Used Wagner Cobra 40 10 for sale (88)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1966, Wagner metal band saw - Control unit with analog counter - Band length 5,000 mm - Front-mounted guide rollers - Semi-automatic tensioning device Fjdpfxe Adz E Ro Ag Togi - Chip conveyor

Condition: repair required (used), functionality: limited functionality, Manufacturer: Maschinen Wagner Model: DCE 230 × 1500 Machine type: Lead and feed spindle lathe Machine no.: 2JG0160 Year of manufacture: 1990 Power connection: 380 V / 50 Hz Distance between centers: approx. 1,500 mm Swing over bed: approx. 230 mm* Swing over cross slide: approx. 460 mm* Turning diameter over cross slide: approx. 290 mm* Spindle bore: approx. 60 mm* Max. spindle speed: approx. 1,800 rpm* Main motor: approx. 5.5 kW* Machine weight: approx. 1,800–2,200 kg* Feed: mechanical longitudinal and transverse feed (feed shaft does not rotate, presumably a shear pin has sheared) Thread cutting: functions via lead screw and feed gear Guideways in very good condition. Accessories: Tool holder, tailstock center The machine can be inspected on site. Fodpez Hpahefx Ag Tjgi

Condition: used, machine/vehicle number: 9125044, with clamping cube, size: approx. 650 x 500 x 500 mm, overhang: approx. 1000 mm. Fgedpfx Ao Af Nkdsg Tsi

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 43153, heavy duty circular saw Fgodpfod N Uw Rjx Ag Tei ..more information following soon..

Condition: reconditioned (used), - Non ferrous eddy current separator type Wagner - with vibration feeder - Conveyor width 1200 mm - overhauled condition - ready to work Fgsdps Ahg Rgsfx Ag Tji

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,435 mm, spindle motor power: 15,000 W, total height: 2,100 mm, overall weight: 5,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 8287D, number of axes: 2, This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Machine Benefits Qualitative Machine Benefits • Machine in very good condition, with very low working hours Technical Machine Benefits • Right and left spindle rotation • Rapid feed (z, x axes): 15000 mm/min • Repeatability accuracy: ±0. 005 mm Fgodpjzbcmnofx Ag Toi • Positioning accuracy: ±0. 01 mm • Max. Distance between centers: 1500 mm • Bed width: 500 mm • Spindle nose camlock: din 55029 kk8 • Linear guides on x and z axes • Precision ball screws, hardened and ground • Telescopic cover on z-axis Extra Information Tail Stock Tailstock adjustment: manual Tailstock quill travel: 100 mm Mount Position (Assembly) Electronic handwheels with incremental preselection Feed lever with latch function Rapid feed override with selector switch Movable operator panel Constant cutting speed Media Automatic central lubrication Work lamp Complete coolant system Enclosure with 2 sliding doors and safety glass windows 1 set of foundation bolts CE compliance Control Unit Siemens 828 B-T control ShopTurn operation with Manual Machine mode Dimensions Machine Depth 3400 mm

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Fsdpfx Aoyw N Acog Tegi Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Fodpfsy Eqtiox Ag Togi

Condition: good (used), Year of construction: 1992, machine/vehicle number: 43817, Offer 26319 Technical data: - Cutting range at 90° (round): 50 to 420 mm - Cutting range (square): 420 x 420 mm - Saw band dimensions (approx.): 6280 x 38 x 1.3 mm - 6 cutting speeds: 16 x 105 m/min - Cutting pressure, continuously adjustable: 0 - 400 mm/min - Hydraulic material clamping - Material feed automation: 8 - 520 mm - Multi-stroke up to: 2080 mm - Minimum remaining piece length: 70 mm - Pre-selection of the saw band stroke height - Chip conveyor - Coolant system - Total drive power: 400 V / 7.5 kW - Space requirement (approx.): W 2900 x H 2700 x D 2400 mm - Weight (approx.): 2900 kg - Motorized feed roller runs: 3 x 2000 mm Fgsdps Agvk Sefx Ag Tji - Total weight of roller runs (approx.): 1200 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 90,000 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table length: 4,000 mm, table width: 2,600 mm, TECHNICAL DETAILS Travel distance X-axis: 2,600 mm Travel distance Y-axis: 4,000 mm Table length: 4,000 mm Table width: 2,600 mm Maximum glass weight: 260 kg Glass thickness: 4 - 10 mm MACHINE DETAILS Cycle time: 10 pieces/hour Cabin type: SUP-E2-D107/20000 + "D" Total production line length: 90 m Installed power: 1,100 kW EQUIPMENT Loading station with lifter Vertical inlet conveyor WM Vertical washing machine with dryer Vertical inspection conveyor with activation section Tilting table with horizontal transport and vertical inspection Pre-heating section Powder section with belt cleaning Cleaning conveyor Cooling section Fgsdpfx Agsyk S Uye Toi Tilting table with vertical and horizontal transport Vertical inspection station Unloading station Electrical distribution Deionized water system for the washing machine supply The ovens that may be visible in the pictures are not included in the scope of sale and delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, operating hours: 1,571 h, load capacity: 3,000 kg, fuel type: electric, battery capacity: 240 Ah, battery voltage: 24 V, fork length: 970 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 664 kg, total length: 1,650 mm, total width: 1,150 mm, fuel: electricity, STILL WAGNER EGU 3000 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 3.000 kg Fork length: 970 mm Drive: Elektro 24V Battery: 24 V 240 Ah v. 1998 Charger: ohne/without Tyres: Bandagen Service weight: 664 kg Length: 1.650 mm Width: 1.150 mm Fsdsz Apvdepfx Ag Tegi Year of manufacture: 1998 Operating hours: 1.571 h Condition: working condition Internal no.: 1308670 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 1980, type of input current: three-phase, pressing force: 500 t, stroke length: 300 mm, table width: 1,800 mm, table length: 1,000 mm, ram plate width: 160 mm, clearance between the columns: 1,850 mm, total length: 2,000 mm, total width: 3,000 mm, total height: 6,000 mm, overall weight: 50,000 kg, year of last overhaul: 2010, distance between side stands: 800 mm, distance between stands: 1,850 mm, stroke rate (max.): 24 1/min, WAGNER PDE 500/1.8 mechanical press, 500 tons, year 1980, overhauled in 2010. Double-column/4-column machine with a slide stroke of 300 mm, table size 1800 x 1000 mm, front opening between columns of 1850 mm, and top dead center clearance of 1100 mm. The press is equipped with a die cushion. Fodpfx Ags Agb Iao Tjgi External dimensions: approximately 3000 x 2000 x 6000 mm. Coil unwinder included.

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: Fgedpfoz Slpxjx Ag Tji • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Year of construction: 2008, condition: ready for operation (used), A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible. Fjdpfsyit Ifjx Ag Tjgi

Condition: used, Year of construction: 2008, Wagner WDE500 Lathe, Year 2008 Used lathe from Wagner Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing diameter over cross slide: 280 mm Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of tool stations in turret: 1 Multifix "C" Tailstock: Yes, MT 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system - Base holder - 3-jaw chuck - Various PARAT tool holders Fedpfx Agsxlz Rxe Tegi With original operating manual Fully functional, good condition as shown in the photos Viewing, collection and delivery available for a fee

Condition: used, Year of construction: 2009, CNC Machining Center Wagner-Eumach, Model EBM 3200, year of manufacture 2009 for sale. Condition: Fully operational Travel X-axis: 3,200 mm Travel Y-axis: 1,100 mm Travel Z-axis: 900 mm CNC control manufacturer: Sinumerik CNC control model: Sinumerik 810D Shopmill Total weight: 25,000 kg Overall length: 7,800 mm Overall width: 4,700 mm Maximum workpiece weight: 5,000 kg Feed travel X-axis: 3,200 mm Feed travel Y-axis: 1,100 mm Feed travel Z-axis: 900 mm Spindle motor power: 45,000 W Rated apparent power: 45 kVA Max. spindle speed: 6,000 rpm Min. spindle speed: 6,000 rpm Table length: 3,250 mm Table height: 1,030 mm Table load: 5,000 kg Table width: 1,220 mm Maximum tool diameter: 125 mm Maximum tool length: 300 mm Maximum tool weight: 15,000 g Spindle operating hours: 18,000 h Equipment: Fgedpfxjw D Sltj Ag Tsi Chip conveyor, NC rotary table (table size 800 x 800 mm), tool holder SK 50, through-spindle coolant (IKZ) Inspection possible by appointment.

Condition: used, BAG PACKING MACHINE Consists of: Weighing machine: make Wagner type WAMA-SP Compact, year 1995 Conveyor belt Bag emptying machine: DCE Sintamatic Bag sealing machine: Toss type 780 year 2002 Fsdpfx Agou Nu Hvs Tegi *

Condition: used, Storage location: Nattheim Fodo Adritopfx Ag Tsgi

Condition: good (used), Year of construction: 1989, functionality: fully functional, Wagner DCG 160 precision guide and lead screw lathe – year of manufacture 1989 Technical data Manufacturer: Wagner Maschinen Model: DCG 160 Year of manufacture: 1989 Swing over bed: 160 mm Maximum turning diameter over bed: approx. 320 mm Distance between centers: approx. 750–1,000 mm Speed range up to approx. 2,000 rpm Guide and lead screw Longitudinal and cross feed Threading unit 380 V Equipment Fedpfx Aszhitysg Tjgi 3-jaw chuck Quick-change tool holder Tailstock Work light Coolant system Description Robust German precision lathe for toolmaking, maintenance, training, and the production of individual parts. The machine is in good used condition and is fully equipped. Ideal for workshops, training centers, or general mechanical engineering.

Year of construction: 2009, condition: ready for operation (used), Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Fgedpfx Agev Hrg Do Tji

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Fgodpfx Aez Sm Ucog Tei

Condition: ready for operation (used), Wagner Electromagnetic Magnetic Chuck / Magnetic -Type: 115-30/60 -Rated voltage: 110 V -Rated current: 1.05 A -Apparent power: 105 VA Fedpfxeztcu Ie Ag Togi Dimensions: L x W x H 0.6 x 0.3 x 0.075 meters / Weight 90 kg Errors and omissions excepted.

Condition: ready for operation (used), * Brand: Wagner Fgsdpfx Agsy D Sx Te Tsi * Type: electro magnetic conveyor belt * On stock: 1 piece * 1x : length frame A-A = 1900 mm * Beltwidth: 800 mm * Driving: 1,5 kW gearbox * Dim. block: 1000 x 750 x 400 mm * Incl.: rectifier.

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 80 mm, turning length: 2,000 mm, turning diameter: 610 mm, spindle speed (max.): 1,800 rpm, Swing diameter over bed 610 mm, over cross slide 370 mm. Distance between centers 2000 mm. Spindle bore 80 mm. Speed range 40 - 1800 rpm. Tailstock: quill travel 150 mm, Morse taper 5. Includes Siemens 810D manual turn control, steady rest, Parat toolpost, coolant system. Three-jaw chuck D 315 with various jaws, chuck mounted on spindle rear side. Manual, CE declaration. Fgjdpfxjyzmk Es Ag Tsi

Condition: ready for operation (used), * Brand: Wagner Fodpfeywndljx Ag Tsgi * Model: electro magnetic conveyor belt * On stock: 1 piece * 1x Length frame: A-A = 2600 mm, Beltwidth: 1200 mm * Driving: 7 kW gearbox * Dim. Block : 1700 x 1150 x 600mm * Incl.: rectifier.