Used Wire Flattening Mill for sale (12,564)

Condition: used, Year of construction: 2002, functionality: fully functional, CNC lathe Gildemeister Type: CTX 420 V6 Linear Year of manufacture: 2002 Serial number: 02260000631 Control system: Siemens PowerLine Technical data: Working area: Max. swing diameter over X-axis guide 680 mm Swing diameter over X-axis guide 565 mm Chuck diameter 200/250 mm Travel in Z-axis 260 mm Travel in X-axis 635 mm Spindle head: Spindle head (flat flange) 170 main spindle, 140 counter spindle Spindle diameter in the front bearing 120/90 mm Spindle bore 79/57 mm Main drive: Power of the AC main drive (100% duty cycle) 25 kW Torque max. 270 Speed range 25-5000 rpm Counter spindle Drive power AC 25 kW Torque max. 7000 Nm Speed range 35-7000 rpm Tool carrier Number of tool stations 12 Tool interface according to DIN 69880 Cylindrical shank diameter 40 mm Indexing time 30 ° 0.15 sec. Number of driven tools 5 Drive power 13.2 kW Torque 28 Nm Iisdpfxsz I T Avs Afujh Speed max. 4500 rpm C-axis, main spindle/counter spindle Speed range 0-250 rpm Torque 200/120 Nm Speed during point positioning 0.025 degrees Y-axis, vertical travel +/- 40 mm Hydraulics Capacity, total approx. 25 l Pressure max. 80 bar Pressure for clamping device max 70 bar

Condition: used, Year of construction: 2011, Control Heidenhain x-travel 600 mm y-travel 855 mm z-travel 750 mm tool taper HSK 63 number of tool places 40 Pos. auto power on hours ca. 48.312 h spindle hours ca. 25.603 h Iedpjz Hz Nzefx Afueih Condition: Used Technical features & accessories: - KNOLL 500K-1/10 chip conveyor (right-hand side) - BÄR TFK140 belt filter - ARO belt filter Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 50977, travel distance X-axis: 5,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 90,000 m/min, feed rate Y-axis: 90,000 m/min, total length: 9,600 mm, total width: 6,500 mm, spindle speed (max.): 16,000 rpm, total height: 5,600 mm, table load: 20,000 kg, torque: 160 Nm, rotational speed (max.): 16,000 rpm, overall weight: 63,000 kg, warranty duration: 18 months, State-of-the-art linear motor milling machine in a compact GANTRY design with 5 CNC-controlled simultaneous axes, particularly suitable for efficient 5-sided machining of workpieces made of synthetic and composite materials, model-building block material, and aluminum, as well as for HSC machining of cast and steel materials. Iedpfoz I Rlzsx Afujih Travel ranges: X = 5,500 mm x Y = 3,500 mm x Z = 1,500 mm Swivel milling head 15 with CNC-controlled A and C axes High-frequency milling spindle, HSK100A, 60 kW, 16,000 rpm, 160 Nm CNC control HEIDENHAIN TNC 7 80-position tool changer, chain magazine KSS and MMS Laser tool measuring system Wireless measuring probe RMP60 Bellows cover Equipment and further options available upon request. Available from August 2027!

Condition: repair required (used), Universal Milling Machine HURON MU6 Travel X: 1500 mm Travel Y: 700 mm Travel Z: 600 mm Spindle: SA 40 Spindle speed: from 30 to 2066 RPM Table size: Length 2000 mm x Width 460 mm Spindle motor: 12 CV Scale: 3 axes HEIDENHAIN Centralized lubrication Machine sold as is, some works required: - freewheel of the advances box to be changed - Y-axis locking system needs to be checked Iodpfoz Stlgsx Afujih - the ram inverter is non-functional - there is a leak on the spindle deflector - there is a missing pin on 1 gearbox lever Voltage: 380 V Length: 2200 mm (without ends table) Depth: 2000 mm Total height: 2000 mm Weight: approx 4 T

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Iiodpfxoz Sr Nqo Afush

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,750 mm, table load: 5,000 kg, spindle diameter: 100 mm, spindle speed (max.): 1,120 rpm, table length: 1,500 mm, table width: 1,500 mm, feed length W-axis: 900 mm, workpiece weight (max.): 5,000 kg, The last conventional machine standardly produced by TOS VARNSDORF Iiodpfx Aofk I Nijfush Solid design Also available in CNC version RET100B and the overhauled machine W100A-R MAIN PARAMETERS Workspindle diameter 100 mm Clamping taper 50 ISO Spindle speed range 1120 rpm Table transversal travel (X) 1600 mm Headstock travel (Y) 1120 mm Table longitudinal travel (Z) 810 / 1250 / 1750 mm Spindle stroke (W) 900 mm Table clamping surface max. 1500 x 1500 mm x mm Table loading capacity max. 3000 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. Iodpfez Sqq Tex Afusih The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Year of construction: 1997, condition: used, Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible. Iiodsz S Iwwopfx Afuoh

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 3 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 38 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 455/800 [mm] - Y stroke : 105 [mm] - B Axis stroke : 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : HSK50 - Spindle speeds : 30000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 48 [kVA] MACHINE HOURS - Number of working hours : 18186 [h] EQUIPMENT - CNC : FANUC 31i MAPPSIV - Linear scales - Tailstock option with counterspindle - Tool probe - Workpiece probe : Renishaw - Bar loader : IEMCA KID 80 Isdpfx Afsy I Dixeujih - Electric transformer

Condition: excellent (used), Year of construction: 2018, operating hours: 7,200 h, Technical Data Main spindle, counter spindle Turning length: mm 660 Spindle bore: mm 65 Chuck diameter: mm 165 Speed max.: min-1 6,000 Power (100% / 40% duty cycle): kW 20 / 24 Torque (100% / 40% duty cycle): Nm 125 / 170 C-axis resolution: degrees 0.001 Slide travel X: mm 710 Rapid traverse: m/min 60 Feed force: N 6000 Turret, lower / upper Speed max.: min-1 7,200 Power max.: kW 9 Torque max.: Nm 16 Milling spindle Tool system: HSK-A40 Speed max.: min-1 7,200 Torque (25% duty cycle): Nm 52 Power (25% duty cycle): kW 22 Tool holder 1 Slide travel X: mm 230 Rapid traverse: m/min 30 Feed force: N 6000 Slide travel Y: mm +/-65 Rapid traverse: m/min 15 Feed force: N 10,000 Isdpfxoz Sywce Afuoih Slide travel Z: mm 845 Rapid traverse: m/min 50 Feed force: N 6000 3 Turrets Turret 1 YB - 6-position tool changer HSK Turret 2 Y Turret 3 y Year of manufacture 2018 Control system Siemens SINUMERIK 840D sl Turning length up to 660 mm Spindle bore 65 mm Milling spindle with 360-degree B-axis Production hours approx. 7,200 h Turret, lower and upper Feature Specification Stations and tool positions 14 stations per turret (VDI 25), a total of 42 tool positions Maximum speed 7,200 min⁻¹ Maximum power 9 kW Maximum torque 16 Nm Milling spindle Feature Specification Tool system HSK-A40 Tool magazine 6 tool positions B-axis 360 degrees Maximum speed 7,200 min⁻¹ Torque at 25 percent duty cycle 52 Nm Power at 25 percent duty cycle 22 kW Tool holder 1 Feature Specification X-axis 230 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±65 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 845 mm, rapid traverse 50 m/min, feed force 6,000 N Tool holder 2 Feature Specification X-axis 140 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±45 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 810 mm, rapid traverse 50 m/min, feed force 6,000 N Workpiece removal Feature Specification Design Gantry part removal system with conveyor belt Maximum workpiece length 200 mm Maximum workpiece weight 5 kg Dimensions and connection values Feature Specification Length × Width × Height 5,355 × 2,235 × 2,400 mm Weight approx. 8,500 kg Connected power 42 kW Bar feeder magazine and accessories Feature Specification Bar feeder magazine INDEX MBL 65 Coolant system KNOLL system with band filter and high-pressure pump 80 bar Automation Automatic door Accessories Tool holder

Condition: good (used), Working travels 500x350x380mm Iiedpsff R Slefx Afuoh Table size 790x360mm Spindle taper ISO40 Spindle speeds 63-4000 rpm Active digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Plain text display Press force monitoring Wire straightening device Bosch stripping devices Mounting and brush motor with integrated tool W32/1-32 Soundproof cabinet Barrel for processing CU wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Press force / stamping unit: 200 kN Feed length: 250 mm Strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Iedog T S Tajpfx Afueih Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2016, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (headstock vertical): 1,300 mm - Z-axis (headstock horizontal): 750 mm Control system - CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head (change between horizontal and vertical machining) Iisdsh Rh T Hepfx Afujh quill 120mm Milling spindle holder SK 50 speed 2500rpm Year of manufacture 1994 - 2016 general overhauled Stepless NC rotary table - Rückle PKTF 55 - Clamping surface: 1500 x 1250 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main focus is in the area of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - Control system modernization

Condition: ready for operation (used), functionality: fully functional, Universal milling machine CME FU-3 is a tool used to machine metal parts or other hard materials by cutting or shaping them with a rotating cutter. It is equipped with a control panel with various buttons and switches to adjust its parameters and operations. Brand CME MODEL FU3 CM TYPE UNIVERSAL CARNERO MOTORIZADO TRAVELS X, Y, Z 1100 x 350 x 700 TABLE DIMENSIONS 1700 x 360 TAPER ISO 50 DIN 2080 SPINDLE ISO 50 DIN 2080 POWER SPINDLE MOTOR 7.5 Iiedorignwspfx Afujh MAIN MOTOR POWER 5,5

Condition: excellent (used), Knuth UFM 2 Universal Milling Machine Technical Specifications Travel X-axis (manual) 800 mm Travel X-axis 750 mm Travel Y-axis 300 mm Travel Z-axis 400 mm Table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle nose and table 0 - 400 mm Head swivel 45° Taper of horizontal spindle SK 50 Drive Iijdponfu Riefx Afush Main motor power 4 kW Motor power in the Z-axis 0.75 kW Feed motor power 0.55 kW Coolant pump motor 0.09 kW Coolant pump capacity 25 l/min Dimensions and Weight Dimensions 1900x1720x1750 mm Weight 2100 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Lista drawer cabinet with milling tools Lista drawer cabinet Number of drawers: 13 Drawer type: Full extension Very high load-bearing capacity due to the precise and stable construction made of high-quality, welded sheet steel Body color: Reseda green, RAL 6011 Iiodpjq Aa I Tefx Afueh Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal circular saw blades Disc milling cutters, cross-toothed & coupled Disc milling cutters, cross-toothed Angle half-round milling cutters Dovetail milling cutters Half-round milling cutters Thread milling cutters More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), With C-axis With driven tools FANUC TXP-200 FA control Turning diameter max 360 mm Turning length -683 mm Swing Diameter -450 mm Spindle speeds -3'000 rpm Top turret tool holders 12 driven positions Misc. accessories Isdpfxjq Dlt Sj Afusih MARCELS MASCHINEN CH

Condition: as good as new (ex-display), End milling cutter for hard metal castings Iijdpfx Afjdwbkwsuoh Diameter 79 mm and length 61 mm Diameter 98 mm and length 70 mm Weight 4 kg

Condition: as good as new (ex-display), End milling cutter for cylindrical surfaces Manufacturer: Strasmann Iedpfsdwblbex Afueih 150 x 95 NR HSS CO 10 Spiral: 800 mm 545214

Condition: excellent (used), Milling chuck Manufacturer: Clarkson Iisdpodx D Umjfx Afueh Type: Autolock SK 50 1 x 6 mm 2 x 12 mm

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Iedpfx Aeu Eqixefujih Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Digital read-out With milling and drilling head Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories MARCELS MASCHINEN CH Isdpfxow Nnuts Afujih

Condition: excellent (used), Milling and grinding machine Make: Brand Iodpfx Afoxmgcveueih Type: SP 50 SEO 30 / KS Year of manufacture: 1997 Belt sanding unit KS 30 Belt width: 120 mm Belt length: 2100 mm Belt speed: 14 m/s Profile sanding unit DS 40 0.75 kW 1000 rpm Spindle stub diameter: 30 x 100 mm

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Isdpfxevfm I Te Afuoih Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm Isdpfx Ajvzhiqofujih dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC