Used Wire Flattening Mill for sale (3,476)

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Ltodpfx Aaextwddj Esa

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole. Lodpfowunmbjx Aa Eota

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Ledpfsmk S Sljx Aa Eeta Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 Ltodoq Rxz Topfx Aa Eja -Dimensions: 640/250/H390 mm -Weight: 57 kg

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, Ltjdpfxjf Nku Re Aa Eja wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg Ledpfxefcl H Uo Aa Eeta

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 Lodpsfcl H Iefx Aa Eota -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 26021.6261 Lodex Nzkcopfx Aa Ejta Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1657 hours Battery capacity: 48 V / 750 Ah Options: - VNA (Very Narrow Aisle) truck - with wire guidance Condition: Like new!!

Condition: excellent (used), Year of construction: 2001, Ref:11046 . 2001 JBI James Burn BB/43H Wire-O Closing Unit Double wire booklet binder Equipped with: Hand feed area with foot operated control Auto closing unit with 2 x closing tools Fully enclosed Perspex guarding Lsdpfxox Nfp No Aa Esta Hand feed & delivery table Specification: Product size, Max: 430 x 610 mm

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings - Documentation available: Yes - CE certificate present: No - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ltodpfx Ajx Igc Uea Esa Lukas van Rossum

Condition: new, The scope of delivery includes: 2.070x wire grating, new Material color: sendzimir galvanized load: 500 kg; with evenly distributed load execution: laid on Depth: approx. 1.100 mm ( direction of bearing bar ) Ltjdei Hkphjpfx Aa Eoa width: approx. 1.150 mm Mesh size: approx. 100 x 60 mm number of bars: 3 pcs. Weight: 5,00 kg | pcs.

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, Sodick AQ 300 L in good condition Operating hours: 16,906 Lodpjxpu I Esfx Aa Eeta Year of manufacture: 2007-11 Linear servo control X, Y, Z: 300 x 200 x 200 mm U, V: 80 mm Wire diameter: 0.15–0.3 mm (0.25 mm installed) Max. workpiece dimensions: 740 x 440 x 200 mm (X, Y, Z) Max. workpiece weight: 300 kg Chiller Deionization cartridge Complete documentation Machine is powered for inspection

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ Lsdpjx I Icvefx Aa Eota -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum temperature: 1300 °C Voltage / connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating power: 75 kW Heating zones: 5-sided (sides, bottom, door, optionally ceiling) Internal dimensions (firing chamber) Dimension / Value Width (w): 1,500 mm Depth (d): 1,000 mm Ltodew Ec Egepfx Aa Eoa Height (h): 1,720 mm Floor load: 10 kg/dm² Volume: approx. 2,580 litres External dimensions (overall unit) Dimension / Value Length (L): 2,000 mm Width (W): 2,250 mm Height (H): 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2007, Ref:11044 . 2007 Renz Autopunch AP 360 Ltedsx Nfppspfx Aa Eea Off line machine for spiral wire punching Equipped with: Punch sizes: 3:1" round & square hole + thumb cut / 2:1 round hole Jogger delivery Max. format: 360 x 360 x 2.5 mm

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 3,869 h, fuel type: electric, mast type: triplex, Manufacturer & Model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5389 Category: Used Mast Type: Triplex (3F) Lowered Height: 3830 mm Lifting Height: 9800 mm Capacity: 1200 kg Platform Height: 9000 mm Order Picking Height: 10600 mm Initial Lift: Yes Ltjdpjx Nzlgefx Aa Eja Cabin Width: 1300 mm Year: 2020 Operating Hours: 3869 Battery Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable Forks! - Induction / Wire Guidance

Condition: new, The scope of delivery includes: 01x wire grating, new Material color: sendzimir galvanized Execution: laid-on shelf grating, folded on both sides total depth: 1.112 mm clear span: 1.000 mm total width: 890 mm mesh size: 106 x 72.5 mm wire thickness: 3,8 mm Number of beams: 4 pcs. Unit weight: approx. 5.14 kg Technical data: Tested load capacity: 500 kg according to ANSI MH 26.2 Ltedpfx Aaeilk Ngo Eea for beam depth: 1.100 mm Assumed beam width: 50 mm Application for indoor use only Possibility of use: Shelf size/ modules required per shelf 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat resistant sheets: On request, we can offer you heat resistant sheets (see picture material) for sale; prices on request. Fire protection has special requirements. Therefore, the wire meshes can be provided with a welded-on heat shield. And should you need a push-through protection for cardboard boxes, the heat shield can also be made with a bend. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this article is subject to additional costs, which will be charged separately to the customer. depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch Ltedpfjx I H Rxjx Aa Eoa -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Condition: excellent (used), The scope of delivery includes: 01x lattice box, used Length: approx. 820 mm Depth: approx. 420 mm Lsdpfsmnnvaox Aa Eota Height: approx. 420 mm Material: steel Material color: galvanized Wire Ø: approx. 4.50 mm Mesh width: approx. 54 x 54 mm Stackable: yes Stacking edge: 30 x 18 mm (W x H) Inner height: front approx. 185 mm | rear: approx. 390 mm Weight / piece: approx. 15.74 kg Note: half open in width Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin Ledpfx Aox I E U Aja Eeta -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Condition: good (used), The scope of delivery includes: 106x wire gratings, new Material color: sendzimir galvanized load: 500 kg; with evenly distributed load execution: laid on Depth: approx. 1.100 mm ( bearing bar direction ) width: approx. 1.150 mm Mesh size: approx. 100 x 60 mm number of bars: 3 pcs. Lodpfxei Hkpds Aa Eota Weight: 5,00 kg | pcs.

Condition: good (used), MIG/MAG hose package for robot Ltedpofc T Tujfx Aa Eea -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg

Condition: new, The scope of delivery includes: 01x wire grating, new Material color: sendzimir galvanized Execution: laid-on shelf grating, folded on both sides total depth: 1.112 mm clear span: 1.000 mm total width: 890 mm mesh size: 106 x 53 mm wire thickness: 3,8 mm Number of beams: 7 pcs. Unit weight: approx. 7.53 kg Technical data: Tested load capacity: 1,000 kg according to ANSI MH 26.2 for beam depth: 1,100 mm Assumed crosshead width: 50 mm Application for indoor use only Possibility of use: Shelf size/ modules required per shelf 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat resistant sheets: On request, we can offer you heat resistant sheets (see picture material) for sale; prices on request. Fire protection has special requirements. Therefore, the wire meshes can be provided with a welded-on heat shield. Ljdpfx Aoilk Nrea Eeta And should you need a push-through protection for cardboard boxes, the heat shield can also be made with a bend. General information about the article: This item is offered for pickup only. Any further transport or shipment of this or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg Ltedpsx I Ef Isfx Aa Eja

Condition: new, The scope of delivery includes: 01x wire grating, new Material color: sendzimir galvanized Ljdpfx Aasi Hkpas Ejta load: 500 kg; with evenly distributed load execution: laid on Depth: approx. 1.100 mm ( bearing bar direction ) width: approx. 1.150 mm Mesh size: approx. 100 x 60 mm number of bars: 3 pcs. Weight: 5,00 kg | pcs.