Used Vogel Schemmann for sale (202)

Condition: new, Year of construction: 2025, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Cycle control Todpfxjrcivgj Ahujf OTHER: Geometrical-acceptance according DIN8609

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication Tjdpfxst Hw Uve Ahujf * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, maximum load weight: 30,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,770 mm, Year of construction: 2025, Equipment: ABS, Equipment: * Tank volume 30m3, Ø2200mm, wall thickness 3mm, temperature 0-60°C * Extended swivel pipe * 4" flushing line with 2 free falls of 2.5", 1x at the front and 1x in the middle of the tank. * Flushing line on the left side ü Tension cables over the hose trays * Automatic pump shutdown. ü Axle also equipped with anti-spray mat * Bracket with 2 wheel chocks * Left and right (narrow and high) hose racks, each 5m, made of galvanized steel (250mm wide, 190mm high). Pump * Vogelsang pump, 6,000L / min. Axles * 9 ton axles Valx Ø430 disc brake, ET120 Brake * EBS braking system Wabco * TPMS ü Wabco Tire Pressure Monitoring System in accordance with R141 * No electronic air suspension Extra options * Third axle as a trailing axle. Lift axle * Automatic lift axle on the first axle automatically switched depending on the load, or by applying the brake 3 times. * With traction aid, load on the 2nd and 3rd axle up to 130% under 30 km/h. Todpfx Aewwn Abehujf Tire size * Tire size 385/65 R22.5 Tires * Apollo Lighting * 24 volt lighting device Lighting options * Flashing side marker lights * Work lights left and right, on the first axle. * 2x LED work lights at the rear. 1x left, 1x right mounted on the hose racks Painting Painting of the tank in RAL 7030 STONE GRAY * Painting of the chassis in RAL7016 ANTHRACITE GRAY Other * Free fall connection at the rear of the pump. Connection with manual fitting 6? ball valve for emptying the tank, venting container made of V2A * Docking funnel 8? at the top of the rear. Pipe down to the bottom of the tank with a manual slide.

Condition: used, mileage: 103,500 km, power: 121 kW (164.51 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 11/2020, emission class: euro6, color: white, number of seats: 3, Year of construction: 2020, total length: 5,998 mm, total width: 2,050 mm, total height: 2,522 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Citroen Jumper Panel Van L3 H2 with 3 seats – original 103,500 km – immediately available – * Diesel – Displacement: 2,179 cc – 121 kW / 165 hp – Euro 6 – Green emissions sticker * 6-speed manual transmission – Wheelbase: XXXX mm – with built-in shelving – * German vehicle – German registration documents – one previous owner – * Vehicle is immediately available and ready for collection – * Please schedule an appointment for viewing – * Contact person: Mr. Andreas Vogel * The information provided online constitutes non-binding descriptions. * These do not represent guaranteed characteristics. * The seller is not liable for typographical or data transmission errors. * Subject to alterations, errors, and prior sale. Special Equipment: Tedpfow A Ekajx Ahusf Passenger side airbag, audio system: digital audio system (DAB) with CD player, MP3-capable and touchscreen, driver assistance system: emergency brake assist, rear door (opening angle 270 degrees), navigation system with color display, USB port, reversing camera system. Additional Equipment: Driver’s airbag, electric and heated exterior mirrors, wide-angle exterior mirror, integrated turn signals in exterior mirrors, color-coordinated, brake assist, short digital roof antenna, body type: large-volume panel van, padded headrests, 90 L fuel tank, cargo partition, height-adjustable steering column (steering wheel), engine 2.2L - 121 kW Blue-HDI FAP CAT, wheelbase 4035 mm, full-size spare wheel, low-emission per Euro 6d-TEMP standard, sliding door on right side (cargo/passenger compartment), SCR system (AdBlue technology), side protection mouldings, seat upholstery: fabric, cab seats: front passenger double bench, cab seats: driver’s seat with lumbar support, start/stop system, permitted gross weight 3.5 t.

Year of construction: 2018, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet Tedjflpmdjpfx Ahusf • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Brushless digital A/C servo drives and motors on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis (anchored at both ends) • Low-backlash planetary gear boxes • Fully closed cable carriers prevent the cables from damage by chips and fine dust • High quality, shielded cables for energy chains are a guarantee of reliability • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 200 mm • Z-axis travel 280 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Dimensions approx. 3,460 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Weight approx. 3,500 Kg CNC Control System • Siemens Sinumerik 808D Advanced • Color LCD display • IP65 protection for CNC front panel and machine control panel • Preassigned keys for common functions, such as handwheel selection, tool change, coolant control or program testing • 7-segment display for tool number • Spindle control with spindle override (rotary switch with 15 positions) and feedrate / rapid traverse Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface Servo Motors and Drives • Siemens Sinumerik Digital Field Bus • Siemens SINAMICS V70 servo drives • Siemens SIMOTICS S-1FL6 servo motors • Siemens pre-assembled MOTION-CONNECT cables Automatic Tool Change Spindle • Spindle power 8 KW (S1) / 10 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder ISO-30 • Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders ISO30 / ER32 are included 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually valved High pressure vacuum pump according to customer requirements Precision Tool Length Sensor CE Package Delivery, commissioning & training as per requirements

Condition: excellent (used), Control : Heidenhain TNC 426 Dimensions Space requirement (WxDxH) 1.92x1.85x2.4 m Weight Weight approx. 2'400 kg Working range travel lengthwise X-axis 500 mm Transverse travel Y-axis 255 mm Quill stroke (controlled) Z-axis 147 mm Quill stroke (manual) Z-axis 160 mm Machine head travel W-axis 500 mm Feed rates Speeds: Todstp S R Hspfx Ahujf Rapid traverse - X- and Y-axis 1-11,000 mm/min - Z-axis 1-6,000 mm/min - W-axis 1-3,600 mm/min Feed forces - X- and Y-axis 6'500 N - Z-axis 8'000 N Rapid traverse - X- and Y-axis 11 mm/min - Z-axis 6 mm/min Displacement measuring system Direct measuring system via linear scale X / Y / Z axis Resolution Indirect measuring system via rotary encoder Z axis Resolution in X-, Y-, Z- and W-axis 0.001 mm Accuracy of position tolerance P axis(es) X / Y 0.005 mm Position spread Ps axis(es) X / Y 0.003 mm Z / W 0.005 mm Table clamping surface (lxw) 885 x 320 mm Working area T-slots: - Number 5 - - Width 12-H8 mm - Spacing 50 mm Permissible table load 250 kg Table height from floor 1040 mm Distance table-spindle nose (min-max) 0-120-620 mm Horizontal projection 300 mm Work spindle Quick-change tool system SF 32 - Hydraulic tool change via push buttons - - Repeat accuracy 0.002 mm - Changing time (manual) approx. 5 sec Speed range (infinitely variable) 50-9,000 rpm Drive power 7.6 kW Max. Torque 65 Nm Cutting capacity Drilling capacity ø 25 mm Thread cutting M 20 - Shuttering Semi-shuttering with sliding doors - - Coolant Coolant: Lubrication - External tank, capacity 100 l - Pump flow rate 75 l/min Central lubrication system Vogel

Condition: new, Year of construction: 2025, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... Todpfx Asd Iz D Aohusf CONTROL: Cycle control Fagor8037TC or Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: used, maximum load weight: 31,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 06/2026, loading space volume: 30 m³, Year of construction: 2024, Equipment: ABS, 3-axle LoF slurry tanker SANH SCHWARTE-JANSKY "GÜLLE-TAXI" Stainless steel V2A slurry tank trailer, 30,000 liters, pneumatic sliding cover First registration VOGELSANG rotary lobe pump type VA 186-260Q, output max. 6,000 liters/min, replaceable housing shells Automatic pump shut-off, tank fill level easily adjustable by the driver Flushing pipe DN150, with 3 outlets (in front of each baffle and in front of the front wall) 2x baffle floors 3 manhole covers, DN500 8" suction funnel at the rear top Stainless steel hose trays left and right, approx. 6,000 mm long Tedpfx Ahjwu Hfcjusf Rear swivel outlet in 6" with Perrot coupling Drain device for the product hose All slides pneumatically operated including monitoring function Control of the slides via RADIO REMOTE CONTROL Complete piping made from V2A stainless steel SAF off-road axles with drum brakes 1st axle LIFT AXLE 3rd axle trailing steering WABCO trailer EBS with RSS stability program 6 tires 560/60 R 22.5 Unladen ready-to-drive weight approx. 7,700 kg Fifth wheel height approx. 1,350 mm JOST crank landing gear Stainless steel storage box left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING, with us available immediately also as a full-service rental-----

Condition: used, maximum load weight: 23,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 09/2025, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, Kotte combination trailer for slurry and bulk goods * Produced in 2015, new TÜV inspection and registration in 02/2019 * The slurry chamber at the bottom can be hydraulically raised to increase the tank volume. * Vogelsang slurry pump Tsdpswpyzgsfx Ahuof * Conveyor belt system at the top for unloading bulk materials * Hydraulic rear flap with slider * Grain-tight * The chassis and combination technology are fully functional * Air suspension * Self-steering axle For further information, we are happy to assist you.

Condition: used, mileage: 451,500 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 04/2008, loading space length: 5,500 mm, loading space width: 2,300 mm, loading space height: 2,050 mm, emission class: euro4, color: white, number of seats: 3, total length: 7,550 mm, total width: 2,450 mm, total height: 3,250 mm, Equipment: ABS, air conditioning, parking heater, tail-lift, * MAN 8.180 with box body for laundry service – air conditioning – 3 seats – from first owner – * Diesel – displacement: 4,530 cc – 132 kW / 180 HP – Euro 4 – green environmental badge – * Leaf spring suspension front & rear – body dimensions: length 5.50m x width 2.45m x height 2.10m – * 3 seats – 6-speed manual transmission – air conditioning – Zepro tail lift, 2 tons – * Permissible total weight: 7,490 kg – curb weight: 5,695 kg – payload: 1,795 kg – * Vehicle available immediately and ready for collection – vehicle is signwritten – Tsdpfxswx Ubme Ahuof * Please schedule an appointment for viewing – * Contact: Mr. Andreas Vogel * The details provided online are non-binding descriptions. * They do not constitute guaranteed features. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors and prior sale.

Year of construction: 2020, condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane Tedpjhwd Dnofx Ahujf - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: used, mileage: 696,000 km, first registration: 12/2009, Year of construction: 2009, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! ADR Hazard Classes: FL, EX II, EX II, OX, AT Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist Tjdpfx Aownz Dtehujf • Warning beacons • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: refurbished (used), Year of construction: 2005, NEW MACHINE TECHNICAL DATA: Working diameter 3200mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2800mm Face plate rotation speed 0-80U/min Max. torque on face plate 67000Nm Performance of main drive 75kW SETTINGS: -2 supports -3-fold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing inkl. -chip conveyor -cooling water preparation -Turret -driven tools -... CONTROL: FAGOR 8055TC OTHER: Tjdpfxolin Rco Ahusf Geometrie-Abnahme nach DIN8609 CE Deklaration

Condition: good (used), Year of construction: 1989, 1 x automatic lathe Traub TD 16 year of manufacture: 1989 with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Tedpfx Ahsvga A Tousf Year of construction: 1989 Equipment: 6-fold star turret Material quick clamping. Long turning device Central lubrication Vogel Accessories: see photos The machine can be inspected under power.

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: Tsdpotrhf Aofx Ahujf - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: used, mileage: 605,000 km, power: 330 kW (448.67 HP), first registration: 07/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 1845 LSnRL Actros BIG SPACE - air conditioning - retarder - good condition * Chassis number : WDB96340610079482 - from 1st hand - German vehicle - * Diesel - displacement : 12.809 ccm³ - 330 KW / 449 PS - Euro 6 - Green sticker - * Tire sizes : Front axle : 355 / 50 R 22,5 Rear axle : 295 / 60 R 22,5 * Electric air conditioning & stationary air conditioning - * PICK-UP PRICE - TAKE IT AS IT IS - WITHOUT TÜV - WITHOUT LICENSE PLATE - * Vehicle immediately available and ready for collection Tedpfxevul H He Ahujf * For viewing please make an appointment - * Contact person : Mr. Andreas Vogel * The information provided on the Internet is a non-binding description. * They do not represent guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to alterations, errors and prior sale. Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Ambient lighting LED, Work lights, Audio system: CD radio (Bluetooth), Bi-xenon headlights, CB radio, Air horn, Electrical pre-installation in cab 24V / 100 A, Driver assistance system: Attention-Assist (drowsiness detection sensor), Driver assistance system: Brake Assist (Active Brake Assist 3), Driving assistance system: Lane Keeping Assist, Driving assistance system: Roll Control Assist, Driver's cab: Style-Line interior, Suspension: Front springs 8.0 t, Air suspension, Holder for notebook, Info display 12.7 cm with video function, Automatic air conditioning, Comfort couch top, wide, Fuel tank: 630 ltr. aluminum, cool box / refrigerator, integrated air intake, roof air deflector (latching, without plinth panel), tire pressure monitoring system, spare wheel, side spare wheel lift, retarder, tail lift switch, automatic circuit breaker, seats in cab: SoloStar Concept, exterior sun visor, auxiliary air conditioning, additional 24 V socket in passenger footwell, preparation for Fleetboard, preparation for reversing camera, additional thermal insulation Further equipment: EURO 6 emissions standard, axle configuration: 4x2, Actros 4, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel air reservoir, medium air unit, cab: L BigSpace, cab: steel-sprung, comfort, suspension: air / air, electric windows, tinted windscreen, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Rear axle disk wheel 440, Body/bodywork: Chassis, comfort locking system, communication interface, radiator blind, power steering pump controlled, lift device trailing axle, 2-stage air compressor, engine 12.8 ltr. - 330 kW R6 diesel (OM 471), engine brake, engine compartment encapsulation, trailing axle with single tyres, ramp mirror, residual heat utilization, front and rear axle disc brakes, seats in cab: passenger function seat, seats in cab: Driver's seat backrest can be folded down, Voltage converter 24V / 12V 10 A, Front splash guard, Front axle stabilizer, Additional stabilizer, Rear axle / trailing axle, External left-hand storage flap, 24V cab socket, Tachograph / EC tachograph, Door extension for cab, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle, Regulated water pump, Perm. Gross vehicle weight 18.00 t, Auxiliary heating (water)

Year of construction: 2017, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis • Low-backlash planetary gear boxes • Fully closed cable carriers • High quality, shielded cables Tedsflprijpfx Ahuof • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 280 mm • Z-axis travel 480 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Weight approx. 4,000 Kg CNC Control System • FlexiCAM ACS Control System Pro • Powerful industrial CNC control system “Made in Germany” • DIN-ISO 66025 G-Code compatible • Graphical CNC simulation • Industrial PC with 17” Touchscreen display as HMI • User-friendly machine control panel with mode selectors and function keys • Spindle control with spindle override and feedrate / rapid traverse override (rotary switches) • Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Windows keyboard and mouse • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface • Remote Support via Internet • Touchscreen and machine control panel are integrated into enclosure Servo Motors and Drives • Digital servo drives with AC servo motors • High resolution absolute encoders (17 bit) • EtherCAT fieldbus Automatic Tool Change Spindle • Spindle power 10 KW (S1) / 12 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder HSK-63F • Max. 26 mm (1 1/4") tool diameter • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders HSK-63F / ER40 are included Precision Tool Length Sensor 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually controlled High pressure vacuum pump according to customer requirements 4x Popup Pins Automatic Central Lubrication (Grease) CE Package Delivery, commissioning & training as per requirements

Condition: used, Year of construction: 2017, Eidam slurry slitter with Vogelsang distributor 6.00 m working width 2 discs per share 32 outlets Vogelsang distributor 3-point attachment cat 2/3 Tedev Aqnfspfx Ahujf Lighting and warning signs | Internal number: 11223711

Condition: excellent (used), Year of construction: 1994, Hang Paper Drill 107-20 electronic Automatic multi-spindle paper drill with 4 drill heads - Various drill diameters - Depth and side stops - Automatic belt tensioning - Quick adjustment of drill heads EXTRAS: Continuously adjustable spindle drive 100-1600 rpm for processing mixed papers! Todet E S R Nopfx Ahujf Very good condition Price plus VAT EXW. All information is subject to change without notice. Subject to prior sale. Dealership. This sale is made without any warranty.

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm Todpfx Aed Nl E Uehuef hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Year of construction: 2020, condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is reviewed and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures Todpfx Aehwd Eashuof - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: excellent (used), Bohm & Co. spiral binding machine (similar to RENZ) For plastic and metal spirals in various diameters (Various tabs available for different diameters) Tedpfx Aswgy I Iehuef Other bookbinding machines available: Hang eyeleting machine, Tränklein corner rounding machine, Kroll punching machine, etc. Price plus VAT EXW. All information is subject to change without notice. Subject to prior sale. Dealership. This sale is made without any warranty.

Condition: used, Prakma book cover rounding machine ( Case Rounding machine) Tjdpfsty Tr Eox Ahujf Very good condition, full function. Various rounding radii available. Other machines available (riveting machine, eyeletting machine, bundling machine, corner rounding machine, drilling machine, stitching machine) More machines on stock. Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: used, Year of construction: 2001, ATS-CE 340/30 bundling machine Banding machine with temperature welding Band width 30mm Tedpfx Ahsvthwfeuof Paper and film can be used as banding material Cooling time setting Extras: Jumbo dispenser 2x available. Price plus VAT EXW. All information without guarantee. Subject to prior sale. Dealer business. The sale is made without any warranty.

Condition: used, Year of construction: 1999, High-performance Wire-O coil cutter from Renz Adjustable number of loops Tsdpfx Ahstp Ra Ioujf Adjustable speed incl. various guide rails for the most common Wire-o diameters 5/8 , 7/8 , 3/4 , 3/16 etc. ..... + transport gears 2:1 and 3:1 Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.