Used Wire Erosion Machine for sale (65,720)

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Itedpjza U Nlofx Aa Ioh Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Itodpfx Aaszadkxj Ish

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 370x270x255 [mm] - Travels on U/V axes : [mm] - Max. taper : +/-30/80 [°/mm] PART - Max. part dimensions : 700x600x250 [mm] - Max. part weight : 500 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1930x2330 [mm] - Machine height : 2270 [mm] - Machine weight : 2165 [kg] MACHINE HOURS - Number of working hours : 15874 [h] EQUIPMENT - CNC : Fanuc 31i-WA - Cooling unit Iedpfxexqrqaj Aa Ijth - Filtration unit

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. Isdpfszbimhex Aa Isth INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg Itedpfx Aaexd R Hmj Ioh

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Iedpfxoyxfqrs Aa Isth Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] Ijdpfoy Tzc Tjx Aa Ioth EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. 0.1 mm option available. Available for viewing at our facilities in Semsales, Switzerland. Isdpfxsy Tvtmo Aa Isth

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Iedpfx Aey N Df Nea Ioth

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Iedpfx Ajw N D Suja Isth Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: used, Year of construction: 1989, Model - 600/6 Itedpfjyubh Rex Aa Ioh Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Itedpfx Aor Nfvmoa Ieh Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw Itedpomqk Tpsfx Aa Ish

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: Itoden Ut A Sspfx Aa Ish 1997

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 8,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 3,700 kg, A demonstration machine is for sale. Travel range: X-axis: 600 mm Y-axis: 400 mm Z-axis: 300 mm U-axis: ±50 mm V-axis: ±50 mm Max. workpiece dimensions: 990 x 620 x 295 mm Max. table load: 550 kg Max. taper: Itsdpfxjza Eppj Aa Ioh ±21º / 100 mm Machine weight: 3700 kg Machine height: 2210 mm Machine dimensions: 2480 x 2980 mm Standard wire diameter: 0.15 to 0.3 mm Max. weight of wire spool (kg): 10 kg (P10) Surface quality: Ra 0.35 Capacity of the water system (l): 1000 Machine equipment: Transformer Windows CE touch screen controller Automatic wire threading (AWT) SD Master Tubular linear drive Collision protection X/Y/Z/U/V axes 0.1-μm resolution in the linear scale PC acrylic filter tank cover Standard remote box Water chiller Flush gun Protective door lock 3-filter water tank design CE conformity configuration Demineralized water tank

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2Wire EDM machineWorkpiece height: approx. 250 mmWorkpiece weight: approx. 400–500 kgTable size: approx. 600 x 400 mmSupply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA.Wire EDM technology, automatic wire feed, hydraulic systems, robust construction.Control panel, emergency stop, sensor monitoring. Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Isdpfsy S Ni Eox Aa Ijth Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Year of construction: 2,004 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Year of construction: 2001, overall weight: 3,350 kg, total length: 2,100 mm, total width: 2,000 mm, total height: 2,300 mm, CHARMILLES TECHNOLOGIES ROBOFIL 510with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional.Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A.Automatic wire tensioning, precise wire guidance, stable construction.Control console (Siemens), protective devices, emergency stop. Weight approx.: 3,350 kg Control: CNC-Steuerung Travel X-axis: 500 - mm Travel Y-axis: 350 - mm Travel Z-axis: 400 - mm Dimensions (LxWxH) approx.: 2100 x 2000 x 2300 mm Year of construction: 2,001 Iedpfx Ajy S Axtja Ieth Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Iedpey R Dtcefx Aa Ioth

Condition: used, Year of construction: 1963, functionality: fully functional, machine/vehicle number: D06L/7457, Offer Number: D06L/7457 Machinetype: wire and strip bending machine Make: BIHLER Type: RM25 Constr. year: 1963 dia. range: 0,5-2,5 mm width of band: 50 mm feeding length: 170 mm number of slides: 5 punching power: 5 to output - pieces/min: 225 Location: In our warehouse Itodpfx Aaswi S Rto Ijh

Condition: good (used), Year of construction: 2001, Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Max. taper angle: 15° (for workpiece 100 mm thick) Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Isdpfx Aeg Icdysa Ieth Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. Iedpfex R Uzdjx Aa Ieth A very clean looking machine. On site viewing and inspection recommended

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, You get two machines for the price of one. One is fully functional and in good condition for its age, equipped with a collecting system (sliding slats). The other can be made functional again with minimal effort, but the new owner can also use it for spare parts (all electrical cards are intact; the pump system and wiring harness require repair). The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision of the German Matra machine tool engineering. Ijdjzcww Repfx Aa Ieth

Condition: like new (used), Year of construction: 2018, operating hours: 7,600 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, wire diameter (max.): 0.3 mm, empty load weight: 1,800 kg, table load: 500 kg, Equipment: cooling unit, documentation/manual, The machine includes Fanuc-CAMi software. Factory documentation is available. It operates flawlessly and with high precision. This machine is used for custom parts manufacturing. It was operated in a single shift. Itodpfozcv R Njx Aa Ioh

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 with few operating hours Itjdsy Rxtkspfx Aa Ish It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: fridge, AGIECHARMILLES CUT 30 WIRE EDM MACHINE, YEAR OF MANUFACTURE 2011 TRAVEL: X 600, Y 400, Z 350, U/V ±50 MM MAXIMUM TAPER: 25°/80 MM AUTOMATIC THREADING AND RE-THREADING Ijdpfjy Tw Tbox Aa Ieth RE-THREADING HEIGHT: 350 MM WIRE SPOOLS UP TO 25 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS COOLING UNIT TEST CUT POSSIBILITY