Used Wide Belt Sanding Machine for sale (70,527)

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Bsdpfx Ajw Naanemmsdc MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: reconditioned (used), functionality: fully functional, Refurbished, automatic leveling wide belt sander suitable for calibration and sanding of solid wood. The CB 1030 belongs to the higher class of automatic wide belt sanders, distinguished especially by its very robust and rigid machine frame and excellent sanding quality. Bsdpfx Amsxgq Naemjdc Equipped with 2 units: roller + roller and platen with a shared 11 kW motor: 1. Calibration roller with hard rubber 2. Sanding roller with soft rubber + mechanically adjustable sanding platen Sanding width: 1030 mm 2 feed belt speeds Motorized thickness adjustment + fine manual tuning LCD display of working thickness Ammeter for monitoring motor load Automatic workpiece thickness measurement Worktable lift on four screws Pneumatic oscillation (6 bar), electronically controlled Infeed and outfeed table extensions Required extraction: approx. 3500 m³/h The machine is fully overhauled, set up, and tested. Price: 5,300 EUR

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine with two sanding belts and a cutterhead for milling Bdjdpfx Aswmxh Tjmmec

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Bdsdpfx Ask Dpp Ssmmsc Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 1993, functionality: fully functional, Manufacturer: Sandingmaster (Holland) Model: SCSB3-1300 Year: 1993 Material: solid wood panel Working width 1300 mm Working height 150 mm Motor contact roller 25 HP Motor fine sanding pad 15 HP Feed motor 1/1,75 HP Bdodpexwwkrefx Ammoc Feed speed 7 and 14 m/min 23 and 46 ft/min Standard hardness contact roller 80° shore Dimensions sanding belts 1900 x 1330 mm Weight ~4000 kg

Condition: used, BOGMA wide belt sander, Type: KFY-M Number: A0091 Bsdpfx Amexrzudsmodc 2 aggregates: first rubber roller, second sanding shoe

Condition: excellent (used), Year of construction: 1992, Wide belt sander Manufacturer: Bütfering Model: AWS 1100 Year of manufacture: 1992 Sanding width: 1,100 mm Max. workpiece thickness: 150 mm Abrasive belt dimensions: 1,900 x 1,100 mm Power: 15 kW Feed speed: 2.5–12.5 m/min, variable Bodpfx Amsywi Rmomodc

Condition: used, Technical data: Working width: 910 mm 1 sanding unit Roller diameter: 300 mm Workpiece height: 160 mm Extraction port diameter: 160 mm Electric height adjustment Analog height indicator Main motor power: 9 kW Voltage: 380 V Bjdsy R Snbepfx Ammsdc Overall dimensions: Length: 1800 mm Width: 1500 mm Height: 2150 mm

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AE/026727, feed rate X-axis: 9 m/min, total width: 1,640 mm, total height: 2,300 mm, total length: 2,200 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,900 kg, table height: 900 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt speed: 18 mm/s, type of input current: three-phase, grinding belt length: 2,150 mm, workpiece height (max.): 170 mm, compressed air connection: 8 bar, grinding belt width: 1,115 mm, table length: 2,100 mm, table width: 1,150 mm, power of feed motor: 2,000 W, air demand: 40 m³/h, operating pressure: 6 bar, workpiece width (max.): 1,100 mm, The machine is operational. It will remain in service until July 20, 2026. Bdjdpfx Asy R Er Temmoc

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min Bjdpfxswka S Ue Ammsdc 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim

Condition: used, Year of construction: 1990, Used Weber wide belt sanding machine with 2 sanding belts, oscillating. Infinitely variable feed speed. Sanding width 900 mm. Used as a backup machine. Bodpswzlqkjfx Ammedc

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 150 mm, type of input current: three-phase, – Made in Germany – Shoes with pneumatic jump (pressure shoe) TECHNICAL PARAMETERS: – Sanding width: 1100 mm – Max. sanding height: 150 mm – Min. workpiece length: 600 mm – Motor power: 2 x 15 kW – Both units with pressure shoes – Pneumatic pressure shoes – Adjustable shoe pressure – Rubber rollers: 70 Shore – Pneumatic oscillation Bdedpfx Asyyv Ausmmoc – Cleaning brush – Feed tables with support rollers – Continuously adjustable feed speed – Feed speed range: 4–13 m/min – Extraction port diameter: 3 x 200 mm – Machine dimensions (L/W/H): 250 x 200 x 210 cm – Weight: ~2500 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic calibrating wide belt sander suitable for fine sanding of solid wood. This sander is categorized among the top-tier range of automatic wide belt sanders, distinguished in particular by its compact size, excellent sanding quality, user-friendly operation, and high reliability. It has been used for the final sanding of solid parquet flooring. 2 main units: soft sanding drums, 1350 mm Additional units: Scotch-Brite brush, cleaning brush, cleaning air jets Total maximum power consumption: 31 kW Working width: 1350 mm Constant working table height – suitable for in-line integration Motorized thickness adjustment with LCD display Variable feed speed of the conveyor belt Continuously adjustable speed for both sanding units Pneumatic air cleaning of sanding units Ammeter for monitoring motor load Remote deactivation of units from the control panel 4-position end stop for abrasive belt grit compensation Perforated feed belt with suction capability for workpieces Roller table extension at both infeed and outfeed Electronically controlled pneumatic oscillation CE safety standard compliant Weight: 3,800 kg Year of manufacture: 2008 Bdjdsy Idxyspfx Ammoc Damage to the first sanding drum – see photo Price negotiable: €28,000 excl. VAT The machine is fully operational and sold as is In stock in Telnice near Brno, Czech Republic Testing, demonstration, and operator training available as standard

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, working width: 630 mm, power: 9 kW (12.24 HP), Wide belt sanding machine SCM type Sandya Win. Sanding width 630 mm. Equipped with a combination unit for coarse and fine sanding. Electric drive. Operation possible with 16 amps. Transport within Europe available at competitive rates. Bdsdpoy Ec Easfx Ammoc

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) Bsdpjx A Unxsfx Ammodc - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Wide Belt Sander SCM Sandya S600 RCS 110 | Excellent Condition | Year of Manufacture 2015 For sale is a high-quality wide belt sander from SCM (Sandya S600 RCS 110) in very good condition. The machine is fully operational and ready for immediate use. Working width: 1,100 mm Working height: 4–170 mm Main motor: 15 kW Belt speed: 3–16 m/s Feed speed: 3–18 m/min Belt length: 2,150 mm Steel calibration roller R (Ø 140 mm) Combination unit CS: Rubber roller (Ø 160 mm, 30 Sh) Electronic segmented pad (segment width 30 mm) Year of manufacture: 2015 Well maintained, technically flawless All information provided without guarantee. Technical data according to manufacturer or previous owner. Subject to errors, changes, and prior sale. No guarantee or warranty. Bdjdpfxoy Hn U Ae Ammec

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal unit for sanding, among other things, veneer before lacquering. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm constant Workpiece thickness max.: 3–140 mm Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, including extraction device Feed speed: 4.5–22 m/min, adjustable Units: cross/longitudinal/brush Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Brush material: fibre 1. Cross sanding unit - Wear-free brake system - Pneumatic belt tensioning - Belt run monitoring - Pressure lamella belt system, intermittent belt cleaning device - Sanding belt dimensions: 4900 x 150 mm - Belt sanding speed: 12 + 24 m/s Bsdpfsya I Risx Ammjdc - Drive power: 13 / 17 kW 2. Longitudinal sanding unit - Infinitely variable electronic control of sanding belt speed via frequency inverter - Wear-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Belt control: infrared - Sanding belt in counter-rotation - Sanding belt dimensions: 2620 x 1350 mm - Belt sanding speed: 0.3 – 12 m/s - Drive power: 11 kW Graphical operating terminal for entering machine settings, including numerical thickness adjustment as well as fault source, workpiece passage, and feed speed display Electronically controlled pressure beam Roller spacing: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Weight approx. 5500 kg Space requirement approx. 2550 x 2675 x 2400 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Bdsdpfsq Tp H Hox Ammoc

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Bdsdpjyttyvsfx Ammec Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: used, functionality: fully functional, SAC 1000 CLS/S Wide Belt Sander - Ready for Operation Specification: • Condition – used, after comprehensive inspection • Manufacturer – SAC • Model – CLS/S • Working width – 1000 mm • Max. working height – 160 mm • 1 sanding unit – hard rubber drum • Main motor power – 11 kW Bdodpjy R Evrsfx Ammsc • 2 conveyor feed speeds • Table with pneumatic actuators – optimal for calibration • Electronic thickness gauge for sanded workpieces • Oscillation on pneumatic shoe • Abrasive belt dimensions – 1030x1900 mm • Weight approx. 1300 kg • Overall dimensions 150 x 222 x 187 cm (L x W x H) Additional Information: • Machine is in excellent technical condition and ready for immediate use • Photos show the actual condition of the item offered for sale • Possibility to start up and test the machine on site • Free operator training (at company headquarters) • Price listed in the auction does not include VAT or shipping costs Financing and Transport: • Transport can be arranged with MDD fleet, courier services, or external carriers • We offer financial solutions such as leasing or lease loan

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4806170, grinding width: 1,350 mm, grinding belt length: 2,260 mm, workpiece height (max.): 160 mm, grinding belt width: 1,380 mm, TECHNICAL DETAILS Bdjdpfxjyzm Sij Ammsc Working width: 1,350 mm Abrasive belt width: 1,380 mm Abrasive belt length: 2,260 mm Working height range: 3 - 160 mm EQUIPMENT Color display control system IPC Program positions can be stored in the terminal Automatic real-time adjustment of all necessary processing parameters Perforated rubber conveyor belt for extraction External reference: MNA001

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Dimensions & Weight Bodex Tt Uujpfx Ammodc Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: excellent (used), Year of construction: 2003, Bütfering Optimat SBC 111 C Sandy Working width: 1100 mm Abrasive belt width: 1120 mm Abrasive belt length: 1900 mm Upper section adjustment, constant table height Sanding unit type C - 1 combined contact roller sanding unit, with abrasive belt grit compensation and calibration device SWP – steel contact roller (profiled) EG 25 – electronically controlled segmented pressure beam in compact design, element width 25 mm A 3 – triple pole-changing drive motor 3.7/7.5/15 kW Abrasive belt speed: 4.5/9/18 m/s BV – belt blow-off device TE 1 – terminal with 50 freely programmable sanding programs for automated machine control STV – belt feed (carpet feed) driven by continuously adjustable gear motor, feed speed 2.5 - 13 m/min RTE – roller tables at infeed and outfeed FB – rotating cleaning brush on the outfeed side Total connected load approx. 16 kW Operating manual Year of manufacture: 2003 New conveyor belt Bsdpfxjy E Rt Ee Ammedc Price

Condition: good (used), Year of construction: 1995, Multi-purpose surface sander, paint sander, modular unit, finishing unit, sanding unit, sanding station, belt sander Bedpfx Amsgnnbvemjdc -Max. sanding belt width: 1350 mm -Abrasive belt: oscillating -Drive: 11 kW -Speed: Frequency controlled -Sanding belt dimensions: 2620 x 1350 mm -Max. workpiece clearance height: 140 mm -Sanding belt unit: height-adjustable (conveyor belt fixed height) -Machine dimensions: 2210/2320/H2310 mm -Machine weight: 4500 kg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0-001-747-312, Wide Belt Sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, Year 1991 TECHNICAL DATA Maximum working width: 1,100 mm Maximum working height: 150 mm Abrasive belt width: 1,110 mm Abrasive belt length: 1,900 mm 1st Sanding Unit Profiled steel contact roller, D=200 mm Motor power: 15 kW 2nd Sanding Unit Combined contact roller and pad unit Profiled rubber-coated contact roller, D=150 mm Air-cushioned sanding pad Motor power: 11 kW 3rd Sanding Unit Pad sanding unit with electronically controlled segmented pressure beam Element width: 30 mm Co-running / counter-running Infinitely variable sanding belt speed (frequency inverter) Digital sanding belt speed display Motor power: 11 kW - Conveyor belt with continuously variable feed, 3 - 15 m/min - Vacuum table / vacuum clamping device, 11 kW - Rotating cleaning brush: 0.75 kW - Digital display of sanding height - Infeed roller table MACHINE DIMENSIONS Total length: 3,200 mm Total width: 1,850 mm Total height: 1,900 + 175 mm (extraction nozzle) Bjdpfxsyt Nvyj Ammedc Total weight: 4,100 kg