Used Welding Fume Filters for sale (12,700)

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg Bljdpfxexaatne Aa Uod swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. Blodpjxaafqjfx Aa Usd - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive Blsdpswl Dptsfx Aa Usd -Version: Water-cooled -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m -Quantity: 1 piece available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Condition: used, functionality: fully functional, input voltage: 380 V, electrical fuse: 16 A, nominal power at 50% duty cycle: 4 kVA, continuous power (apparent): 6 kVA, We offer this used IDEAL BAS 20 butt / flash welding machine, year of construction unknown, for sale. Type: BAS 20 Serial number: 18292 Nominal power at 50% ED: 4 kVA Connection power: 6 kVA Blsdpex Saxdofx Aa Ujd Idle voltage: 2.8-4 V Maximum upsetting force: 0.25 Mp Welding thickness (steel): 3-50 mm Primary voltage: 380 V Frequency: 50-60 Hz Fuse rating: 16 A Number of steps: 5 Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2002, Spot and projection welding machine Tecna 4602N Nominal power at 50% = 16 kVA Welding control TE 90 Mark II Adjustable welding arm reach (up to max. 600 mm) Blodpsypapijfx Aa Ujd The manual for the welding control and operating instructions are available. The machine has an integrated pump for cooling the welding arms. The spot welding machine is in very good condition, cleaned and checked. The hoses for the cooling circuit are new.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10480407, No reserve price – guaranteed sale to the highest bidder! Bodpfx Aaoyn Ep Ss Ueld Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 300 x 200 mm Machine weight: 15 kg External reference: Lot 6/ Forster

Condition: not inspected (used), functionality: unexamined, total height: 1,200 mm, total width: 500 mm, total length: 700 mm, overall weight: 200 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 1,200 mm Bljdpeyn Eh Uofx Aa Usd Weight: 200 kg External reference: CES – Lot 87

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 67630799, total height: 600 mm, total width: 500 mm, total length: 550 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bljdoyn Dbmepfx Aa Usd MACHINE DETAILS Length: 550 mm Width: 500 mm Height: 600 mm Weight: 150 kg EQUIPMENT

Condition: not inspected (used), functionality: unexamined, total height: 1,100 mm, total width: 400 mm, total length: 500 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! Blodpfeyn A U Ssx Aa Ujd Placing a bid obligates timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 1,100 mm Weight: 30 kg EQUIPMENT Matching hose package External reference: CES - Lot 157

Condition: good (used), Year of construction: 1991, material Stahl weight 300 kg Bjdpsynmp Hefx Aa Ujld turning speeds 1400 U/min motor 75 kW The Höcker Polytechnik L 300 industrial blower, built in 1991, impresses with its robust construction and an impressive air flow rate of 7,200 m³/h. With a 7.5 kW motor and a speed of 1,400 rpm, it is ideal for extraction and conveying tasks in workshops, production facilities, and filter systems. The fan runs reliably, is designed for durability, and comes from a renowned German manufacturer. Perfect for anyone looking for a solid and powerful solution for air and material transport.

Condition: not inspected (used), functionality: unexamined, total height: 1,600 mm, total width: 600 mm, total length: 800 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Bodpfsynzyaex Aa Usld Dimensions (L x W x H): 800 x 600 x 1,600 mm Weight: 400 kg External reference: Pieper - Lot 141

Year of construction: 2022, condition: good (used), Test stand for filter testing, filter testing, filter test system, filter measurement system, filter test system -Manufacturer: Lorenz, Filter Test System Type FMP 03 with accessories Bsdpfjyk Ahwsx Aa Ueld -Filter holder: Type FH 143/149 -Individual components/accessories: see photos -Dimensions: 600/560/H975 mm / 640/460/H1130 mm -Weight: 142 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Kawasaki RA006L Robot with E-Controller Year of manufacture: 2022 Control unit: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consists of: Blsdpfx Aaeympvto Uod • Robot kinematics • Controller (10 m cable to robot kinematics) • Teach pendant (10 m cable to controller) Interfaces: • RS232 • 2x Ethernet (individually configurable) • 2x USB • 32 digital inputs / 32 digital outputs (freely assignable) • User interface on robot upper arm R-Series 12E / 8A / 2x air (10 mm) (The signals from the user interface are available in addition to the 32 inputs and 32 outputs.)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Kawasaki RA006L Robot E-Controller Year of manufacture: 2022 Control unit: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consists of: Blsdpeympvmefx Aa Uod • Robot kinematics • Controller (10m cable to robot kinematics) • Teach pendant (10m cable to controller) Interfaces: • RS232 • 2x Ethernet (individually configurable) • 2x USB • 32 digital inputs / 32 digital outputs (freely assignable) • User interface on the robot upper arm R series 12E / 8A / 2x air (10mm) (The user interface signals are available in addition to the 32 inputs and 32 outputs.)

Condition: good (used), Filter hose chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose -Ventilation hose: Exhaust hose with flange -Flange: Ø outside 290 mm, slightly curved Bledpfxjpyk Nfo Aa Uod -Length: 3500 mm -Number: 20 hoses available -Price: per piece -Weight: 1.6 kg/piece

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Bsdpfjxpxrhjx Aa Usld Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm Bjdpfx Asxpxrbea Uold weight of the machine ca. 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm Bsdpfxegp Dyms Aa Ujld height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t Bsdpjd Iincsfx Aa Usld dimensions 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Blodpfxjfv Ayks Aa Usd Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Bljdpfx Aajgxi Ebj Ued Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Blodpfogp Dyqex Aa Uod Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery Bedspk Iv Uspfx Aa Usld

Condition: new, table diameter 180 mm 10 Kg 5 Kg chucking diameter 65 mm turning speeds 2 - 20 stufenlos swivelling range 90 Grad Bjdpfoi Hg Iyox Aa Uold tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 18 Kg dimensions of the machine ca. 300 x 300 x 300 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: new, table length 1000 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. Bledpfx Ash Dqb Isa Ujd including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery