Used Welding Rotator for sale (12,780)

Condition: new, table diameter 600 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,8 U/min max. torque on the faceplate 450 Nm table pass 80 mm welding current 500 Ampere total power requirement 0,18 + 0,18 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. Blsdpfx Aofv Awzofmsp • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. Bsdefv Aw Nspfx Afmolp • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 2,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. Bledjfv Aw Tepfx Afmop • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere Bledpfx Afjfv Axmomep total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable Bodpfefv Aykjx Afmjlp - 500 amps welding current transmission

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW Bedpfx Afsfv Ayyemolp welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 780 mm table load 1,0 t swivelling range 0 - 135 Grad turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1000 Nm welding current 500 Ampere Bedpfx Afsfv Ay Somelp including remote control and welding current transmission.

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm welding current 700 Ampere Bjdpsfv Azhjfx Afmjlp including remote control and welding current transmission.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Bljdpfegp Dymjx Afmop Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, number 27 Positionen weight 52 kg condition neu 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Bljdpsgp Dyuofx Afmep Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs.

Condition: new, table diameter 350 mm table load 100 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t Bodpfx Ajupw Nxofmjlp dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: new, number 31 Positionen 22 mm condition neu Blsdeulbb Repfx Afmjp weight 43 kg Set 1 33-piece, 22mm system, consisting of: Clamps: 4 x 220610.1 Clamps 2 x 220630.1 Bolt: 12 x 220511 Stop: 4 x 220410.N Stop: 4 x 220420.N Angle: 2 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport.

Condition: new, table load 110 Kg table load capacity 55 kg. vertikal table diameter 250 mm hollow spindle diameter 65 mm chucking diameter 200 mm swivelling range Grad turning speeds 0 - 8 stufenlos U/min total power requirement 0,15 KW weight of the machine ca. 65 Kg dimensions of the machine ca. 0,5 x 0,53 x 0,6 m Welding turntable with - large passage mm - Footswitch - tilt/swivel by hand - Speed infinitely adjustable - 250 amp welding current transmission Blsdpfxeulbc Uj Afmep - Bore in faceplate mm. Demonstration machine documentation only in English.

Condition: new, table diameter 650 mm table load 600 Kg swivelling range 90 Grad turning speeds 0,2 - 3,0 U/min total power requirement 0,55 + 0,4 kW weight of the machine ca. 0,28 t Welding rotary tilting table Blodoulbgaspfx Afmsp - Remote control - 2 x welding current transmission

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Motor power: 1,1 + 1,5kw Table tilt (Motorized): Tilt speed 0.67 rpm Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Bodpeuf Nm Hefx Afmslp Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, table length 1590 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Bledpfsh Dqb Dsx Afmjp Pallet truck is not included in the scope of delivery

Condition: new, Protection level 4 - 12 M Power supply 2 x CR2032 Bodpfx Afsgu Ey Hjmjlp weight 460 Gramm dimensions 250 x 270 x 230 mm

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate Blsdegvkikspfx Afmop - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 3,2 U/min Bledel R Nnvjpfx Afmep spindle bore 65 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. unused still in original packaging. Bodpfx Afstkuvxsmolp

Condition: new, table length 2900 mm table width 1200 mm table height 900 mm table load 3000 Kg Bledpfod Iinasx Afmop weight of the machine ca. 0,77 t dimensions 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 2000 mm table width 1000 mm Blsdsd Iincjpfx Afmep table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1400 mm table width 1400 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,5 t dimensions 1,4 x 1,4 x 0,9 m Bledpjd Iindofx Afmep Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm Bsdpfx Asmhm Auefmelp weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set Bjdpfx Asxwzd Nefmelp