Used Welding for sale (5,552)

Condition: ready for operation (used), Two identical welding rectifiers are available, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible. Hedpszukrwjfx Al Tsnr

Condition: used, Ultrasonic welding machine, see images. Hodpfx Aezcvuhjl Tsnr

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) Hodpfsy N Duqsx Al Tenr - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. Hedpfx Alszqc U Ao Tsnr No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Hnjdjzqc Aaepfx Al Ter Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 15,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Hsdpfxozp Dzns Al Tjnr The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Plate size: 1500 x 1500 mm Hodpfszn I T Sex Al Tjnr Plate height: 100 mm Table height above floor: 950 mm Material thickness, approx.: 11.5 - 13 mm Bore diameter: 16 mm Weight, approx.: 397 kg

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Hnjdpfx Alezrupzj Tor Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036

Condition: excellent (used), pneumatically operated, water-cooled spot welding gun Manufacturer: DALEX, Type 3329 Nominal power at 50% duty cycle: 25 kVA Secondary short-circuit current: 17 kA Electrode force: 440 daN Arm reach: 350 mm Arm spacing: 300 mm with double-acting cylinder, long stroke 60 mm, pre-stroke 40 mm, working stroke 0-20 mm with universal joint suspension and mounting bracket 10 m connection cable and control cable with Harting connectors for connection to: Auxiliary control unit B 200 Hnjdjzruklepfx Al Ter

Condition: excellent (used), Year of construction: 2019, Equipment: foot remote control, Load capacity, horizontal/vertical: 100/50 kg Speed, continuously adjustable: 0.6 - 6 rpm Hnjdpfjznvp Ujx Al Tor Electrical connection: DC 230 V Space requirement: 470 x 400 x 350 mm Weight: 17 kg

Condition: used, Year of construction: 2002, Cloos – Robotic welding system with 2 robots and a swivel positioner for MIG welding with a TEKA smoke extraction system. Robot type: ROMAT 310 Number of axes: 6 Payload: 10 kg Repeatability: ± 0.1 mm Working range (spherical): approx. Ø 4100 mm Control system: ROTROL II (one programming handheld device is defective) Mechanical torch cleaning: CMR Welding power source: GLC 353 Quinto Profi Wire feed unit: CK 78 A/R Wire feed system: DUO – DRIVE Connecting hose package: 3.5 m Welding torch: MRW 3802 Hnjdpfxozrux Aj Al Tsr Welding torch holder: with integrated collision protection Two-station workpiece positioner: HWR-3KDP 5.000 Load on the rotary table, one-sided: 5000 N Load on the rotary table, two-sided: 3000 N Torque for station change: 2900 Nm Torque for rotary table: 800 Nm Diameter of rotary table: 400 mm Clamping length: 4000 mm Max. speed of rotary table: 60° / sec Smoke extraction system: TEKA cartridge filter system / Type TK-ZPF-4-40-DP with extraction hood 2300 x 4800 mm Year of manufacture of the system: 2002 Certificates of conformity are available.

Condition: used, Year of construction: 2022, operating hours: 6,731 h, functionality: fully functional, machine/vehicle number: 20804731, type of input current: three-phase, overall weight: 1,695 kg, input voltage: 400 V, total width: 3,405 mm, total length: 3,900 mm, total height: 1,310 mm, volume flow: 29,000 m³/h, space requirement height: 1,310 mm, space requirement width: 3,405 mm, space requirement length: 3,900 mm, filter area: 540 m², suction capacity: 29,000 m³/h, compressed air connection: 4 bar, power: 45 kW (61.18 HP), input frequency: 50 Hz, transport length: 3,900 mm, transport width: 3,405 mm, Plymovent MDB-36 PRO central extraction system for welding fume and dust extraction. Year of manufacture: 2022, used. For sale is a complete central extraction system consisting of a filter unit, fan, frequency converter, piping system, extraction arms, spark arrestors, shut-off dampers, sensors and other accessories. The system will be sold as a complete package according to the scope of the offer. Technical data: - Manufacturer: Plymovent - Type: MDB-36 PRO - Year of manufacture: 2022 - Filter area: 540 m² - Extraction volume flow: approx. 29,000 m³/h - Fan power: 45 kW - Weight: approx. 1,695 kg - Dimensions: approx. 3,900 x 3,405 x 1,310 mm - Filter cartridges cleaned with compressed air - Frequency converter included Scope of supply: - MDB-36 PRO filter unit - 36 filter cartridges CART-PTFE/15 - 45 kW fan in soundproofing box - Frequency converter VFD-45 - Pressure sensor PT-2500 - 2 x SparkShield-500 spark arrestors - Piping system - 7 x KUA-160/4H extraction arms - ERC-5.8 extraction rail with support consoles - Automatic shut-off dampers - Switching devices and sensors - Exhaust/recirculation switchover - Louvre silencer - Other accessories according to the scope of the offer Inspection possible by appointment. The system is sold in its current condition. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. Sale in current condition. Hnodpfxoztmw To Al Tsr Note: The system is currently disassembled and not connected. Before being taken out of service, the system operated perfectly and without any known functional faults. An inspection is of course possible, but a demonstration under power cannot be carried out at present. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. The information on documentation and certification, operating hours and machine/vehicle number will be supplemented and provided later. If you have any questions or are interested, please send us a message. We will gladly provide further information and additional pictures upon request.

Condition: good (used), functionality: fully functional, Weld edge former - Italy Hnodpszutnujfx Al Ter

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, overall weight: 875 kg, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, We offer this as new Donaldson DFPRE4 SPKTRP welding, plasma or laser smoke suction unit, year of construction 2025. Never used in production only used for demo. Fully assembled with pre-wired fan and controls. Model: DFPRE4 SPKTRP Serial number: 19318603 Sequence number: 01 Manufacturing date: 12-2025 Voltage: 3×400 V Power: 5.5 kW Frequency: 50 Hz Phases: 3 Net weight: 875 kg Hsdpfey T Ipyjx Al Tjnr Control timer part number: AM2155001 Control timer input: 400 V~ Control timer output: 24 V= If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, 1 unit of BRANSON 8100 ultrasonic welding machine including table Color: as shown in the pictures, according to the images and inspection Condition: used Hnedszqcm Eepfx Al Tor

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Hjdpfxsnvfduj Al Tjnr

Year of construction: 2002, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Hodsnvfdqspfx Al Tsnr

Year of construction: 2011, condition: ready for operation (used), System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h. Hedpogqkpmofx Al Tenr

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Hedoqu Ubuopfx Al Tenr

Year of construction: 1990, condition: ready for operation (used), With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. Hnedpfx Aoq Ttz Njl Tjr

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Hodpfx Asiknv Esl Tenr

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Hnodpfx Aedqzbrjl Tjr Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Image on the right) 3 m extraction arm Application area Medium amounts of smoke/dust Regular use Benefits Low need for repositioning the extraction hood Contamination-free filter change Safe operation thanks to rotary field detection High cost-effectiveness due to long filter service life Features Safe operation through filter monitoring Extraction hood can be rotated and swiveled 360 degrees Hjdpodqzcvefx Al Tjnr Start/stop automatic (optional) Workplace lighting (optional) Technical data Process: 2-stage Filter type: Disposable filter Filter area: approx. 20 m² Separation rate: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filters: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 3 m Diameter of suction connection: Ø 150 mm Power connection: 3 x 400 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Condition: good (used), Versch Demmler welding table, also available individually with numerous accessories. 3 pieces, 2000x1000 mm Thickness: 200 mm, hole spacing: 100 mm Table extensions: 1500 x 200 mm, 3 pieces Table extensions: 1000 x 200 mm, 2 pieces 2 carts with clamps, locking pins, and more. Hsdpfoy Hf Ndsx Al Tsnr

Year of construction: 2013, condition: used, machine/vehicle number: S0541C0081, Performance: 13.5 kVA, TRUMPF TruDisc 3001 fiber laser, serial number: L3211M0613S, year of manufacture: 2013, laser power: 3,000 W, power: 20 kVA, separate RITTAL control cabinet, with RIEDEL cooling unit, control unit, 2 processing stations, recorded operating hours (November 2025): 71,954 h, laser on time: 55,034 h. Hedjzqzcxspfx Al Tsnr