Used Welding Manipulator for sale (5,591)

Condition: used, From company closure: Esab LAW 400 The unit has been function tested! 350 amperes output at 60% duty cycle Welding range 30–350 amperes 4-roll wire feed Water cooling 2/4 stroke Torch 4 meters + wire + ground cable Without pressure regulator-- Dimensions in mm approx. 1400x630x1020 Bsdpfx Aexq Rdfedxoww

Condition: new, Design: Anti-glare cassette with colorfast filter and selectable protection levels from 4/9–13 Steplessly adjustable sensitivity range "super High" Opening delay adjustable via control knob Maximum ultraviolet/infrared protection across the entire protection level range Reflection-free cover lens and inner protective lens Energy-efficient electronics with super-sleep mode for approx. 3,000 hours without battery replacement Bwodpfjw Rntfex Adxow

Condition: not inspected (used), functionality: unexamined, pressing force: 100 t, table width: 460 mm, table length: 460 mm, type of input current: three-phase, travel distance Z-axis: 570 mm, pressure: 400 bar, input voltage: 400 V, 1 Hydraulic Press MUNARRIZ ; Maximum pressure: 400 bar Table dimensions: 460 x 460 mm Presser diameter: 180 mm Cylinder diameter: 180 mm Approximate vertical stroke: 570 mm Manual drive Bsdpext Hzfofx Adxeww Hydraulic pump IHBER; YOM: 2024 Included a J.ANGEL BACAICOA weightless manipulator Power of the pump motor: 15 kW Dimensions: 2900 x 2300 x 3000 mm Approximate weight: 1500 kg The machine has been working until May of 2025. Actually is dismounted and can not be tested. No warranty. The machine was reformed on 2024. All the hydraulic group was replaced by a new by the company IBHER in 2024 If the potential purchaser wants to see the machine operating this has a cost of 1.500 Euros ( Taxes not included )

Condition: good (used), Year of construction: 2000, BAS040 welding unit for bandsaws up to 40 mm width. Includes cutting shears and polishing device. See pictures. Bodpfxextgcij Adxjww

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Bwjdpfx Adexr Nwaexjw

Condition: used, Year of construction: 2008, table diameter 1100 mm table load 1,2 t swivelling range 0 - 135 Grad turning speeds 0,15 - 3,4 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1300 Nm Bwodoxpi Akopfx Adxsw Dimensions (LxWxH) 2,8 x 1,6 x 1,6 m Welding turntable with new remote control • Self-locking gear system, no pre- or post-running under eccentric loads • Hydraulic height adjustment allows for virtually unlimited positioning • Frequency-controlled, infinitely variable speed of the rotary table

Condition: used, machine/vehicle number: 23500716, From business liquidation: Pulse welding system Kemppi Pro 4200 Evolution. The unit has been function-tested! 420 amperes power at 80% duty cycle. Welding range: 10-420A. Wire feed case Promig 530. MXE MLS control. 4-roller wire feed. Water cooling. 2/4-stroke operation. Torch 4 meters + wire, ground cable and pressure regulator. Dimensions in mm approx. 1260x440x1020. Bjdpfx Aoxq Rcuodxoww

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Bwedpfxsgvkc Nj Adxew The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Year of construction: 2015, condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition - Year of manufacture: 2015 - 3 units available - CE declaration of conformity given Bwsdpjvvw Eksfx Adxjw - Condition: Incoterms EXW CH-4528 Zuchwil - Loading options available

Condition: new, Year of construction: 2025, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. Bsdpevvx Hpofx Adxoww All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: excellent (used), Esab Fabricator EM 401i Bedpfx Adexq N D Rexsww Technical Data: Water-cooled MIG/MAG inverter Continuously adjustable with 400 A output Duty cycle: 400 A at 60% 310 A at 100% Digital display on the power source 4-roll wire feeder Faricator Feed 304 2-meter intermediate hose package Includes earth cable, pressure regulator, and one spool of wire Weight: 107.5 kg Dimensions approx. 1300x500x1020 mm

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m Bwodpfsgvkktex Adxew The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, Year of construction: 2025, table length 1000 mm table width 2000 mm table height 200 mm weight 650 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Bwodpfx Aeuia Naedxsw Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t Bwedpoibw Sxefx Adxjw - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table Bodouia I Nspfx Adxjww

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Bwodpfx Adsgvkikexsw Start-stop.

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. Bwjdpfegvkfvsx Adxjw The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t Bodegvkfyspfx Adxeww The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW Bwjdpfxogvkgto Adxow The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg Bjdpfxjgvkk Nj Adxeww table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any Bwsdpfx Adsh Evt Uoxew integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Year of construction: 2021, condition: used, current capacity - kVA number of controlled axis - workpiece weight - kg Used Lorch Cobot Welding Package CB3 series incl. PushPull torch + rotateOne rotary positioner Cobot operating hours: 334 hours. Features/Description: - Optimal for aluminum applications - Complete set of Cobot and Lorch welding equipment - For mounting on welding tables with hole size 16 or 28 (welding table not Bjdpfxorr Amie Adxeww included). package included) - Welding system with special cobot interface, full-process equipment and Cooling system with increased cooling capacity, can also be used as a manual system if required - PushPull Cobot burner with 3.5 m hose package length and dual-circuit cooling - Burner original equipment set for aluminum 1.0/1.2 mm - Boom boom with balancer and line holder for optimal hose parcel handling *Technical data Welding range (in A) 25-400 ED 100% 40°C (in A) 320 ED 60% 40°C (in A) 350 ED at max. current 50% - RotateOne rotary positioner with 200mm 3-jaw chuck - integrated into the cobot control (no additional control) *Technical data Rotation speed up to 90°/s Load capacity 120 kg Torque up to 45 Nm Tilt angle -10° to 90° (manual) Important: The machine offered is an incomplete machine according to Machinery Directive 2006/42/EC, Article 2g. A protective device in accordance with country-specific guidelines is required. The machine integrator therefore has to create all the necessary documents Additionally: (optionally available) - SIEGMUND welding table

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Bjdpfogvkc Tsx Adxeww The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm Bjdpfx Adjgvkf Djxeww - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes Bodpfogvq Hljx Adxoww - nitrided