MILLTURN / 6500

Hilden

5,995 km

CNC Turning- and Milling Center
WFL-MILLTURNM100 MILLTURN / 6500

Call

Condition: used, Year of construction: 2010, longitudinal traverse (z-axis) 6870 mm cross movement. (x-axis) 920 mm centre distance 6500 mm swing diameter over slide rest 900 mm Control Siemens Sinumerik 840D tool taper CAPTO C8 7352 mm max. workpiece weight 9000 kg tools in tool magazin 72 total power requirement 145 kW weight of the machine ca. 47 t dimensions of the machine ca. 11 x 3,2 x 3,5 m Rotary spindle -Spindle diameter - 320 mm -Spindle bore - 245 mm Main drive: -Max. spindle speed - 1600 rpm -Max. torque at the spindle - 4472 Nm C-axis servo-controlled main spindle: -Max. speed - 20 rpm -Max. torque at the spindle - 3000 Nm -Holding torque of the disc brake - 6000 Nm Tailstock: -Quill diameter - 180 mm -Quill stroke - 200 mm -Quill force (adjustable) - 5400 to 40000 N Tool holder: -AC drive power - 30 kW -Max. spindle speed - 6000 rpm Psdpfx Aaoxzuvtj Esrf -Max. torque at the spindle - 315 Nm -Travel perpendicular to the X/Z plane (y-axis) - 500 mm [-200/+300]mm -Milling spindle diameter in the front bearing - 100 mm Equipment/accessories: -with internal coolant supply -chip conveyor -paper belt filter system -boring bar with device -measuring equipment -clamping sleeves -tool holders -spare parts -technical documentation

See details

Listing

5-axis milling machine RödersTec RXP500DSC

Soltau

1,205 km

5-axis milling machine
RödersTecRXP500DSC

Call

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Spindle / table distance: approx. 315mm - Linear direct drives in all axes - wear-free Specification: - Tool changer places: 19 - Cooling unit for drives, motors, spindle and cable cabinet - Measuring laser for the fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer Prodpfxett Argo Aa Eef - Minimal quantity lubrication - emulsion cooling - Spindle HSK40E with max. 42.000 rpm - Spindle compensation - Zero point clamping system Erowa integrated in the machine table - manual operating of chuck clamping - Automation package for retrofitting the machine with a pallet changer - Handbox The machine is overhauled in our house and is now in almost new condition. The machine can be inspected and tested under power after completion at our site. Please make an appointment with us!

See details

Listing

HSC - High speed milling machine Exeron HSC300/3

Dornhan

1,301 km

HSC - High speed milling machine
ExeronHSC300/3

Call

Condition: refurbished (used), Year of construction: 2007, operating hours: 11,200 h, machine/vehicle number: D300-373, travel distance X-axis: 550 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 350 mm, table width: 470 mm, table length: 400 mm, type of input current: three-phase, Equipment: documentation/manual, HSC300/3 (low hours) Complete overhaul of the entire system Technical data: Travel range XxYxZ 550x340x350 mm Clamping table/table to spindle nose 495 mm Overall dimensions WxDxH 2000x2350x2450 mm Rapid traverse 30 m/min Equipment: Color: light grey, partial respray in visible area CNC control Heidenhain iTNC530i electronic handwheel Direct measuring systems in all axes Milling spindle HVC140, milling power 10KW/13KW, HSK 40-E Spindle speed up to 42,000 rpm Tool diameters 0.02–16 mm Tool magazine for 40 tools HSC40-E Calibration arbor Calibration Blum laser for tool measurement Minimum quantity lubrication External cooling unit H.I.B Provision for dust extraction Dust extraction system Vario1 by Keller Transport Prsdpfx Aor Hb Hpja Ejf On-site commissioning Training at our premises/on site 6 months warranty

See details

Advertise here

WIRE ELECTRO-EROSIONEXCETEK V1280/600

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

WIRE ELECTRO-EROSION
EXCETEK V1280/600