Used Wash Out for sale (6,234)

Year of construction: 2014, condition: used, JetPetroClean container washing station Producer: OU Dontal, Estonia The installation is used to clean the inside of petroleum products tanks, especially railway cisterns. The cleaning process takes place in a closed system using hot water or hot water with detergents. Washing consisted in introducing a washing head through the upper hatch of the tank, and then washing the inside of the tank under a specified pressure. Dirty water was drained to the container tank by means of the lower inlets of the cistern, by means of diaphragm pumps. There, after the separation of impurities, the water returned to the circulation and was reused for further washing. It took about 1 hour to wash one tanker. The next step was to dry the inside of the tank and remove solid waste from the inside of the tank using exhaust fans. After the washing process was completed, the installation was blown through and dried using compressors. 1. Main container unit: Bodpfx Ashgimdjkaodb 20-feet container - year of production 2014 two main Lowara pumps - year 2014 hydraulic system with pressure gauges washing water tank (water tank 5770 L, waste tank 2540 L) Control cabinet compressed air tank 2. Auxiliary unit: 20-feet container - year of production 2012 two compressors GD ESM 11-7.5A - year of production 2013 gas generator - year of production 2015 control cabinet Meganex 15 kW electric heaters - year of production 2014 four Soler & Palau CBRT / 2-502 5.5 kW fans - year 2014 two diaphragm pumps compressed air tank 3. Waste container in a container construction 4. Rigid steel pipes and plastic hoses 5. Structures, platforms, stairs and railings for handling tanks 6. Washing heads, knees, valves and other elements of the hydraulic system. . Technical condition: used installation, for technical inspection before restarting.

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t Bsdpfx Aevut D Tekasdb die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: good (used), functionality: fully functional, Washing drum used for potatoes with steel platform Brand Zacmi Drum diameter 1180 mm Bodjwatdijpfx Akasdb Platform height: 2100 mm Overall dimensions: 5500 mm x 2400 mm x 4250 mm.

Condition: used, Year of construction: 1999, Technical details: pass through height: 2000 mm Bdjdpsymc Txefx Akaeb tank capacity: 800 l cycle time: - sec Heating capacity: 45 kW electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 63 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.800 m *

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, workpiece height (max.): 10 mm, operating speed: 50 mm/s, TECHNICAL DETAILS Minimum processing size: 100 mm x 400 mm Bjdpfeyk Sgiox Akaedb Processing thickness: 2 - 10 mm Maximum speed: 3 m/min MACHINE DETAILS Power: 45 kW DIMENSIONS Dimensions of the enclosure (L x W x H): 6,260 x 1,280 x 1,750 mm Dimensions of the control cabinet: 1,000 x 480 mm

Condition: excellent (used), Raw material water receiving tank Destoner Bin tipper with conveyor Bin washing system Safety railings Belt conveyor with carriers, 27 units Flat conveyor, 38 units Drum washer Bdedpfex Uqq Asx Akaob Platform Inspection table Vibrating sorter, 2 units Roller inspection table Hydrocooler Control panel Roller size grader Buffer tanks, 9 units Sormac carrot cutter, 3 units Bin stacker Screw conveyor Platform with stairs Option to sell selected machines. Machines are made of acid-resistant stainless steel. Prices are set per individual machine. Please check my other listings.

Year of construction: 2021, condition: used, functionality: fully functional, complete 3-stage washing system, entirely made of stainless steel 1st stage: washing with hot water 2nd and 3rd stage: rinsing with cold water Bjdpfxjyxgpps Akaedb workpiece passage height 2100 mm, depth 800 mm

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Wash Solution Temperature Control Unit Serial Number 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Year of Manufacture 2020 Technical Data System Type Pharma temperature control skid for precise temperature regulation of wash and elution solutions. Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology. Dimensions Length 1920 mm Width 1365 mm Height 1840 mm Design Fully pre-assembled, insulated temperature control skid Pharmaceutical design according to GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welds as per EN ISO 13920 D Insulation Completely insulated piping and equipment Closed-cell high-performance insulation with black protective sheathing Main Components PU1021 Process Pump PU9203 Chilled Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Tank Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitters Temperature Measurement Points Pressure Gauges Electrical Junction Box with Warning Labels Stainless Steel Cable Trays Media Chilled Brine Supply / Return Wash Solution Process Medium Control Air 6 bar All media connections sealed at factory and packaged securely for transport. Leak Testing Performed as pressure test with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Bdsdpfeyl Iwtex Akajb Pressure holding time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates according to EN ISO/IEC 17025 Measurement Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Documentation Scope FAT Plan and Report Deviation Report Layout Drawing Check Maintenance Inspection P&ID Leak Test Report Calibration Certificates Works Certificate 2.1 EN10204 Material List As-Built Isometrics Complete Turn-Over Package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Pharma documentation complete Application Temperature control of wash and elution solutions in biopharmaceutical production facilities Suitable for GMP environments Condition New system Original packaging Unused Year of manufacture: 2020 Factory condition Fully documented Immediately available

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System Type: Temperature control unit / heating and cooling module for wash solution (CIP or process washing system) Design: Bsdpfxsyl It Is Akaedb Compact, fully pre-assembled skid unit in robust stainless steel frame construction, crane-liftable via integrated lifting points. Frame and Construction: Welded stainless steel construction in industrial design, free-standing, multi-level piping configuration for optimal space utilization. Maintenance-friendly access from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation of main lines and apparatus. Integrated drain and vent fittings. Valve Technology: Multiple manual ball valves (GEMÜ) in main and bypass circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in the heating and cooling circuit. Instrumentation and Control: Temperature measurement points in both supply and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical junction box with protective labeling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop. Pump Technology: Two electrically driven centrifugal pumps with red-painted motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning markings. Wired sensors and actuators. Prepared for integration into a central PLC or process control system. Application This system is used for precise temperature regulation of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, production plant washing stations, and temperature-controlled cleaning processes in the pharmaceutical and biotechnology sectors. The wash solution circulates in a closed loop via pumps, is temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature is regulated automatically via pneumatic control valves to maintain defined setpoints accurately. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clearly organized media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of manufacture 2020. Very good visual and technical condition. Professional execution in pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, Factory Acceptance Test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contacting components. Special Features Fully insulated temperature control module in a compact, high power density design. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag No.: MR-INH-VPR61-KK6751 Equipment No.: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motors Stainless steel pump housing Inline design Heat Exchanger: Integrated stainless steel heat exchanger Shell and tube or jacketed tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Instrumentation: Pressure transmitter Pressure gauges Temperature measuring points Integrated flow measurement Electrical: Integrated control cabinet or terminal box Bjdpoyl Ib Ejfx Akasdb Ready-wired for connection Industrial standard components Piping: Stainless steel process pipelines Fully insulated Flange and clamp connections Transport: Forklift- and crane-compatible Heavy-duty stainless steel base frame Application The temperature control unit is designed for controlled temperature regulation of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical processing plants, as well as temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready to connect High-quality stainless steel construction Industrial-grade quality components, including GEMÜ valves Service-friendly design Condition New system Never used Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Premium industrial components Ideal for new projects or as a replacement/redundant unit Immediate integration possible

Year of construction: 2010, condition: excellent (used), Spindle tool in wooden case Make IGP Spindle mount Mk 4 maximum spindle range 200 mm Bdjdpfx Asf Dx Srskasb Weight 6,8 kg

Year of construction: 2003, condition: used, 1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements Bdjdoyfumnjpfx Akajb with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932 *

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. Bedpfx Aein Edwokajdb - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 volts Current: 90 A Connected load: 62 kW Bjdpfox Ex Nzex Akaodb Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Leutenegger (Starrag) wash box Technical specifications Bath contents: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V / 230V 50 Hz Supply line: 40A Control voltage: 24 V DC Temperature max: 50 ° C Bjdpfjd Nlybex Akaedb Heating electric Heating power: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3 / h Shipping costs on request Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request

Condition: used, Filter cloth washing plant Bdsdebpg Sxjpfx Akaob Size: for chamber filter press size of 1000 to 2000 Many of these machines in stock.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demo unit. Can be viewed and tested in our showroom. Self-collection or delivery available (plus transport costs). Equipped with integrated heating. Key Features: - Professional cleaning in a closed cycle using water, blasting media, and cleaning agent - Suitable for very wide wheels (up to 360 mm width) - Narrow wheels are stabilized by a pneumatic wheel support to prevent tipping - 50°C water temperature thanks to built-in heater for improved cleaning performance - After the wash cycle, wheels are blown off with compressed air - Automatic, environmentally friendly wheel washing machine - Minimal water consumption - Time savings due to automatic washing process - Robust stainless steel casing - Programmable water heating - Double noise insulation - Washing chamber and pump sump - Compartment for drive and controls Bdjdpfx Akox Hgb Ueasb Technical Specifications: Dimensions (W x D x H): 960 x 1,220 x 1,450 mm Weight (empty): 290 kg Water volume: 300 l Blasting media capacity: 25 kg Rated output (motor and drive): 6 kW Heating capacity: up to 50°C with 4 kW Wheel diameter: 560 – 800 mm Wheel width: 135 – 360 mm Max. wheel weight: 60 kg Washing program durations: 40 / 60 / 120 seconds Heating time: 60 – 120 min Water temperature: 50°C Working media quantity: 20 kg Pump capacity: 600 L / min Electrical connection: 230/400 V, 50 Hz, 6 kW Recommended fuse: 25 A (32 A CEE plug) Min. operating pressure: 4 bar Max. operating pressure: 10 bar Noise level: 89.5 dB (A) Scope of delivery: 1x 360 HP wheel washing machine 1x Blasting media 25 kg 1x Blasting media basket 1x Rubber mat 1x Sound insulation foam 1x 30 liters washing fluid 1x Perforated PVD noise reduction filter

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, total length: 3,500 mm, total width: 2,000 mm, total height: 3,300 mm, working height: 520 mm, input voltage: 400 V, overall weight: 4,300 kg, type of input current: three-phase, Lisec glass washing machine VHW-25V8, year 1990, working direction left to right, consisting of following: - RTV-27/25, extension inlet conveyor washing machine, year 1990 Bodpfx Akjyxw D Rjaodb - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 All machines are in good working order and can be seen in our warehouse in Austria on appointment.

Year of construction: 2000, condition: ready for operation (used), A Hobart pass-through crate washing machine is available. Heating type: steam, steam pressure: 8.5bar, pass-through width: 612mm, pass-through height: 440mm, washing goods: sheets, sheet dimensions X/Y: 650mm/600mm, throughput capacity: approx. 75sheets/h, infeed length: 350mm, outfeed length: 1100mm. Documentation available. An on-site inspection is possible. Bdsdpfeyq R E Djx Akasb

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock Bdedjykkk Hopfx Akaob - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9,000 L Wash Solution Tank – 316L – Jacketed – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year: 2020 Condition: As new / unused Technical Data Product type: Wash solution tank Nominal volume: approx. 9,000 litres Wetted material: 1.4404 (AISI 316L) Design: Horizontal layout CE marking: available Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: Bodpeykkivjfx Akaedb • High-gloss polish • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Custom-built in 316L stainless steel • Large manway with pressure closure • Integrated CIP spray nozzles / cleaning pipes • Multiple clamp and flange connections • Instrument ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy-duty industrial design • Pre-installed external piping and process connections • Excellent accessibility for maintenance and inspection The images clearly show the high-quality workmanship, the clean welding, and the mirror-polished product-contact internal surface. Condition • Never used in production • Inventory stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Wash solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production systems • Sterile liquid processes Documentation – fully available and structured Comprehensive, project-specific quality and manufacturing documentation included, such as: • EU declaration of conformity and warranties • Reports and EU component verifications • Assembly documents • Component drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welder lists, welding procedure qualifications, samples • Analysis certificates for welding filler material • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Surface roughness report • Surface treatment report • Operating and maintenance manuals (unit) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation package available digitally. Special Feature This is not a standard tank, but a premium, custom-built unit in genuine pharmaceutical quality with certified pressure design, documented manufacture, and full PED compliance including TÜV acceptance. The heavy-duty construction, large connections, and CIP integration make this vessel ideal for demanding GMP applications.

Year of construction: 2026, condition: as good as new (ex-display), HD washbasin - HD brush washbasin Washstand has an adjustable 60 bar HD pump with which the cleaning takes place in a closed working chamber. The cleaning is done by means of aqueous degreaser (10kg included in delivery) and at approx. 45°C. Viewing window incl. lighting Medium filtration via candle filter Comfort operation by means of foot switch inclusive turntable technical data: Working surface: 800 x 600 mm useful height: 400 mm load capacity: 50 kg Bjdpfx Akod H Umrsasdb Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 lt/min Washing temperature: adjustable up to max. 45°C Tank capacity: 100 lt Heating capacity: 3.000 W Power, total: 7,0 kW Voltage: 400 V ac 1 P+N+PE; Frequency: 50 Hz Machine weight: approx. 140 kg Overall dimensions with open lid: 1,100 x 910 x 2,020 mm

Year of construction: 2026, condition: as good as new (ex-display), Spray cleaning system - Parts washing system with hinged door 1-tank version (washing), tank vol. 320 litres basket: LxW 1.100 x 1.100 mm useful height: 800 mm max. loading weight: 700 kg pump pressure of washing pump: 4,3 bar, pump power: 5,5 kW heating (electric) 20 kW; heatable up to 80°C control: Siemens Logo Bsdod Rkmxjpfx Akaodb inclusive - steam vapour extraction and condensation water return - automatic water refill - autom. chemical dosing (0,8 - 5,5%, adjustable) - insulation of the complete plant - plant completely made of stainless steel 1.4301 - basket rim (removable on one side) - 7-day timer for the electr. heater - E-spray pipe h= 450 mm - Preparation for oil separator (electrical and mechanical) available New unit; currently used in our technology centre for washing tests

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic cleaner with pneumatic fabric lift and oscillation during the cleaning process. including surface wash-off/ oil separator basket useful dimensions: approx. 500x300x250 (h) mm 1 stainless steel basket included max. loading weight goods lift: 50 kg volume: 150 liters (incl. oil separator) material of the tray and outer cladding: stainless steel 1.4301 ultrasound as floor sound: 1.500 Watt (eff.) / 3.000 Watt (peak) Multifrequency: 25/50 kHz (switchable), therefore optimal for all kinds of metals (also aluminum and non-ferrous metals) including level control and dry run protection unit is equipped with rollers (mobile) Bodpsh Rmpdefx Akajdb Connected load electrical (total): 7 kW Year of manufacture: June 2022 outside dimensions: 1.150x800x900(h) mm total height incl. goods lift and opened lid: 1.450 mm

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Weight: 20 kg Ultrasonic frequency: 38 kHz Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Total power consumption: 1,600 watts Sweep: yes Bsdohma S Ropfx Akasdb