Glass cutting table

Bottero 520LAMe 37

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. Hsdpsxnvq Esfx Aagjnl V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 10 cup wheels vertical glass edging machine with variable angle 0-45° Hedpfxsw U Ddus Aagonl actual running meters : 260.000 min. glass size : 40 x 40 mm glass thikness : 3 - 55 mm speed : 0,4 - 6 m/min. voltage : 400 V 50 Hz 39 A weight : 4600 Kg

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control Hodpfeuiy Nyox Aagjnl - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. Hodpfx Aajt Hw N Hegenl * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Hnsdpfoh Ug Ulex Aagol Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 250 kg, Equipment: crane, GEDA KOSI GRAĐEVINSKI LIFT COMFORT 250 12M NOVO Hnsdoxvyagjpfx Aagol TIP: GEDA COMFORT, NOVO, 2026. god. Proizvođač: GEDA, Njemačka Pogon: 1,3 kW/230 V/50 Hz Nosivost: max 250 kg Brzina dizanja: 30 m/min Pribor za visinu dizanja do 12 m se sastoji od: - Elektromotor - Zaglavak s koloturom - Standardna kolica sa sigurnosnom kočnicom - Početna tračnica 2,0 m - Produžetak 250/2 m x 4 kom - Produžetak 250/1 m - Koljeno(od 20 do 45*) - Univerzalna košara ( 82 x 35 x 70 cm) +++++ ++GEDA KOSI LIFT MOŽETE DOBITI I SA 200KG NOSIVOST-MODEL 'STANDARD'++ +++++ +++++ZATRAŽITE JOŠ POVOLJNIJU PONUDU ZA GEDU STANDARD 200 +++++ +++++GEDA JE IDEALNA ZA DIZANJE SOLARNIH PANELA+++++ +++ZA VISINU DIZANJA DO14M DODAJE SE JOS JEDNA TRAČNICA OD 2,0 M++++ ++++POSEBNA PROMOTIVNA CIJENA ZA 14M: CIJENA NA UPIT+++++ +++MOŽETE ISTO KUPITI 10M, 16M, 18M, 20M itd.+++++ +++++ +++++VIŠA VISINA GEDA LIFTA OD 21m:+++++ ++++SA 43 M SAJLE MOŽETE SLOŽITI GEDU DO MAX. 21M DIZANJA+++ +++SAMO DOKUPITE JOŠ 2-METARSKIH TRAČNICA+++++ +++MOŽETE ODABRATI RAZLIČITE VISINE DIZANJA--10M, 12M, ILI 16M+ ++++18m++20m++22m++24m++26m++28m++itd.+++++ +++++PRIKAZANA CIJENA JE ZA 12M+++++ +++OVISNO KOLIKO 2-METARSKIH TRAČNICA KUPITE+++++ +++AKO VAM JE POTREBNA VEĆA DUŽINA OD 21M - UGRAĐUJEMO ++ +++++VAM++++GRATIS++DUŽU SAJLA OD 63M+++++ +++++ +++++OD PROFESIONALCA ZA PROFESIONALCE+++++ +++++ MONTAŽA MOGUĆA ISTO NA TERASE, BALKONE, RAVNE KROVOVE+++ +++ILI PROZORE TE UZ SKELU KAO OKOMITA DIZALICA+++++ ++ZA DIZANJE MATRIJALA KOD FASADERSKIH RADOVA+++++ +++++UZ GEDA VARIO-PREINAKU+++++ +++++(NIVELIRANJE KOŠARE U VODORAVNI POLOŽAJ)+++++ +++++ DOBIVATE OKOMITU DIZALICU +++++ +++++DAKLE DOBIJETE 2 DIZALICE U JEDNOJ +++++ ATEST za kosi građevinski lift od ovlaštenog poduzeća za ispitivanje i kontrolu. +++++ +++ORIGINAL GEDA UPUTSTVO ZA MONTAŽU I RUKOVANJE NA HR-JEZIKU+++ +++++ +++AKCIJSKA CIJENA GEDA 250 SAMO++4.900 +++++ +++AKCIJSKA CIJENA GEDA 200 SAMO ++4.200 +++++ +++++GARANCIJA 12 MJESECI!+++++ +++++ +++++UVJEK NA LAGERU SPREMNO ZA ISPORUKU VIŠE KOMADA GEDA LIFTOVA +++++ +++++STANDARD 200KG +++++TE+++++COMFORT 250KG +++++ +++++ZA SVA DODATNA PITANJA NAŠ TIM STOJI NA RASPOLAGANJU+++++ NAJBOLJE NAS NAZOVITE I SAZNAJTE KOJI JE GEDA KOSI LIFT NAJBOLJI ZA VAŠE POTREBE +++++ ++++MI SMO GLAVNI OVLAŠTENI ZASTUPNIK I +++++ SERVISNI CENTAR ZA GEDA ORIGINAL GRAĐEVINSKE DIZALICE U ++ REPUBLICI HRVATSKOJ++VEĆ PREKO 30 GODINA+++++ +++++

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Hnsdpfx Aaswwzudegol Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Year of construction 2004 Laser height adjustment Hjdpeuiwypofx Aagonl Working width 3100mm pressing force 220 tons with many tools

Condition: used, max. wheel diameter 180 mm gear width 45 mm Hnsdjtycg Sopfx Aagjl max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: used, Year of construction: 2018, Opportunity to buy an excellent Bystronic ByStar fiber laser with 4000 x 2000 mm working area and 6000W laser output (Dynamix edition F6000). Including: V1 cutting head (first version) NCT zle Changer 64 Pos. Detection Eye Dust extraction system 1 Basic Machine 1.1 ByStar Fiber 4020 Dynamic Edition F6000 1.2 Scope of Delivery 1.3 Safety and Guidelines 1.4 Complete Documentation 1.5 Power Cut Fiber 1.6 ByPos Fiber 1.7 Cut Control Fiber 1.8 Scanning 1.9 Swap Table 1.10 Laser Source 1.11 Cooling Unit 1.12 Tank Heater 1.13 Machine Control and User Interface 1.14 Uninterruptible Power Supply 1.15 Condition Messenger 1.16 Maintenance Messenger 1.17 Cutting Plan Editor 1.18 Restart Manager Hodpfx Aajx Tcvnsgjnl 1.19 System Manager 1.20 Cutting Parameter Assistant 1.21 OPC Interface Cutting 1.22 Handheld Control Unit 1.23 Electrical Connection 1.24 Compressed Air (Machine, Laser Source, Cooling Unit, Dust Extraction System) 1.25 Material Specification 1.26 Cutting Gas 1.27 Environmental conditions 1.28 Structural requirements Immediately available and can be inspected under power upon appointment. Working dimensions: 4000 x 2000 mm Laser output: 6000W Power On hours: 49086h Cutting hours: 18659h