Used Water Cutting for sale (21,011)

Year of construction: 2012, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile Cjdoz A S Dnopfx Aqvsri -Type: G15035-DT -Drive motor: Siemens 2.2 kW -Funnel opening: 620 x 350 mm -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm -Weight: 192 kg

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm Cjdpfjz Rwk Rjx Aqvsri   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2014. It features an impressive X/Y/Z axes travel of 800 mm x 550 mm x 510 mm and U/V axes travel for tapering of 800 mm x 550 mm. The machine can handle workpieces up to 1300 mm x 1000 mm and 3000 kg in weight. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar Crodjz Hwnyspfx Aqvsi

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Crodpfxez Hxfye Aqvsi Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Csdjz Hxhuspfx Aqvjri Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Credpfxez Hxhzs Aqvsi Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Codpjz Hxlaefx Aqveri Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW

Condition: used, HERBOLD granulator type SMS 60/100 Crjdpfxsz Hxlmo Aqvsi Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width (optionally as open 3- or 7-blade rotor) Drive motor 110 kw Folding device with electric winch

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw Codpfx Aez Hxn Uoqvori

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 17,600 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Power: 5,000 W Steel sheet thickness: max. 20 mm Stainless steel sheet thickness: max. 15 mm Aluminum sheet thickness: max. 10 mm Cutting speed: max. 60/85 m/min Accuracy: ± 0.1 mm Table dimensions: 3,000 × 1,500 × 115 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 9,300 x 4,600 x 2,000 mm Crjdpfx Aoz Hxu Ujqvsi Total weight: 13,140 kg Operating hours Beam on: approx. 17,600 h Laser on: approx. 45,500 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine Csdez Rl Eiopfx Aqvjri - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode Crodsz Rl Taspfx Aqvoi - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: used, Year of construction: 2024, functionality: fully functional, This is a cutting machine manufactured by Scharfen, model ES 300, year of manufacture 2024. The machine has been inspected in our in-house workshop and is fully functional. This machine was an incorrect purchase; it turned out that a miter cutting machine was required. Therefore, it was only used for a short period. You will receive an invoice with VAT shown. The list price of the machine is €4,082 net / €4,857.58 gross. Our offer price is €2,932.77 net / €3,490 gross. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Inspected & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 580 x 635 x 420 mm Blade: 300 mm diameter, hollow ground, hard chrome-plated stainless steel, long cutting life. Cutting thickness setting: 0-25 mm (infinitely adjustable) Cutting length: 250 mm Cutting height: 210 mm Noise level: less than 70 dB (A) Grinding device removable Voltage: 400 V three-phase or 230 V single-phase Power: 0.6 kW Weight: approx. 51 kg Serial number: 2241096 Year of manufacture: 2024 Condition: used, inspected, fully functional Additional information: Large storage area for sheets Cedpfx Aqoz Ilm Tsvori Quick and easy to clean Extremely robust and low maintenance 100% stainless steel Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2025, condition: new, Festo water separator, size 12, 8005550, MS12-LWS-G-U-V Credpfxozqclzs Aqvsi 2 pieces, new and in original packaging!

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Control: Mazatrol preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads incl. 10 x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Credpfx Aqohturvsvsi Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Condition: like new (used), Year of construction: 2019, AMADA - LCG3015AJ – 2019, like new - Control system: AMADA - Fiber laser, 2100 W - Table size: 3000 x 1500 mm (x2) - Operating time: 300 hours - Documentation available Crodpfx Aeiv S Nqjqvei - Weight: 9400 kg - Operational Due to excessive administrative overhead (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. Crjdpsu Nwfujfx Aqvoi With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm Credpju Tp N Djfx Aqvoi - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 2 h, laser power: 20 W, laser wavelength: 355 nm, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: water, warranty duration: 12 months, shaft length: 355 mm, Equipment: cabin, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Exhibition machine, with approximately 2 hours of operation - No discernible signs of wear - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn on and start - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution Crjdpjflrnaofx Aqvoi - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start the engraving process Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Please also note our attractive leasing/hire purchase offers. Machine dimensions approximately: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 180kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 1 h, laser power: 30 W, laser wavelength: 1,070 nm, input voltage: 230 V, type of input current: AC, type of cooling: air, shaft length: 1,070 mm, Equipment: cabin, Laser engraving machine with 30-watt laser power - Exhibition machine / used demonstration unit with approximately 1 hour of use - Worth taking a look - Includes Windows 11 PC 64-bit (including monitor, keyboard, and mouse) - Fully installed and adjusted - Engraving software in German - Very easy to operate - Simply turn on and start - Fiber laser source with 30 watts for high-contrast and fast markings with very high resolution (see images) - Wobble function, e.g., for cleaning metal components - Deep engraving up to 3 mm possible - For engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - Heavy-duty industrial quality Csdjd Ha I Sepfx Aqvori - Complete system / ready for immediate use - Work area approximately 390 x 270 x 350 mm (L x W x H) - Clamping surface with fastening threads in a 50 mm grid - LED work area lighting - 50 mm pipe connection for smoke extraction - Engraving area up to 170 x 170 mm - Motorized adjustment of the focus position - Includes foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approximately: Width: 450 mm Height: 800 mm Depth: 750 mm Weight: approximately 80 kg

Condition: used, This listing is for a Aurora scentific water bath Credpfx Ajxzh Hxsqvsi

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Type: GV 60 20 Table dimensions: 6000 x 2000 mm Codpfx Aezd Ur Teqvjri Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Modesta extraction system Includes spare parts Year of manufacture: 2008 CNC control renewed in: 2018

Condition: new, Year of construction: 2026, functionality: fully functional, sheet thickness (max.): 350 mm, sheet thickness steel (max.): 20 mm, total width: 2,450 mm, total height: 2,350 mm, total length: 4,800 mm, cutting height (max.): 350 mm, workpiece weight (max.): 6,500 kg, warranty duration: 36 months, space requirement length: 3,150 mm, space requirement height: 5,000 mm, space requirement width: 2,450 mm, Equipment: documentation/manual, The Bluemotion HCP Series CNC Plasma is engineered for fabricators who demand precision, reliability, and ease of use. Designed and manufactured in Ireland, every HCP Series machine is built using premium industrial components and supplied with industry-leading Hypertherm technology as standard, delivering exceptional performance from the very first cut. Standard Features: - Hypertherm Edge® Connect CNC Control - Hypertherm ProNest® CAD/CAM Software Included - 350mm Gantry Clearance for processing sheet metal, 3D Profiles - Bosch Rexroth Linear Motion Components - Fully Servo Driven Axes with Servo Motors & Drives Csdpfszpzwmex Aqveri - Sealed Energy Chains for max. reliability in harsh workshop environments - Integrated Laser Pointer for fast and accurate plate alignment - Intelligent 3D Collision Detection to protect the torch and machine - Heavy-Duty Welded Steel Construction - Intuitive operation with a streamlined workflow from CAD to cut. - Comprehensive Commissioning & Operator Training From importing a DXF into Hypertherm ProNest to producing finished components, the HCP Series has been designed to maximise productivity while remaining straightforward to operate. Whether you're producing one-off prototypes or high-volume production work, the HCP Series delivers the accuracy, speed and reliability modern fabrication businesses expect. Every Bluemotion machine is backed by expert technical support, professional installation, and ongoing after-sales service to ensure you get the maximum return on your investment. This price includes: - Hypertherm 85A SYNC Plasma Source (20mm Pierce Capacity) - 3-Year Full Machine Warranty Built in Ireland. Trusted by fabricators. Designed to perform.

Condition: good (used), axle configuration: 3 axles, first registration: 02/2006, tire size: 385/55R22.5, = Additional options and accessories = - Air suspension = Notes = Cjdpezn Uzpefx Aqveri W09SAV3355BF21345 Finkl 3 as 2006 Steering axle Lift Vans water lift = Further information = Year of manufacture: 2006 Tire size: 385/55R22.5 Rear axle 1: Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Tire tread depth left: 30%; Tire tread depth right: 30% Unladen weight: 13,000 kg Technical condition: good Optical condition: good Please contact VAEX The Truck Traders for further information.

Condition: new, Year of construction: 2025, Plasma cutting machine Suitable for steel up to 40 mm. Csdszpbmujpfx Aqveri