Used Welding Transformer for sale (6,150)

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Godexaal Repfx Aivjbu Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Year of construction: 2021, condition: used, NEW PRICE: approx. 110.000€ KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20Kg payload External axis module for coupled rotary axis, mathematically coupled Kuka ArcTech Basic package Level 2 advanced TouchSense technology to minimize component tolerances Kuka Wiresense module During oscillation, the voltage is measured by the power source and the welding path is the welding path is shifted if the component warps. * Function only for fillet welds incl. Lorch S5 SpeedPulse XT welding unit incl. automatic torch cleaning station *Cutting device *Cutter Gsdpfxswgn Dwj Aivobu *Welding cut-off spray

Condition: good (used), wire electrode, welding wire, welding wire -Manufacturer: Elgar, started roll of MAG wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: mm -Weight roll: 10.1 kg Gbodezzqlkopfx Aiveu

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of cooling: water, Equipment: cabin, For sale is a ready-to-use, compact, plug-and-play welding cell: OTC Easy Arc MIG/MAG 3.03. This system combines precise robotic technology with a high-performance, high-end welding power source and a fully automatically controlled horizontal rotary positioner. It is ideally suited for the automated, cost-effective production of small and medium-sized series. The entire cell is mounted on a stable base frame with a welding table/perforated plate and can be easily integrated into your production process. Technical highlights & components: Robot FD-B6: Highly dynamic 6-axis articulated arm robot, optimized for arc welding with internal cable routing (6 kg payload). Controller FD11: Modern robot controller for precise path guidance, including an ergonomic teach pendant for quick programming. Welding power source Welbee Inverter P400: Pulse welding power source (400 A) for spatter-free welding of steel, stainless steel, and aluminum, even at high welding speeds. Easy Arc PB250 Positioner / Horizontal Rotary Table: Fully controlled additional axis (up to 250 kg payload) for precise workpiece rotation, which enables welding in the optimal weld pool position, even with complex components. Safety concept: Complete enclosure including welding protection viewing windows and CE-compliant safety technology for direct use in a workshop. Condition & scope of supply: The system is in very good, fully functional, and ready-to-use condition, as it has been used only rarely. Scope of supply: Complete welding cell as described, including welding torch equipment, cable package, and documentation. The system is available immediately and can be inspected under power after consultation. Technical data at a glance: Manufacturer: OTC DAIHEN Europe GmbH Model: Easy Arc MIG/MAG V03.03 Year of manufacture: 2024 Power connection: 400 V / 50 Hz B2B sale with exclusion of all warranties. Subject to prior sale. Net price plus VAT ex Philippsburg. Loading can be arranged on-site. Components: Gsdpfx Aozvqunoivebu Robot welding cell as shown OTC welding robot Easy Arc MIG/MAG 1.03, robot FD B6 Easy Arc PB250 (Move) programmable positioner for automatic component alignment Controller FD11 Welding machine Welbee P400 Additional equipment: Water cooling If you have any questions or require further information, please send us a message or call us. An inspection and demonstration are possible at any time.

Condition: used, Technical details: Gbodpfx Aez Dt S Njiveu power consumption: 205 A total power requirement: 13,6 KVA

Condition: used, Technical details: welding current: 500 A Gjdpfjz Dt Tgox Aivobu Length: 590 mm height: 430 mm connection voltage: 400 V open-circuit voltage: 65 V capacity in kVA: 20,1 KvA protection class: IP23S weight of the machine approx.: 85 kg dimensions L x W x H: 0,60 x 0,44 x 0,44 m Kemppi FastMig KM 500 – MIG/MAG Welding Power Source The Kemppi FastMig KM 500 is a powerful industrial MIG/MAG welding power source designed for professional welding applications in metal fabrication, mechanical engineering, production and maintenance. With a maximum welding current of approximately 500 A, the KM 500 is particularly suitable for demanding welding work and applications requiring high welding performance and a high duty cycle. The power source is designed as part of the modular Kemppi FastMig system and can be combined with suitable Kemppi wire feeding units, such as the FastMig MSF series. The modular design allows the power source and wire feeder to be positioned separately, making the system suitable for both workshop use and larger workpieces. Typical applications: steel construction, mechanical engineering, heavy fabrication, repair and maintenance, production welding and general industrial MIG/MAG welding. *

Condition: used, Technical details: current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Machine not tested, on sale as is! i.D. Godpfx Asu Nwxbsivebu *

Condition: used, Technical details: Gbedeu Nwxzjpfx Aiveu power consumption: 2,3 kVA open-circuit voltage: 56 - 198 V protection class: IP 44 weight of the machine approx.: ca. 35 kg dimensions of the machine approx. HxWxD: 0,4x0,3x0,27 m equipment: - incl. earth cable and 3 pcs bolt taper for dia 2x 5mm and 1 x 6mm tested functional *

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition Gbsdpfed N E Rvjx Aivju The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: new, throat depth: 500 mm, – Capacity 35 kVA – Pneumatic – Throat depth 500 mm Gbodpex N Nfuofx Aivou – PX1700ECO control – Documentation – 400V

Condition: used, Year of construction: 2009, Transformer Manufacturer: SGB Type: DOTUL 400 H/20 Year of manufacture: 2009 Rated power: 400 kVA Rated current: 550 A Voltage ratio: 24.0/1.1 kV Rated frequency: 50 Hz Protection class: IP54, operating condition DB Connection group: Dyn 5 Cooling: ONAN Insulating fluid: Nytro 4000X Oil volume to be drained at +20°C: 3.8 l Gedpfsz Atgaex Aivsbu Total weight: 1,600 kg Oil weight: 0.300 kg 51026ä

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. Gsdpfoz N Am Ujx Aivebu The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 95 kg, input voltage: 400 V, volume flow: 1,100 m³/h, pressing: 2,250 Pa, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Equipment: type plate available, KEMPER ProfiMaster IFA welding fume extraction system – year of manufacture 2018 – 400 V Manufacturer: KEMPER Model: ProfiMaster IFA Year of manufacture: 2018 With adjustable 3m arm For sale is a used, fully functional KEMPER ProfiMaster IFA welding fume extraction system. This unit is ideal for extracting welding fumes and grinding dust directly at the source and is designed for professional use in workshops and metalworking facilities. The system is in good condition. The filter was replaced on 10/06/2025, making the unit immediately ready for use. Technical data: Airflow rate: 1,100 m³/h Power supply: 400 V / 50 Hz Motor power: 1.1 kW Rated current: 2.3 A Maximum vacuum: 2,250 Pa Protection class: IP42 Control: 24 V Weight: 95 kg Continuous duty cycle: 100% IFA-certified design Features: Godezg T A Aepfx Aivobu 3m arm length Mobile design Filter monitoring Easy filter replacement via maintenance flap Robust industrial design Ideal for welding workstations Condition: Used Technically flawless Filter replaced on 10/06/2025 Safety inspection valid until 2026 (according to inspection sticker) All information is provided without warranty.

Condition: used, Year of construction: 2006, functionality: unexamined, High-frequency welding machine ERKA (06-016-101) FIAB HF generator 8 kW, model P-8 GF with accessories Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us. Gbsdpfx Aezud Aijiveu

Condition: used, Year of construction: 2022, Manufacturer: Herrmann Ultraschall (Herrmann Ultrasonics) Machine type: Ultrasonic welding machine Model: HiQ G1 Dialog 20/2400 LF Serial number: 20.087/21 Year of manufacture: 2022 Generator power: 2400 W Operating frequency: 20 kHz Welding force (at 8 bar pressure): Gbodeznvcnjpfx Aivju minimum: 30 N maximum: 2490 N Working stroke: 150 mm

Condition: good (used), Flange connection, V-flange, pipe flange -Pipe flanges/welding neck flanges: 81 pieces -Type: DIN EN1092-1 16 different versions see photos / parts list Godpfx Aioq Rhaqsvebu -Material: P235 GH -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H200 mm -Weight: 467 kg

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Gbsdpfx Aioxaac Asvsu Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. Gsdpsgvkdbsfx Aivebu The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate Gbodpfx Aogvkgteivou - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad Gbsdpogvkktefx Aivju table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: Gbjdpoh Evt Uefx Aivju - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, Year of construction: 2026, load capacity: 2,000 kg, Column Lifting Rotating Device with 2-Ton Capacity Gsdpfxewihxae Aivobu Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Movements Load Capacity 2000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Drive Motor Torque 3100 N-m Clamping Plate Diameter 500 mm Rotating Motion 0.55 kW 2 to 10-Ton Capacity Available Upon Request

Condition: new, Year of construction: 2026, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Gjdpfxjwak U Ee Aivobu Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request

Condition: new, Year of construction: 2026, overall weight: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Gsdsx Thq Ropfx Aivebu Speed 0.5 rpm Clamping Plate Diameter 600 mm Rotation 0.75 kW Torque 5180 N-m 2 to 10-Ton Capacity Available Upon Request

Condition: used, Technical details: welding current: 250 A Length: 815 mm Gbsdpfx Aez Dt S Aeivou height: 390 mm connected load: 4,0 kVA connected load: 4,0 kW open-circuit voltage: 16 - 32 V machine weight approx.: 104 kg