Used Wide Belt Sanding Machine for sale (71,527)

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Cgsdpfxjk Dpp Ss Acvjr Location: 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Cgjdpfx Ajytrf Rocvor Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Belt cleaning unit: for 2nd unit Cleaning brushes: Yes Suitable for lacquer sanding: Yes Vacuum conveyor: Yes Feed speed: infinitely variable from 2.5 to 13 m/min Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Grinding belt width: 1370 mm Grinding belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed: 2.5 - 13 m/min (infinitely adjustable) Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Storage location: Nattheim Cedpfx Ajytrfkscvegr

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Cgedpfx Acoya I Iuover Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal unit for sanding, among other things, veneer before lacquering. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm constant Workpiece thickness max.: 3–140 mm Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, including extraction device Feed speed: 4.5–22 m/min, adjustable Units: cross/longitudinal/brush Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Brush material: fibre 1. Cross sanding unit - Wear-free brake system - Pneumatic belt tensioning - Belt run monitoring - Pressure lamella belt system, intermittent belt cleaning device - Sanding belt dimensions: 4900 x 150 mm - Belt sanding speed: 12 + 24 m/s - Drive power: 13 / 17 kW 2. Longitudinal sanding unit Cjdoya I Riepfx Acvsgr - Infinitely variable electronic control of sanding belt speed via frequency inverter - Wear-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Belt control: infrared - Sanding belt in counter-rotation - Sanding belt dimensions: 2620 x 1350 mm - Belt sanding speed: 0.3 – 12 m/s - Drive power: 11 kW Graphical operating terminal for entering machine settings, including numerical thickness adjustment as well as fault source, workpiece passage, and feed speed display Electronically controlled pressure beam Roller spacing: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Weight approx. 5500 kg Space requirement approx. 2550 x 2675 x 2400 mm

Condition: used, Working width ca. 1.300 mm mm Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm engine 18,5 & 15 kW Codpfx Acsypwarovjgr Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts.

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Sanding width 1100 mm First unit with hard rubber calibrating roller Cgodpoyy Nnkefx Acvor Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Adjustable feed speed Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: good (used), Year of construction: 1989, HESS JUNIOR grinder year 1989, max. grinding width approx. 180 mm, height approx. 160 mm Cjdpeyw R I Hofx Acvsgr price 3,000 €

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Cedeyttyvjpfx Acvogr Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Cgodpfx Acsyvvr Uevsr Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Cgodpfxsyvvr Ie Acvor Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, OTT MEGAtronic 111 Wide-belt calibration and fine sanding machine 1st sanding unit: calibration roller unit 2nd sanding unit: electronically controlled segmented pad unit Working width: 1100 mm Feed speed: 5 + 10 m/min Sanding unit motor power: approx. 11 kW Cgodpfx Ajyw Rknocver Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: excellent (used), WIDE BELT SANDER Butfering 110cm Model – super 111L Sanding width: 1,100 mm 1 combination unit with steel roller The pad has quick raise/lower capability Cedjyymlyopfx Acvjgr 11kW motor, star/delta starter Two feed speeds Electric table adjustment Electronic table position display Oscillation with photocells Sander in very good condition, ready for operation Machine dimensions: width 180cm, length 185cm, height 200cm Weight approx. 1,500kg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 38947, Machine available at the end of March/beginning of April 2026 incl. extraction nozzle Workpiece thickness: 3 - 150 mm Feed speed: 4/8 m/min Abrasive belt oscillation contactless (photo-electric) Cedpfeyrtriex Acvjgr - 1st unit (calibrating) Drive motor: 11 kW Steel sanding roller D=140 mm Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Abrasive belt grit compensation Extraction nozzle D=180 mm - 2nd unit (calibrating/fine sanding) Drive motor: 11 kW Sanding roller hardness approx. 90° Shore Abrasive belt grit compensation 2 pcs stationary and flexible contact air shoes Workpiece infeed control Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Extraction nozzle D=180 mm - 3rd workpiece cleaning brush Extraction nozzle D=140 mm Feed table pneumatically adjustable (spring-loaded/fixed) Front and rear table extension

Condition: good (used), Year of construction: 1988, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 32055, Wide belt sander - Veneer sanding - Solid wood - Intermediate lacquer sanding Cedpfx Acsyv H Akevsgr With 2 sanding belts: - 1st belt: cross sanding - 2nd belt: longitudinal sanding with segmented pressure beam The machine is very well maintained and in good, ready-to-operate condition.

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Platen width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with steplessly variable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 roller conveyors (each with 2 rollers) at infeed and outfeed - 1 extraction port, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - No valves - No photoelectric sensors - Not sensitive to dust - Energy-efficient, eco-friendly system - Since 2008 this machine model with the mentioned system has been running continuously without lateral belt runoff!!! - Includes Unitek belt motor 14.7 kW instead of 11 kW (upgrade) - Includes Unitek pneumatic platen with control synchronized to feed speed Cjdpow E Ty Uefx Acvegr Availability: short notice Stock location: Saxony-Anhalt

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW Cgjdpfxex Rdf Ss Acvsr From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: used, OTT Comet-2 1100 Wide belt sander Sanding width 1100 mm Machine is untested Service is recommended No warranty / No guarantee Ex stock Lieboch NET price € 1,900.00 Cgedpoywiyzsfx Acver

Condition: excellent (used), Wide Belt Sander SCM sandya 7 Csdjyx Dvyspfx Acvsgr Sanding width: 1100 mm 1st unit with metal calibration roller, 15 kW 2nd combination unit with rubber roller and pad, 15 kW Minimum electrical protection: 32A Pad with quick lift and drop function Pneumatic oscillation Variable feed speed Electric table height adjustment Table position display Pneumatic feed belt centering Robust sander, excellent sanding quality

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0-001-747-312, Wide Belt Sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, Year 1991 TECHNICAL DATA Maximum working width: 1,100 mm Maximum working height: 150 mm Abrasive belt width: 1,110 mm Abrasive belt length: 1,900 mm 1st Sanding Unit Profiled steel contact roller, D=200 mm Motor power: 15 kW 2nd Sanding Unit Combined contact roller and pad unit Profiled rubber-coated contact roller, D=150 mm Air-cushioned sanding pad Motor power: 11 kW 3rd Sanding Unit Pad sanding unit with electronically controlled segmented pressure beam Element width: 30 mm Co-running / counter-running Infinitely variable sanding belt speed (frequency inverter) Digital sanding belt speed display Motor power: 11 kW - Conveyor belt with continuously variable feed, 3 - 15 m/min - Vacuum table / vacuum clamping device, 11 kW - Rotating cleaning brush: 0.75 kW - Digital display of sanding height - Infeed roller table Cgodsyt Nvyspfx Acvor MACHINE DIMENSIONS Total length: 3,200 mm Total width: 1,850 mm Total height: 1,900 + 175 mm (extraction nozzle) Total weight: 4,100 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, total width: 1,300 mm, working width: 13,000 mm, overall weight: 14,000 kg, WIDE BELT SANDING AND CALIBRATION MACHINE Technical Details: Working width: 1300 mm Maximum workpiece thickness: 150 – 4.0 mm Abrasive belt dimensions: endless mm Machine dimensions LxWxH: 4.8 x 2.7 x 2.35 m Drive power: 219 kW Year of manufacture: 1992/2004 For woodworking! Additional features: - Pneumatic belt tracking - Height adjustment via handwheel - EMERGENCY STOP switch - Sanding drum adjustment - Belt tensioner - Roller conveyors (infeed and outfeed, each L: 2800 x W: 1700 mm with 6 rollers each), motor driven - Operation via control panel - Minimum/maximum workpiece thickness: 4.0/150 mm - Sanding belt width: 1300 mm (endless belt) Cedpfjyy Dh Ejx Acvogr - Sanding belt support length x width: 1700/1350 mm Including roller track before and after machine!

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: completely checked + serviced, incl. new feed belt Features and technical specifications: - Incl. combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating cleaning brush at the machine's outfeed side - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of the lateral belt position for even belt wear - With roller table at infeed - With digital display unit for the electric motor-driven workpiece thickness adjustment - With additional veneer sanding beam - With 2x spare sanding shoes - Sanding width: 1350 mm Cgodpewka T Sofx Acvor - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - Extraction connection 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Pictures show the machine in unrefurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5211291, feed rate X-axis: 16 m/min, grinding width: 1,350 mm, power: 15 kW (20.39 HP), grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Abrasive belt length: 2,620 mm Workpiece thickness: 3 to 160 mm Feed speed range: 3 – 16 m/min (infinitely variable) MACHINE DETAILS Cjdeyx Et Topfx Acvsgr Motor power: approx. 15 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,500 x 2,500 mm Machine weight: approx. 4,300 kg EQUIPMENT Cross unit for intermediate lacquer sanding Combination unit (roller + sanding pad) Electronic segmented sanding pad for precise surface finishing Finishing brush for perfect end results Ionization device for dust neutralization Dust extraction with propeller fan for a clean working environment Touchscreen control for user-friendly operation Calibrating and fine sanding in a single pass High flexibility due to multiple units Robust construction for industrial use Ideal for processing lacquered, veneered, and solid wood panels Note: The above data is taken from the manufacturer’s brochure or documentation and may differ from actual values.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design Cedpfxoyub R Ej Acvjgr 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm Cgedpfx Ajvdtxiecvor - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts