Used Wire Cut Edm Machine for sale (68,256)

Condition: excellent (used), Year of construction: 2020, operating hours: 13,800 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Pedpexnx Itefx Akiogu Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Pgodpewzyvhsfx Akieu Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2005

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. Pgsdpfoz Spd Iox Akiju In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Pick-up only.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, Equipment: cooling unit, documentation/manual, Special Offer – 5% Discount Available! EDM32 Wire EDM Machine The EDM32 Wire Electrical Discharge Machine is a precision CNC machine designed for electro-erosion machining of electrically conductive materials. It is an ideal solution for toolmaking, mold manufacturing, and the production of precision components requiring high dimensional accuracy and excellent surface finish. The machine efficiently cuts complex profiles and intricate geometries in both single-piece and serial production. Its rigid construction and optimized machining parameters ensure reliable performance, excellent repeatability, and high productivity. The EDM32 supports taper cutting up to ±6°, allowing greater machining flexibility. It uses wire diameters from 0.12 to 0.25 mm, enabling highly accurate machining of demanding workpieces while achieving a surface finish of 1.6–2.5 Ra, minimizing the need for secondary finishing operations. With a maximum table load of 400 kg, the machine is capable of machining heavy workpieces without compromising precision. Main Features • High-precision wire EDM machining • Suitable for complex profiles and intricate geometries • Taper cutting up to ±6° • High machining accuracy and repeatability • Excellent surface finish • Stable machine construction • Low operating costs • CE certified Technical Specifications • Model: EDM32 • Table travel: 440 × 350 mm • Table size: 380 × 650 mm • Maximum cutting height: 400 mm • Wire diameter: 0.12–0.25 mm • Taper cutting: ±6° • Maximum cutting speed: 120–150 mm²/min • Surface roughness: 1.6–2.5 Ra • Machining power: 2 kW • Wire speed: 11 m/s • Maximum table load: 400 kg • Machine dimensions: 1650 × 1150 × 1700 mm • Machine weight: 1150 kg Applications • Mold and die manufacturing • Toolmaking • Precision metalworking • Production of complex and high-accuracy components • Prototype and serial production Transport and Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Podpfx Ajy A N Ezjkiogu Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Podpfxjyvuuzj Akiogu

Year of construction: 2006, condition: used, X-axis: 570mm, Y-axis: 370mm, Z-axis: 350mm, working area dimensions: 1050x720mm, U/V-axes: 120x120mm, taper angle: ±20°, max. workpiece dimensions: 770x520x340mm, max. workpiece weight: 1t, wire diameter: 0.15-0.3mm, wire tension: 3-23N, max. wire feed: 420mm/s, floor-to-table distance: 995mm, dielectric tank external dimensions: 725x2550mm, weight empty: 600kg, capacity: 800l, connected load: 15kVA, control: Sodick LQ33W, length: 2600mm, width: 2740mm, height: 2390mm, machine footprint: 3700x3900mm, machine weight: 4.6t, cutting time: 13,775h, machine-on time: 62,484h, with Super-Pika, wire chopper, SMS box with wall-mounted enclosure, an on-site inspection is possible. Pgedpfez Ekdfox Akiju

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, Submitting a bid obligates the bidder to collect the item by December 1, 2026. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 7040 (L62) Year of Manufacture: 2012 Operating Hours: need to be updated Working Area Working area X/Y/Z: 4,000 × 2,500 × 115 mm Speed: max. 304 m/min Accuracy: ±0.1 mm Laser Laser power: 2 × 4 kW Pgedj Aayn Nopfx Akiou Laser heads: 2 units Condition of laser heads: functional Cutting Capacities Sheet metal thickness steel: max. 20 mm Sheet metal thickness stainless steel: max. 15 mm Sheet metal thickness aluminum: max. 10 mm Control System Control system: Siemens Sinumerik 840 D SL Machine Dimensions and Weight Length: 15,800 mm Width: 7,280 mm Height: 3,090 mm Weight: 16,500 kg Environmental Conditions Ambient temperature: max. 43 °C EQUIPMENT Thin sheet metal productivity package for high-speed, standard, and compressed air cutting 2 lens cutting heads with 130 mm focal length Compressed air cutting BrightLine CoolLine with 2 separate lens cutting heads 4 clamping jaws, 2 per pallet Wide transverse conveyor belt “Wavebelt” with tilting container Tilting container to the left of the machine More powerful compact dust extractor Connection piece for the exhaust duct of the compact dust extractor MDE interface

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Pgodpfx Ajw Swd Aekisu

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, including option KIT 50 Includes automatic wire changer AWC Wire EDM machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes Pgedpfjz I Nbbex Akisu VISION 5 control 15" LCD color screen, jog shuttle and mouse Includes Conic-Plus option for improved taper Includes Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We would be happy to perform an individual test cut. We also offer on-site commissioning and training for this machine.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers Pgodpfx Aey Snwnokisu - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2018, functionality: fully functional, Working area: 3000 × 1500 mm Design: Downdraft / fume extraction table Plasma source: Hypertherm Powermax65 Max. current: 65 A Pgedpsz Iniqefx Akiou Plasma source power supply: 400 V / 3-phase Compressed air: min. ±5.9 bar CNC plasma cutting machine with automatic torch height control

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Pgedpez Uwf Aofx Akieu Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Podpfezqu Hqox Akiogu

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Item for sale: 1 x Magnopro I-Cut 7550 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Pedpfx Aez I Tgujkiogu The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2001, overall weight: 3,350 kg, total length: 2,100 mm, total width: 2,000 mm, total height: 2,300 mm, CHARMILLES TECHNOLOGIES ROBOFIL 510with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional.Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A.Automatic wire tensioning, precise wire guidance, stable construction.Control console (Siemens), protective devices, emergency stop. Travel X-axis: 500 - mm Weight approx.: 3,350 kg Control: CNC-Steuerung Dimensions (LxWxH) approx.: 2100 x 2000 x 2300 mm Travel Y-axis: 350 - mm Travel Z-axis: 400 - mm Year of construction: 2,001 Pjdey S Axtepfx Akiegu Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Pjdpfjz Sr Nqsx Akiegu

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,325 mm, total length: 3,100 mm, total width: 2,800 mm, overall weight: 5,000 kg, Equipment: cooling unit, GF AgieCharmilles CUT 30P – Wire EDM machine, manufactured in 2011 Wire EDM machine for tool and die making Technical data & features: - Travel ranges X/Y/Z: 600 × 400 × 350 mm - U/V axes: ± 50 mm - Max. workpiece size: 1,050 × 800 × 350 mm - Max. workpiece weight: 1,000 kg - Tapered machining: up to ± 25° at 80 mm height - Wire diameter: 0.15–0.30 mm, wire spool: 25 kg - Automatic wire feeding and re-threading - Glass scales, automatic wire tensioning and collision protection - Surface quality: up to Ra < 0.25 µm - Windows-based control system with 15″ LCD, DXF import and 3D graphics check Pgedpfx Aoz I Ritekiou - Connection power: 9 kVA The machine has already been cleaned, overhauled and tested. You are welcome to inspect the machine on site and test it under power. We can also offer transport, commissioning and training as additional services. Contact us for a customized offer.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF AgieCharmilles CUT 1000 Year of manufacture: 2018 Pgedpfx Aez I Ni Sokiou Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.02 mm to 0.20 mm (including optional KIT F20) Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15" LCD color screen with jog wheel and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, overhauled, and thoroughly tested by our specialists. We will gladly commission the machine at your facility and provide training on the control system and machine operation.

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Pjdpfx Aex Hghujkiegu incl. chiller Automatic wire threading Water bath

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change Psdpo Af E E Rsfx Akijgu – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Year of construction: 2010, For sale Psdpfezrfpxjx Akiogu CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Pedpfsy R Dtcsx Akijgu

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Pjdpeytkdrofx Akijgu Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. Pgsdpfxowqcm Us Akiju We are also happy to offer commissioning and training.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Psdjw Ucyuopfx Akijgu Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.