Used Wire Cut for sale (16,296)

Condition: ready for operation (used), machine/vehicle number: 30116, Arc current at 100% ED: 120 A Voltage: 110V electr. Connection for: 380 or 400 V Required space: 1250 x 900 x 1000 mm Nodsga Tmyopfx Agwokw

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 04/2028, type of input current: AC, total length: 440 mm, total width: 1,700 mm, total height: 470 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 470 mm, space requirement length: 440 mm, space requirement width: 1,700 mm, Cutting LEO with extended infeed conveyor Pretzel Bun Baguette - Schneider Tabletop unit made of stainless steel Knife height adjustable for average Belt speed adjustable DGUV V3 tested Connection 230 / 240V, 50 Hz, ready to plug in Passage width / height 140/90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW machine With guarantee optional: Nedpfsf Epwvex Agwokw - Mobile table for LEO - Cutting - freight costs - Shipping wooden crate VISIT our sales center with bakery equipment and many bakery machines

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: GG6BCO-7816, total width: 3,660 mm, total length: 7,100 mm, overall weight: 3,300 kg, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, Bottero 100BLC jumbo table with belts and air cushion as loading and supporting table. Serial Number: GG6BCO-7816 Nksdex A D Rvspfx Agwow Dimensions: L7100xW3660mm and approx. 3300Kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: GG6BCO-11346, total width: 3,500 mm, total length: 7,100 mm, overall weight: 3,300 kg, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, Loading table with belts for jumbo sheets. Incl. option lean-to device. Dimensions: L7100 x W3500 mm. Nkedswyz E Uspfx Agwjw

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: GG94CX-8483, total width: 6,000 mm, overall weight: 9,700 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 7 bar, cutting length (max.): 6,000 mm, Bottero 746 VSX 4600mm bridge and LMT Low-E coating grinder, modification from VSX to VMX in 2009. Nksdpfxox Sdyfs Agwjw 100LC infeed table included.

Condition: good (used), Year of construction: 2012, operating hours: 750 h, functionality: fully functional, machine/vehicle number: GG5BTO-20295, total width: 3,510 mm, total length: 4,760 mm, overall weight: 1,900 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 8 bar, Configured as follows: 352BCS-R EVO air cushion & tilting motion assembly Quick shut-off, edge barriers, On-board optimization. Regular breakout bars assembly Sandblast plastic cutting OPTWIN-CAD/M CE safety barriers Nedpfx Ajyg Etzegwskw 200 m/min - 2-19 mm - 1900 KG

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: GG520A-17518 & GG502S-16471, total width: 5,100 mm, total length: 5,350 mm, total height: 1,500 mm, overall weight: 3,250 kg, type of input current: three-phase, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Maximum measurement: 3210 mm Minimum measurement: 150 mm Maximum cutting length: 3700 mm Minimum cutting length: 250 mm Monolithic: 3–10 mm Laminated: minimum 2+0.38+2 (22-1) maximum 8+4.56+8 (88-12) Maximum glass weight for loading/unloading on arms: 450 kg Nedeycgiispfx Agwjkw

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 510740, total width: 5,900 mm, total length: 3,760 mm, overall weight: 4,000 kg, input current: 33 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Glaston Bavelloni 370 S Lamy table Serial Number: 510740and wir diagr nr: 9500750300 Voltage:400v -Power 43.2kw - lcc max: 10ka -50Hz - IA: 33A Weight +/- 4000kg Glasthickness 3/3 till 10/10 Nkjdpfx Agju D Namswsw

Condition: excellent (used), Year of construction: 2016, operating hours: 158 h, functionality: fully functional, machine/vehicle number: GG6TKB-21932, total width: 4,201 mm, total length: 7,151 mm, overall weight: 2,250 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,100 mm, feed length Y-axis: 3,355 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Loading, cutting and break out machine for monolithic glass sheets with less than 158 working hours! Glass thickness automatic detection device enables automatic adjustment of machine parameters. Jumbo sheets: max. 6100x3355 mm, thickness 2–19 mm. Nkedpfx Aownww Nogwew

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking and separating laminated glass. SN GG520A-19388 from 2011. Automatic positioning based on optimisation, automatic blade, 2 independent heating element sections, 20mm trimming, laser device for positioning diagonal cuts. Max cut 3700mm, max speed 100m/min, min 2/2 and max 8/8mm. Included: New felt (5mm) on the unloading table, the 520 LAMe-37 has also been serviced. Nkodpfx Aexg Nxyjgwjw

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG94US-13608, total width: 6,200 mm, total length: 10,500 mm, overall weight: 6,000 kg, input current: 34 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 8 bar, pressure: 8 bar, Table for laminated glass, max 8+8 and 4600mm including loading table 100BLM-J Total weight approx. 6000Kg. Nksdpfx Agexq D Uwowsw

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 551A 117, total width: 4,900 mm, total length: 6,100 mm, overall weight: 4,500 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 4,600 mm, BOTTERO LAMILINEA 551A - Year 1993 Max cutting length: 4600 mm Air cushion power: Minimum 200 mm water column Processable thickness range Nkedpfx Agoyntq Rswow Monolithic: 3 - 10 mm Laminated: 3 + 0.38 + 3 (33-1) minimum, 8 + 4.56 + 8 (88-12) maximum Maximum carriage speed: 40 m/min - Max. cutting tolerance: +/- 0.5 mm Overall dimensions: 4900 x 6100 mm Weight: 4500 kg Working table height: Adjustable from 900 up to 940 mm Installed power: 18 KVA Compressed air max. consumption: 500 NL/min

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG60SB-13594, total width: 4,030 mm, total length: 7,000 mm, overall weight: 2,500 kg, input current: 11 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,300 mm, feed length Y-axis: 6,100 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Bottero float cutting table (shapes) 2-19mm, max cutting size L6100x3300mm Dimensions: L7000xW4030mm, weight +/-2500Kg Nedpfsxrmpmjx Agwekw

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: GG65LC-13642, input voltage: 380 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 605-J: Movable PLF rack storage system for 8 positions from 2007 Bottero 620CMT-J: Automatic loading table. SN: GG8CMT-13641 (3200Kg-17.5A-10kA) from 2007 Nkjdpfx Agew I Dvkswow Bottero 543LMT-J: PLF float cutting table with LMT Low-e coating grinder. SN: GG65LC-13642 (2600Kg-39.1A-10kA) from 2007 Bottero 352 BCS at the end of the cutting/grinding line as break-out table. SN: GG60SB-3040 (2250Kg - 50Hz - 14.5kVA-380V) from 1995

Condition: used, MONNIER + ZAHNER MZ 130 is a Worm gear cutting machine designed for high precision, excellent accuracy and reliable performance. Capacities: workpiece diameter 2–55 mm; module max. 1.5/2.0 mm; workpiece length max. 300 mm; max. cutting length 230 mm; cutter diameter 16–40 / 53–100 mm; max. cutter travel 60 mm; swivel head +/-45°; axes X70 Y30 Z250 mm. Key specs: milling spindle speed max. 8000 t/min; workpiece spindle speed 950 t/min; collet attachment 25 W; voltage 50 Hz 3x400 V; machine weight ≈3500 kg; overall L2200 x W1800 x H1850 mm. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors. Nksdpfoyxnwzsx Agwjw

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Nkodpfoywwrfsx Agwsw Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: Nsdpfxoywwq Ue Agwskw 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: used, Year of construction: 2023, total height: 1,650 mm, total length: 3,900 mm, total width: 1,100 mm, Weight: 700 kg Price: On request - Year: 2023 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: B725 - Main motor power [kW]: 5.5 - Max. saw length [mm]: 3570 - Max. saw width [mm]: 300 - Max. saw height [mm]: 150 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 35 - Input table length [mm]: 3000 - Output table length [mm]: 3000 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 5.5 Nkodpsytclbjfx Agwjw - Transport dimensions: 3900mm x 1100mm x 1650mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2003, Paper cutting machine Polar 66, year of manufacture 2003, light barriers, air table, program control, in good condition, available immediately Nkodpen Hqgnjfx Agwew If you are interested, we will be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes Nkedpfxeif Ek Rs Agwsw • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device Nsdpfefnlkwsx Agwokw User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Nodpfx Aoyxc Afjgwokw

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A Njdpfx Age Sdrfjwokw space needed: 820 x 1220 x 930 mm weight: 750 kg

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut Nkodpfx Agofhgvwswjw For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Njdpfjwgc I Rsx Agwskw Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.