Leadscrew/feedscrew lathe/Commodor

WEILER Commdor B incl. neuer Digitalanzeige

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) Iedpfedzqb Eox Akpobb - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 320 mm, total height: 2,245 mm, total width: 1,340 mm, total length: 1,140 mm, table width: 240 mm, table length: 1,000 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 100 rpm, overall weight: 1,000 kg, working range: 650 mm, input voltage: 400 V, distance table to spindle center: 370 mm, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Drilling capacity in steel ----- 50 mm Milling capacity in steel ----- 25 mm Face milling capacity ----- 100 mm Longitudinal travel (X) ----- 585 mm Transverse travel (Y) ----- 185 mm Vertical travel (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Ibodpfega Twfsx Akpob Vertical motor ----- 2.2 KW Horizontal milling spindle ----- 60 ~ 1350 rpm (9) Vertical milling spindle ----- continuously variable 100-600 / 350-2000 rpm Spindle mount ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDED * DELTA frequency inverter * 3-axis digital readout SINO * Automatic longitudinal and transverse feed of the worktable * LED lighting * Cooling system * Deluxe control cabinet * Tilting milling head left/right 0 - 45 degrees * Rotating worktable * Various holders in a case

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Ibsdpfx Aezb U Epokpjb Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Ibodpfx Aju Uh U Ijkpjb

Condition: excellent (used), Year of manufacture: 1973 Distance between centers: 500 mm Distance between centers (vertical): 125 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 120 mm Spindle bore: 32 mm Spindle nose: Camlock D1-3 Spindle speed: 225 - 3000 rpm Tailstock quill: MK 2 Weight: approx. 930 kg Dimensions W x D x H: approx. 1473 × 730 × 1280 mm Condition: very good Accessories: see pictures Through hole in the chuck: 28 mm Collet system: Schaublin B32 Automatic feed: 4 - 260 mm/min Cuttable metric threads: 0.25 to 8 mm Cuttable inch threads: 112 to 3 threads per inch Ibedpfx Akozyyn Sepsb

Year of construction: 2006, condition: good (used), BF Tec milling machine Type: 7550C X-travel: 500 mm Y-travel: 300 mm Z-travel: 350 mm Iedpfx Akjncbndepsbb Bed: 240 x 800 mm Speed: 1750 RPM Spindle: ISO 40 Year: 2006 Digital measurement Jenix Dimensions: 125x125x200 cm LxWxH

Condition: used, Year of construction: 2002, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Type: Weiler Praktikant VC Precision Lathe Year of Manufacture: 2002 Condition: Used, very good, maintained and inspected according to Weiler's factory specifications, with inspection report. Technical Details: Turning diameter 250 mm Turning length 650 mm Center height 160 mm Swinging diameter over cross slide 320 mm Swinging diameter max. over compound slide 190 mm Main spindle: Speed range – main spindle 30 – 4,000 min/-1 Drive power – main spindle 10 / 6.0 kW Gear stages 1 Spindle nose: 5 / DIN 55027 Spindle diameter in the front bearing 70 mm Spindle bore 40 mm Usable bar diameter 40 mm Tailstock: Quill stroke 85 mm Quill diameter 40 mm Tailstock mounting MK 3 Feeds: Number of feeds 24 Longitudinal feed 0.02 – 0.63 mm/rev Cross feed 0.006 – 0.2 mm/rev Thread cutting: Metric 0.25 – 8 mm Inch 80-2 1/2" Module 0.25 – 4 mm Travel paths: Compound slide travel 150 mm Top slide travel 110 mm Swiveling movement 180 ° Total power consumption 15 kVA Machine weight approx. 1.0 t Ibodpfxozza Uzo Akpeb Space requirement approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine light – Documentation – Tailstock – 8x Machine feet – Coolant system