Used Weinig Powermat 2000 for sale (557)

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) Dksdpfx Absxb U Txo Aow 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. Djdpeyvgiajfx Ab Aokw The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Dkodpfju Damdox Ab Aow

Condition: like new (used), Year of construction: 2013, operating hours: 6,000 h, -max .work length:2500mm Dedpfxjz Rnk Ue Ab Aekw

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing Dksdpfxozwfxko Ab Ajw 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 3,000 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 142 mm, controller manufacturer: SIEMENS, controller model: WS 400-20, CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis stroke: 3,000–3,500 mm (version dependent) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Tenoning/slotting spindle quantity: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle motor power 1: 11 kW • Tenoning spindle motor power 2: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Profiling spindle quantity (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (flight circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Horizontal profiling unit (top) motor power: 3 kW • Horizontal profiling unit spindle diameter: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm Dksdszug Nrspfx Ab Aew

Condition: used, Year of construction: 1992, Weinig UNIMAT 17 A comb, 6 spindles + universal, with pneumatic feeder for long pieces, functional, used. Optionals: code 926030 Return belt from 5500 mm with stacking unit Dkjdpfx Absz I Thls Aew 4-piston pneumatic ejector code 926031

Condition: used, Year of construction: 2017, functionality: fully functional, We offer this used Weinig Automatic Stacker, model Deck Stacker, manufactured in 2017. Video of the machine in operation is available. Manufacturer: Weinig Model: Automatic Stacker Year of manufacture: 2017 Condition: Used Category ID: 164 Type ID: 2293 Machine type: Deck Stacker Weinig Stacker – in perfect condition! Weinig is a global leader in the industry. This is not a budget machine; it is a premium-class machine that retains its value and operates reliably for years. For sale: a compact Weinig deck stacker in very good condition. It is entirely in its original paint, unmodified, and well-maintained. Dkedpfjz N H Tfsx Ab Aew Key features: • Stacking length range: from 40 cm to 1.5 m • 4-5 layers per minute • Capability for herringbone stacking • Storage for spacers • Quick and easy adjustment of stacking dimensions • Additional milling wheel – can be mounted to push material off the line and onto a conveyor belt • The machine is in continuous working order Opportunity to view and inspect the machine in operation. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Weinig combiner machine, model PFA17N, grooved bench, 8 shafts (lower 4kW, right 4kW, left 5.5kW, right 4kW, upper 5kW, lower 4kW, universal 4kW, universal 4kW), used. Dkedsy S Acxspfx Ab Aew

Condition: good (used), Weinig EM 4 Dkjdpfx Aezcnwuob Aew

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Dedozdpc Tspfx Ab Ajkw Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 226-7342, working width: 210 mm, spindle diameter: 40 mm, overall weight: 2,400 kg, power of feed motor: 2,200 W, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 220 mm, input voltage: 380 V, number of spindles: 6, input frequency: 50 Hz, Equipment: motor brake, Selling a Weinig Profimat 22N with ATS control system. Lightly used, in good condition, fully functional. Spindle upgraded from 5.5 kW to 11 kW (2007). Includes Weinig precision adjustment gauge. Dkodpfx Ajz D Hp Uob Asw Accessories included, see photos. Forklift available for loading. If interested, a video of the machine in operation can be sent.

Condition: used, Year of construction: 1992, Spindle arrangement: bottom – right – left – top Planing width min./max. 8-180 mm Planing height min./max. 5 - 120 mm Length of infeed table: 2000 mm Feed rate: 8 m/min Feed rollers: pneumatic Infeed roller before the jointer Electric height adjustment of the feed beam Manual width adjustment via crank 4 planing cutterblocks, each with 2 knives 1 pre-jointer Fold-up safety guard Dodpfx Aoz Abtheb Aokw 4 dust extraction connections Total connected power approx. 18 kW Dimensions approx. L x W x H 3000 x 1000 x 1450 mm Weight approx. 1200 kg

Condition: used, WEINIG pot-type pendulum shaft for use in Weinig planing machines Dkodozrxlyspfx Ab Ajw Technical data: - Overall length: 266 mm - Diameter: 35 mm

Condition: used, 0704D64 HL3/1 as good as new Dodpozrxnuofx Ab Ajkw Technical data: - Clamping length: 240 mm - Spindle diameter: 40 mm - Overall length: 860 mm - Body diameter: 110 mm - Pulley diameter: 70 mm

Condition: used, Protective cover / lid / flap for a Weinig Unimat 23 SP planer or similar model. Dsdpfezrxu Uox Ab Askw Technical data: - Length: 1,150 mm - Width: 1,550 mm - Height: 1,100 mm

Condition: like new (used), Planer heads for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Technical data: - Cutter: Centrolock Z2 reversible cutter - Cutting circle (ø): 93 / 130 mm - Mounting: PowerLock HSK 85 - Length: 240 / 255 mm - Material: Steel Dksdpfszrx U Isx Ab Asw - Condition: As new

Condition: used, Planer heads for the professional, machine-based processing of solid wood, wood-based materials and other suitable materials. Dkedozryaxspfx Ab Ajw Technical data: - Cutter: Centrolock reversible cutter Z2 - Cutting diameter (ø): 93 mm - Mounting: PowerLock HSK - Length: 150 mm - Material: Steel

Condition: used, A set of spacer rings with a 10 mm keyway for use on various woodworking machines, in particular planers. Dkedpfx Aezryl Iob Asw Technical data: - Thicknesses: 40, 40, 20, 20, 10, 10, 5 mm - Bore: 35 mm - Flight circle: 50 mm

Condition: used, Second-hand control cabinet, a Weinig Unicontrol 10, suitable for use as a source of spare parts or for building a new control cabinet. Contents include, amongst other things: Siemens Simatic S5 Siemens EMG 45 Dkedpfx Abeztvt Dj Asw

Condition: used, Second-hand Weinig Unicontrol 6 control cabinet, suitable for use as a source of spare parts or for building a new control cabinet. Contents include, amongst other things: Dedpfx Abeztvt Re Ajkw Hilger & Kern brake unit Rathgeber ET 1000 transformer

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 108076, grinding wheel diameter: 40 mm, overall weight: 550 kg, Used Weinig Rondamat 960 Includes various grinding discs Shaft diameter 40mm Dsdpeztzrxofx Ab Ajkw

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, spindle diameter: 50 mm, type of input current: three-phase, input voltage: 400 V, number of spindles: 9, input frequency: 50 Hz, input current: 184 A, WEINIG Hydromat 23 - 9 heads, refurbished in 2020 Opre Annamária: Oh +36 20 949 4988: For sale: a WEINIG Hydromat 23, one of the most reliable machines for professional woodworking. The machine underwent a complete overhaul in 2020 at a German specialist service center and has been operating flawlessly ever since. Technical specifications: - 8 + 1 universal heads, total 74.5 kW (lower 11 kW, upper 11 kW, the remaining heads 7.5 kW, including one universal head) - Working width: 230 mm - Working height: 160 mm - Tool/spindle diameter: 50 mm - Year of manufacture: 2000, complete overhaul in 2020 at a German specialist service center The machine can be viewed and tested in operation by prior arrangement in Nagytarcsa, near Budapest, Hungary. Available as a separate option: with many planing heads, planing knives, accessories, and a dust extraction system. Dsdpfxeztpgws Ab Aokw Price: 59,000 EUR

Condition: used, functionality: fully functional, Raimann KS310 multi-blade saw with material handling system Max. cutting width: 310 mm Dedpfx Abjz Hi Swe Aokw Max. feed width: 650 mm Max. cutting height with multi-blade equipment: without pressure plate 120 mm, with pressure plate 105 mm Min. cutting height: 10 mm Min. workpiece length: 450 mm Chain width: 340 mm Saw mandrel diameter: 65 mm Arbor diameter: 80 mm Diameter of circular saw blade: 250-360 mm Saw mandrel speed: 3900 rpm Feed speed, continuously variable: 4–45 m/min Main motor: 37 kW Outfeed table with side discharge and material return to the operator Technical documentation and CE certificate Dimensions: 640x370x180 cm (H)

Condition: excellent (used), Year of construction: 2014, TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES TECHNICAL DATA Dksdpe Ad U U Eofx Ab Aow MAX. TOOL WIDTH: 330 MM EXTENDED (OPTIONAL): 460 MM WITH POWERLOCK: 322 MM TOOL RADIUS: 100 - 300 MM EXTENDED (OPTIONAL): 140 - 340 MM WITH POWERLOCK: 100 - 250 MM SANDING DISC DIAMETER: 125 - 200 MM SPINDLE RPM: 4600 RPM FREQUENCY CONTROLLED: 1500 - 4600 U/MIN